linux-kernel - [PATCH] thermal/drivers/mediatek/lvts_thermal: Remove filtered mode for mt8188

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240515-mtk-thermal-mt8188-mode-fix-v1-1-e656b310b67f@baylibre.com>
Date: Wed, 15 May 2024 17:03:25 +0200
From: Julien Panis <jpanis@...libre.com>
To: "Rafael J. Wysocki" <rafael@...nel.org>, 
 Daniel Lezcano <daniel.lezcano@...aro.org>, Zhang Rui <rui.zhang@...el.com>, 
 Lukasz Luba <lukasz.luba@....com>, 
 Matthias Brugger <matthias.bgg@...il.com>, 
 AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>, 
 Nicolas Pitre <npitre@...libre.com>
Cc: linux-pm@...r.kernel.org, linux-kernel@...r.kernel.org, 
 linux-arm-kernel@...ts.infradead.org, linux-mediatek@...ts.infradead.org, 
 Julien Panis <jpanis@...libre.com>
Subject: [PATCH] thermal/drivers/mediatek/lvts_thermal: Remove filtered
 mode for mt8188

Filtered mode is not supported on mt8188 SoC and is the source of bad
results. Move to immediate mode which provides good temperatures.

Signed-off-by: Julien Panis <jpanis@...libre.com>
---
Filtered mode was set by mistake and difficulties with the test setup
prevented from catching this earlier. Use default mode (immediate mode)
instead.
---
 drivers/thermal/mediatek/lvts_thermal.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index 0bb3a495b56e..82c355c466cf 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -1458,7 +1458,6 @@ static const struct lvts_ctrl_data mt8188_lvts_mcu_data_ctrl[] = {
 		},
 		VALID_SENSOR_MAP(1, 1, 1, 1),
 		.offset = 0x0,
-		.mode = LVTS_MSR_FILTERED_MODE,
 	},
 	{
 		.lvts_sensor = {
@@ -1469,7 +1468,6 @@ static const struct lvts_ctrl_data mt8188_lvts_mcu_data_ctrl[] = {
 		},
 		VALID_SENSOR_MAP(1, 1, 0, 0),
 		.offset = 0x100,
-		.mode = LVTS_MSR_FILTERED_MODE,
 	}
 };

@@ -1483,7 +1481,6 @@ static const struct lvts_ctrl_data mt8188_lvts_ap_data_ctrl[] = {
 		},
 		VALID_SENSOR_MAP(0, 1, 0, 0),
 		.offset = 0x0,
-		.mode = LVTS_MSR_FILTERED_MODE,
 	},
 	{
 		.lvts_sensor = {
@@ -1496,7 +1493,6 @@ static const struct lvts_ctrl_data mt8188_lvts_ap_data_ctrl[] = {
 		},
 		VALID_SENSOR_MAP(1, 1, 1, 0),
 		.offset = 0x100,
-		.mode = LVTS_MSR_FILTERED_MODE,
 	},
 	{
 		.lvts_sensor = {
@@ -1507,7 +1503,6 @@ static const struct lvts_ctrl_data mt8188_lvts_ap_data_ctrl[] = {
 		},
 		VALID_SENSOR_MAP(1, 1, 0, 0),
 		.offset = 0x200,
-		.mode = LVTS_MSR_FILTERED_MODE,
 	},
 	{
 		.lvts_sensor = {
@@ -1518,7 +1513,6 @@ static const struct lvts_ctrl_data mt8188_lvts_ap_data_ctrl[] = {
 		},
 		VALID_SENSOR_MAP(1, 1, 0, 0),
 		.offset = 0x300,
-		.mode = LVTS_MSR_FILTERED_MODE,
 	}
 };

---
base-commit: 82d92a9a1b9ea0ea52aff27cddd05009b4edad49
change-id: 20240515-mtk-thermal-mt8188-mode-fix-e583d9a31da1

Best regards,
-- 
Julien Panis <jpanis@...libre.com>