[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240520101149.3243151-2-s-vadapalli@ti.com>
Date: Mon, 20 May 2024 15:41:47 +0530
From: Siddharth Vadapalli <s-vadapalli@...com>
To: <nm@...com>, <vigneshr@...com>, <kristo@...nel.org>, <robh@...nel.org>,
<krzk+dt@...nel.org>, <conor+dt@...nel.org>
CC: <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <danishanwar@...com>,
<srk@...com>, <s-vadapalli@...com>
Subject: [PATCH v2 1/3] arm64: dts: ti: k3-j784s4-main: Add PCIe nodes
TI's J784S4 has two instances of Gen3 x4 Lane PCIe Controllers namely
PCIE0 and PCIE1. Add support for the Root Complex Mode of operation of
these PCIe instances.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@...com>
---
v1:
https://lore.kernel.org/r/20240129114749.1197579-2-s-vadapalli@ti.com/
Changes since v1:
- Added "pcie0_ctrl" and "pcie1_ctrl" nodes within the "scm_conf" node
in order to reuse the existing "ti,syscon-pcie-ctrl" property without
having to map the entire "scm_conf" region for configuring the PCIe
Control registers pointed to by the "pcie0_ctrl" and "pcie1_ctrl"
nodes.
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 94 ++++++++++++++++++++++
1 file changed, 94 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index 6a4554c6c9c1..c99bd1284c28 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -48,6 +48,16 @@ scm_conf: bus@...000 {
#size-cells = <1>;
ranges = <0x00 0x00 0x00100000 0x1c000>;
+ pcie0_ctrl: pcie0-ctrl@...0 {
+ compatible = "ti,j784s4-pcie-ctrl", "syscon";
+ reg = <0x4070 0x4>;
+ };
+
+ pcie1_ctrl: pcie1-ctrl@...4 {
+ compatible = "ti,j784s4-pcie-ctrl", "syscon";
+ reg = <0x4074 0x4>;
+ };
+
serdes_ln_ctrl: mux-controller@...0 {
compatible = "reg-mux";
reg = <0x00004080 0x30>;
@@ -907,6 +917,90 @@ main_sdhci1: mmc@...0000 {
status = "disabled";
};
+ pcie0_rc: pcie@...0000 {
+ compatible = "ti,j784s4-pcie-host";
+ reg = <0x00 0x02900000 0x00 0x1000>,
+ <0x00 0x02907000 0x00 0x400>,
+ <0x00 0x0d000000 0x00 0x00800000>,
+ <0x00 0x10000000 0x00 0x00001000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+ interrupt-names = "link_state";
+ interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
+ device_type = "pci";
+ ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x0>;
+ max-link-speed = <3>;
+ num-lanes = <4>;
+ power-domains = <&k3_pds 332 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 332 0>;
+ clock-names = "fck";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0xff>;
+ vendor-id = <0x104c>;
+ device-id = <0xb012>;
+ msi-map = <0x0 &gic_its 0x0 0x10000>;
+ dma-coherent;
+ ranges = <0x01000000 0x0 0x10001000 0x0 0x10001000 0x0 0x0010000>,
+ <0x02000000 0x0 0x10011000 0x0 0x10011000 0x0 0x7fef000>;
+ dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+ <0 0 0 2 &pcie0_intc 0>,
+ <0 0 0 3 &pcie0_intc 0>,
+ <0 0 0 4 &pcie0_intc 0>;
+ status = "disabled";
+
+ pcie0_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 312 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+
+ pcie1_rc: pcie@...0000 {
+ compatible = "ti,j784s4-pcie-host";
+ reg = <0x00 0x02910000 0x00 0x1000>,
+ <0x00 0x02917000 0x00 0x400>,
+ <0x00 0x0d800000 0x00 0x00800000>,
+ <0x00 0x18000000 0x00 0x00001000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+ interrupt-names = "link_state";
+ interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+ device_type = "pci";
+ ti,syscon-pcie-ctrl = <&pcie1_ctrl 0x0>;
+ max-link-speed = <3>;
+ num-lanes = <4>;
+ power-domains = <&k3_pds 333 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 333 0>;
+ clock-names = "fck";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0xff>;
+ vendor-id = <0x104c>;
+ device-id = <0xb012>;
+ msi-map = <0x0 &gic_its 0x10000 0x10000>;
+ dma-coherent;
+ ranges = <0x01000000 0x0 0x18001000 0x00 0x18001000 0x0 0x0010000>,
+ <0x02000000 0x0 0x18011000 0x00 0x18011000 0x0 0x7fef000>;
+ dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+ <0 0 0 2 &pcie1_intc 0>,
+ <0 0 0 3 &pcie1_intc 0>,
+ <0 0 0 4 &pcie1_intc 0>;
+ status = "disabled";
+
+ pcie1_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 324 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+
serdes_wiz0: wiz@...0000 {
compatible = "ti,j784s4-wiz-10g";
#address-cells = <1>;
--
2.40.1
Powered by blists - more mailing lists