linux-kernel - Re: [PATCH 2/2] net: phy: dp83869: Fix RGMII-SGMII and 1000BASE-X

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date: Tue, 14 May 2024 14:05:01 +0100
From: "Russell King (Oracle)" <linux@...linux.org.uk>
To: Thomas Gessler <thomas.gessler@...eckmann-gmbh.de>
Cc: Andrew Lunn <andrew@...n.ch>, Heiner Kallweit <hkallweit1@...il.com>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
	MD Danish Anwar <danishanwar@...com>,
	Ravi Gunasekaran <r-gunasekaran@...com>
Subject: Re: [PATCH 2/2] net: phy: dp83869: Fix RGMII-SGMII and 1000BASE-X

On Tue, May 14, 2024 at 02:27:28PM +0200, Thomas Gessler wrote:
> The PHY supports multiple modes of which not all are properly
> implemented by the driver. In the case of the RGMII-to-SGMII and
> 1000BASE-X modes, this was primarily due to the use of non-standard
> registers for auto-negotiation settings and link status. This patch adds
> device-specific get_features(), config_aneg(), aneg_done(), and
> read_status() functions for these modes. They are based on the genphy_*
> versions with the correct registers and fall back to the genphy_*
> versions for other modes.

I'm reading this, and wondering... do you have a use case for this,
or are you adding it because "the PHY supports this" ?

> The RGMII-to-SGMII mode is special, because the chip does not really act
> as a PHY in this mode but rather as a bridge. It requires a connected
> SGMII PHY and gets the negotiated speed and duplex from it through SGMII
> auto-negotiation. To use the DP83869 as a virtual PHY, we assume that
> the connected SGMII PHY supports 10/100/1000M half/full duplex and
> therefore support and always advertise those settings.

I call this configuration a "stacked PHY" system, and you're right that
it's a setup that we have no support for at the moment. We assume that
there is exactly one PHY in each network device.

I think we would need a lot of re-architecting of the phylib <-> netdev
linkage to allow stacked PHY systems to work sensibly.

If you don't have a use case for this, then it would be better not to
add support for it at this stage, otherwise it may restrict what we can
do in the future when coming up with a solution for stacked PHY support.
Alternatively, you may wish to discuss this topic and work on a
solution.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!