[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAJM55Z-p9OLYCWHzhQ9HJ3vEt+u-qx0kxcWmGnO8FoarxJQiQQ@mail.gmail.com>
Date: Tue, 7 May 2024 03:13:35 -0700
From: Emil Renner Berthing <emil.renner.berthing@...onical.com>
To: Xingyu Wu <xingyu.wu@...rfivetech.com>, Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, Conor Dooley <conor@...nel.org>,
Emil Renner Berthing <emil.renner.berthing@...onical.com>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc: Paul Walmsley <paul.walmsley@...ive.com>, Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>, Hal Feng <hal.feng@...rfivetech.com>,
linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
linux-riscv@...ts.infradead.org, devicetree@...r.kernel.org
Subject: Re: [PATCH v5 2/2] riscv: dts: starfive: visionfive-2: Fix lower rate
of CPUfreq by setting PLL0 rate to 1.5GHz
Xingyu Wu wrote:
> CPUfreq supports 4 cpu frequency loads on 375/500/750/1500MHz.
> But now PLL0 rate is 1GHz and the cpu frequency loads become
> 333/500/500/1000MHz in fact.
>
> The PLL0 rate should be default set to 1.5GHz and set the
> cpu_core rate to 500MHz in safe.
>
> Fixes: e2c510d6d630 ("riscv: dts: starfive: Add cpu scaling for JH7110 SoC")
> Signed-off-by: Xingyu Wu <xingyu.wu@...rfivetech.com>
This should really be based on Conor's riscv-dt-for-next branch, eg. the change
should be to the new jh7110-common.dtsi instead since the Milk-V Mars board
would most likely also benefit from this change.
In any case:
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@...onical.com>
> ---
> .../boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> index 45b58b6f3df8..28981b267de4 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> @@ -390,6 +390,12 @@ spi_dev0: spi@0 {
> };
> };
>
> +&syscrg {
> + assigned-clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>,
> + <&pllclk JH7110_PLLCLK_PLL0_OUT>;
> + assigned-clock-rates = <500000000>, <1500000000>;
> +};
> +
> &sysgpio {
> i2c0_pins: i2c0-0 {
> i2c-pins {
> --
> 2.25.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
Powered by blists - more mailing lists