[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <06np453s-183n-68qn-o33o-97q4163oro4s@onlyvoer.pbz>
Date: Wed, 15 May 2024 11:22:49 -0400 (EDT)
From: Nicolas Pitre <npitre@...libre.com>
To: Julien Panis <jpanis@...libre.com>
cc: "Rafael J. Wysocki" <rafael@...nel.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Zhang Rui <rui.zhang@...el.com>, Lukasz Luba <lukasz.luba@....com>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
linux-pm@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-mediatek@...ts.infradead.org
Subject: Re: [PATCH] thermal/drivers/mediatek/lvts_thermal: Remove filtered
mode for mt8188
On Wed, 15 May 2024, Julien Panis wrote:
> Filtered mode is not supported on mt8188 SoC and is the source of bad
> results. Move to immediate mode which provides good temperatures.
>
> Signed-off-by: Julien Panis <jpanis@...libre.com>
Reviewed-by: Nicolas Pitre <npitre@...libre.com>
> ---
> Filtered mode was set by mistake and difficulties with the test setup
> prevented from catching this earlier. Use default mode (immediate mode)
> instead.
> ---
> drivers/thermal/mediatek/lvts_thermal.c | 6 ------
> 1 file changed, 6 deletions(-)
>
> diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
> index 0bb3a495b56e..82c355c466cf 100644
> --- a/drivers/thermal/mediatek/lvts_thermal.c
> +++ b/drivers/thermal/mediatek/lvts_thermal.c
> @@ -1458,7 +1458,6 @@ static const struct lvts_ctrl_data mt8188_lvts_mcu_data_ctrl[] = {
> },
> VALID_SENSOR_MAP(1, 1, 1, 1),
> .offset = 0x0,
> - .mode = LVTS_MSR_FILTERED_MODE,
> },
> {
> .lvts_sensor = {
> @@ -1469,7 +1468,6 @@ static const struct lvts_ctrl_data mt8188_lvts_mcu_data_ctrl[] = {
> },
> VALID_SENSOR_MAP(1, 1, 0, 0),
> .offset = 0x100,
> - .mode = LVTS_MSR_FILTERED_MODE,
> }
> };
>
> @@ -1483,7 +1481,6 @@ static const struct lvts_ctrl_data mt8188_lvts_ap_data_ctrl[] = {
> },
> VALID_SENSOR_MAP(0, 1, 0, 0),
> .offset = 0x0,
> - .mode = LVTS_MSR_FILTERED_MODE,
> },
> {
> .lvts_sensor = {
> @@ -1496,7 +1493,6 @@ static const struct lvts_ctrl_data mt8188_lvts_ap_data_ctrl[] = {
> },
> VALID_SENSOR_MAP(1, 1, 1, 0),
> .offset = 0x100,
> - .mode = LVTS_MSR_FILTERED_MODE,
> },
> {
> .lvts_sensor = {
> @@ -1507,7 +1503,6 @@ static const struct lvts_ctrl_data mt8188_lvts_ap_data_ctrl[] = {
> },
> VALID_SENSOR_MAP(1, 1, 0, 0),
> .offset = 0x200,
> - .mode = LVTS_MSR_FILTERED_MODE,
> },
> {
> .lvts_sensor = {
> @@ -1518,7 +1513,6 @@ static const struct lvts_ctrl_data mt8188_lvts_ap_data_ctrl[] = {
> },
> VALID_SENSOR_MAP(1, 1, 0, 0),
> .offset = 0x300,
> - .mode = LVTS_MSR_FILTERED_MODE,
> }
> };
>
>
> ---
> base-commit: 82d92a9a1b9ea0ea52aff27cddd05009b4edad49
> change-id: 20240515-mtk-thermal-mt8188-mode-fix-e583d9a31da1
>
> Best regards,
> --
> Julien Panis <jpanis@...libre.com>
>
>
Powered by blists - more mailing lists