[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAJM55Z9nJKOEawvxHwUt5w0FKYGw9pBN9_YtOCHjzFGTQ_HvAA@mail.gmail.com>
Date: Tue, 7 May 2024 03:11:10 -0700
From: Emil Renner Berthing <emil.renner.berthing@...onical.com>
To: Xingyu Wu <xingyu.wu@...rfivetech.com>, Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, Conor Dooley <conor@...nel.org>,
Emil Renner Berthing <emil.renner.berthing@...onical.com>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc: Paul Walmsley <paul.walmsley@...ive.com>, Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>, Hal Feng <hal.feng@...rfivetech.com>,
linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
linux-riscv@...ts.infradead.org, devicetree@...r.kernel.org
Subject: Re: [PATCH v5 1/2] clk: starfive: jh7110-sys: Add notifier for PLL0 clock
Xingyu Wu wrote:
> Add notifier function for PLL0 clock. In the function, the cpu_root clock
> should be operated by saving its current parent and setting a new safe
> parent (osc clock) before setting the PLL0 clock rate. After setting PLL0
> rate, it should be switched back to the original parent clock.
>
> Fixes: e2c510d6d630 ("riscv: dts: starfive: Add cpu scaling for JH7110 SoC")
> Signed-off-by: Xingyu Wu <xingyu.wu@...rfivetech.com>
This looks much better, thanks!
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@...onical.com>
> ---
> .../clk/starfive/clk-starfive-jh7110-sys.c | 31 ++++++++++++++++++-
> drivers/clk/starfive/clk-starfive-jh71x0.h | 2 ++
> 2 files changed, 32 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/starfive/clk-starfive-jh7110-sys.c b/drivers/clk/starfive/clk-starfive-jh7110-sys.c
> index 8f5e5abfa178..dafa3ae71751 100644
> --- a/drivers/clk/starfive/clk-starfive-jh7110-sys.c
> +++ b/drivers/clk/starfive/clk-starfive-jh7110-sys.c
> @@ -385,6 +385,32 @@ int jh7110_reset_controller_register(struct jh71x0_clk_priv *priv,
> }
> EXPORT_SYMBOL_GPL(jh7110_reset_controller_register);
>
> +/*
> + * This clock notifier is called when the rate of PLL0 clock is to be changed.
> + * The cpu_root clock should save the curent parent clock and swicth its parent
> + * clock to osc before PLL0 rate will be changed. Then swicth its parent clock
> + * back after the PLL0 rate is completed.
> + */
> +static int jh7110_pll0_clk_notifier_cb(struct notifier_block *nb,
> + unsigned long action, void *data)
> +{
> + struct jh71x0_clk_priv *priv = container_of(nb, struct jh71x0_clk_priv, pll_clk_nb);
> + struct clk *cpu_root = priv->reg[JH7110_SYSCLK_CPU_ROOT].hw.clk;
> + int ret = 0;
> +
> + if (action == PRE_RATE_CHANGE) {
> + struct clk *osc = clk_get(priv->dev, "osc");
> +
> + priv->original_clk = clk_get_parent(cpu_root);
> + ret = clk_set_parent(cpu_root, osc);
> + clk_put(osc);
> + } else if (action == POST_RATE_CHANGE) {
> + ret = clk_set_parent(cpu_root, priv->original_clk);
> + }
> +
> + return notifier_from_errno(ret);
> +}
> +
> static int __init jh7110_syscrg_probe(struct platform_device *pdev)
> {
> struct jh71x0_clk_priv *priv;
> @@ -413,7 +439,10 @@ static int __init jh7110_syscrg_probe(struct platform_device *pdev)
> if (IS_ERR(priv->pll[0]))
> return PTR_ERR(priv->pll[0]);
> } else {
> - clk_put(pllclk);
> + priv->pll_clk_nb.notifier_call = jh7110_pll0_clk_notifier_cb;
> + ret = clk_notifier_register(pllclk, &priv->pll_clk_nb);
> + if (ret)
> + return ret;
> priv->pll[0] = NULL;
> }
>
> diff --git a/drivers/clk/starfive/clk-starfive-jh71x0.h b/drivers/clk/starfive/clk-starfive-jh71x0.h
> index 23e052fc1549..e3f441393e48 100644
> --- a/drivers/clk/starfive/clk-starfive-jh71x0.h
> +++ b/drivers/clk/starfive/clk-starfive-jh71x0.h
> @@ -114,6 +114,8 @@ struct jh71x0_clk_priv {
> spinlock_t rmw_lock;
> struct device *dev;
> void __iomem *base;
> + struct clk *original_clk;
> + struct notifier_block pll_clk_nb;
> struct clk_hw *pll[3];
> struct jh71x0_clk reg[];
> };
> --
> 2.25.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
Powered by blists - more mailing lists