[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <69c3517c-0fa4-4e0d-9515-21adfb6730a8@pengutronix.de>
Date: Thu, 16 May 2024 13:46:33 +0200
From: Ahmad Fatoum <a.fatoum@...gutronix.de>
To: Marek Vasut <marex@...x.de>, Francesco Dolcini <francesco@...cini.it>
Cc: Rob Herring <robh@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
devicetree@...r.kernel.org, Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>, linux-kernel@...r.kernel.org,
imx@...ts.linux.dev, kernel@...electronics.com,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Fabio Estevam
<festevam@...il.com>, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH] arm64: dts: imx8mp: Enable HDMI on i.MX8MP DHCOM PDK2 and
PDK3
On 16.05.24 13:44, Marek Vasut wrote:
> On 5/16/24 1:36 PM, Ahmad Fatoum wrote:
>> Hello Marek,
>
> Hi,
>
>> On 16.05.24 13:14, Marek Vasut wrote:
>>> On 5/16/24 10:00 AM, Francesco Dolcini wrote:
>>>> Hello Marek,
>>>
>>> Hi,
>>>
>>>> On Tue, May 14, 2024 at 03:06:42AM +0200, Marek Vasut wrote:
>>>>> Enable HDMI output on i.MX8MP DHCOM PDK2 and PDK3. The I2C5 on PDK2 and
>>>>> I2C mux port 1 on PDK3 respectively are used in regular I2C mode instead
>>>>> of HDMI DDC mode to permit connection of other I2C devices on those buses.
>>>>
>>>> Are you able to read the HDMI EDID with such configuration? I have the
>>>> patch ready for verdin imx8mp, I just did not have time to figure out
>>>> this last details.
>>>
>>> Yes with ddc-i2c-bus in hdmi_tx{} node, no with ddc-i2c-bus in connector node. Maybe that's what you're running into ? The DW HDMI core needs the ddc-i2c-bus property in hdmi_tx{} node if you use non-native I2C bus for the DDC channel.
>>
>> What benefit does the hdmi-connector provide over just omitting it?
>> Just for documentation purposes?
>
> I was under the impression describing the hardware in DT in full was the best practice (TM), hence it is in full here.
Sure, I am just wondering what effect, if any, it has in how Linux interprets
the device tree. I have an i.MX8MP board with HDMI as well, but without
connector (yet).
Cheers,
Ahmad
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Powered by blists - more mailing lists