[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240516115743.GA6663@francesco-nb>
Date: Thu, 16 May 2024 13:57:43 +0200
From: Francesco Dolcini <francesco@...cini.it>
To: Marek Vasut <marex@...x.de>
Cc: Francesco Dolcini <francesco@...cini.it>,
linux-arm-kernel@...ts.infradead.org,
Conor Dooley <conor+dt@...nel.org>,
Fabio Estevam <festevam@...il.com>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Rob Herring <robh@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Shawn Guo <shawnguo@...nel.org>, devicetree@...r.kernel.org,
imx@...ts.linux.dev, kernel@...electronics.com,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] arm64: dts: imx8mp: Enable HDMI on i.MX8MP DHCOM PDK2
and PDK3
Hello,
On Thu, May 16, 2024 at 01:14:04PM +0200, Marek Vasut wrote:
> On 5/16/24 10:00 AM, Francesco Dolcini wrote:
> > On Tue, May 14, 2024 at 03:06:42AM +0200, Marek Vasut wrote:
> > > Enable HDMI output on i.MX8MP DHCOM PDK2 and PDK3. The I2C5 on PDK2 and
> > > I2C mux port 1 on PDK3 respectively are used in regular I2C mode instead
> > > of HDMI DDC mode to permit connection of other I2C devices on those buses.
> >
> > Are you able to read the HDMI EDID with such configuration? I have the
> > patch ready for verdin imx8mp, I just did not have time to figure out
> > this last details.
>
> Yes with ddc-i2c-bus in hdmi_tx{} node, no with ddc-i2c-bus in connector
> node. Maybe that's what you're running into ? The DW HDMI core needs the
> ddc-i2c-bus property in hdmi_tx{} node if you use non-native I2C bus for the
> DDC channel.
Yes, that's it. Thanks!
Francesco
Powered by blists - more mailing lists