[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <a70d141f-cec1-49b5-99d0-0f9e5f722afd@zhaoxin.com>
Date: Thu, 9 May 2024 16:39:38 +0800
From: LeoLiu-oc <leoliu-oc@...oxin.com>
To: Bjorn Helgaas <helgaas@...nel.org>
CC: <rafael@...nel.org>, <lenb@...nel.org>, <james.morse@....com>,
<tony.luck@...el.com>, <bp@...en8.de>, <bhelgaas@...gle.com>,
<robert.moore@...el.com>, <linux-acpi@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-pci@...r.kernel.org>,
<acpica-devel@...ts.linux.dev>, <CobeChen@...oxin.com>,
<TonyWWang@...oxin.com>, <ErosZhang@...oxin.com>, <LeoLiu@...oxin.com>
Subject: Re: [PATCH v2 0/3] Parse the HEST PCIe AER and set to relevant
registers
在 2024/5/9 6:04, Bjorn Helgaas 写道:
>
>
> [这封邮件来自外部发件人 谨防风险]
>
> On Mon, Dec 18, 2023 at 11:04:27AM +0800, LeoLiu-oc wrote:
>> From: LeoLiuoc <LeoLiu-oc@...oxin.com>
>>
>> According to the Section 18.3.2.4, 18.3.2.5 and 18.3.2.6 in ACPI SPEC
>> r6.5, the register value form HEST PCI Express AER Structure should be
>> written to relevant PCIe Device's AER Capabilities.So the purpose of the
>> patch set is to extract register value from HEST PCI Express AER
>> structures and program them into PCIe Device's AER registers. Refer to the
>> ACPI SPEC r6.5 for the more detailed description. This patch is an
>> effective supplement to _HPP/_HPX method when the Firmware does not
>> support the _HPP/_HPX method and can be specially configured for the AER
>> register of the specific device.
>>
>> ---
>>
>> v1->v2:
>> - Move the definition of structure "hest_parse_aer_info" to file apei.h.
>
> Just noticed that this removes the ACPICA header dependency problem
> that Rafael pointed out. This also applies (with minor offsets) to
> v6.9-rc1, so it's not very stale. We're almost to the v6.9 final
> release, so when v6.10-rc1 is tagged, can you rebase to that and
> repost this?
>
Thank you very much for your review. I will make a new patch version
based on the kernel v6.10-rc1 according to your suggestion.
> I assume you have a platform that uses this. It would be good to
> mention that in the commit log of patches 1 and 3 so we have some idea
> of where it's useful and where changes need to be tested.
>
Okay, I will add hardware suitability information for this patch to the
commit log.
Yours sincerely
Leoliu-oc
>> LeoLiuoc (3):
>> ACPI/APEI: Add hest_parse_pcie_aer()
>> PCI: Add AER bits #defines for PCIe to PCI/PCI-X Bridge
>> PCI/ACPI: Add pci_acpi_program_hest_aer_params()
>>
>> drivers/acpi/apei/hest.c | 69 +++++++++++++++++++++++-
>> drivers/pci/pci-acpi.c | 98 +++++++++++++++++++++++++++++++++++
>> drivers/pci/pci.h | 9 ++++
>> drivers/pci/probe.c | 1 +
>> include/acpi/apei.h | 17 ++++++
>> include/uapi/linux/pci_regs.h | 3 ++
>> 6 files changed, 195 insertions(+), 2 deletions(-)
>>
>> --
>> 2.34.1
>>
Powered by blists - more mailing lists