[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <f0a59da9-7b1a-4a11-bc3e-e39c9fa4e3bd@collabora.com>
Date: Thu, 16 May 2024 11:08:38 +0200
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
To: Julien Panis <jpanis@...libre.com>, "Rafael J. Wysocki"
<rafael@...nel.org>, Daniel Lezcano <daniel.lezcano@...aro.org>,
Zhang Rui <rui.zhang@...el.com>, Lukasz Luba <lukasz.luba@....com>,
Matthias Brugger <matthias.bgg@...il.com>,
Nicolas Pitre <npitre@...libre.com>
Cc: linux-pm@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-mediatek@...ts.infradead.org
Subject: Re: [PATCH] thermal/drivers/mediatek/lvts_thermal: Remove filtered
mode for mt8188
Il 15/05/24 17:03, Julien Panis ha scritto:
> Filtered mode is not supported on mt8188 SoC and is the source of bad
> results. Move to immediate mode which provides good temperatures.
>
> Signed-off-by: Julien Panis <jpanis@...libre.com>
Please add the relevant Fixes tag, after which:
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
> ---
> Filtered mode was set by mistake and difficulties with the test setup
> prevented from catching this earlier. Use default mode (immediate mode)
> instead.
> ---
> drivers/thermal/mediatek/lvts_thermal.c | 6 ------
> 1 file changed, 6 deletions(-)
>
> diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
> index 0bb3a495b56e..82c355c466cf 100644
> --- a/drivers/thermal/mediatek/lvts_thermal.c
> +++ b/drivers/thermal/mediatek/lvts_thermal.c
> @@ -1458,7 +1458,6 @@ static const struct lvts_ctrl_data mt8188_lvts_mcu_data_ctrl[] = {
> },
> VALID_SENSOR_MAP(1, 1, 1, 1),
> .offset = 0x0,
> - .mode = LVTS_MSR_FILTERED_MODE,
> },
> {
> .lvts_sensor = {
> @@ -1469,7 +1468,6 @@ static const struct lvts_ctrl_data mt8188_lvts_mcu_data_ctrl[] = {
> },
> VALID_SENSOR_MAP(1, 1, 0, 0),
> .offset = 0x100,
> - .mode = LVTS_MSR_FILTERED_MODE,
> }
> };
>
> @@ -1483,7 +1481,6 @@ static const struct lvts_ctrl_data mt8188_lvts_ap_data_ctrl[] = {
> },
> VALID_SENSOR_MAP(0, 1, 0, 0),
> .offset = 0x0,
> - .mode = LVTS_MSR_FILTERED_MODE,
> },
> {
> .lvts_sensor = {
> @@ -1496,7 +1493,6 @@ static const struct lvts_ctrl_data mt8188_lvts_ap_data_ctrl[] = {
> },
> VALID_SENSOR_MAP(1, 1, 1, 0),
> .offset = 0x100,
> - .mode = LVTS_MSR_FILTERED_MODE,
> },
> {
> .lvts_sensor = {
> @@ -1507,7 +1503,6 @@ static const struct lvts_ctrl_data mt8188_lvts_ap_data_ctrl[] = {
> },
> VALID_SENSOR_MAP(1, 1, 0, 0),
> .offset = 0x200,
> - .mode = LVTS_MSR_FILTERED_MODE,
> },
> {
> .lvts_sensor = {
> @@ -1518,7 +1513,6 @@ static const struct lvts_ctrl_data mt8188_lvts_ap_data_ctrl[] = {
> },
> VALID_SENSOR_MAP(1, 1, 0, 0),
> .offset = 0x300,
> - .mode = LVTS_MSR_FILTERED_MODE,
> }
> };
>
>
> ---
> base-commit: 82d92a9a1b9ea0ea52aff27cddd05009b4edad49
> change-id: 20240515-mtk-thermal-mt8188-mode-fix-e583d9a31da1
>
> Best regards,
Powered by blists - more mailing lists