| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240520203907.749347-1-Frank.Li@nxp.com>
Date: Mon, 20 May 2024 16:39:06 -0400
From: Frank Li <Frank.Li@....com>
To: Vinod Koul <vkoul@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
dmaengine@...r.kernel.org (open list:DMA GENERIC OFFLOAD ENGINE SUBSYSTEM),
devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS),
linux-kernel@...r.kernel.org (open list)
Cc: imx@...ts.linux.dev
Subject: [PATCH 1/1] dt-bindings: fsl-qdma: Convert to yaml format
Convert binding doc from txt to yaml.
Re-order interrupt-names to align example.
Add #dma-cell in example.
Change 'reg' in example to 32bit address.
Signed-off-by: Frank Li <Frank.Li@....com>
---
Notes:
Pass dt_binding_check:
make dt_binding_check DT_SCHEMA_FILES=fsl-qdma.yaml
SCHEMA Documentation/devicetree/bindings/processed-schema.json
CHKDT Documentation/devicetree/bindings
LINT Documentation/devicetree/bindings
DTEX Documentation/devicetree/bindings/dma/fsl-qdma.example.dts
DTC_CHK Documentation/devicetree/bindings/dma/fsl-qdma.example.dtb
.../devicetree/bindings/dma/fsl-qdma.txt | 58 ---------
.../devicetree/bindings/dma/fsl-qdma.yaml | 110 ++++++++++++++++++
2 files changed, 110 insertions(+), 58 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/dma/fsl-qdma.txt
create mode 100644 Documentation/devicetree/bindings/dma/fsl-qdma.yaml
diff --git a/Documentation/devicetree/bindings/dma/fsl-qdma.txt b/Documentation/devicetree/bindings/dma/fsl-qdma.txt
deleted file mode 100644
index da371c4d406ce..0000000000000
--- a/Documentation/devicetree/bindings/dma/fsl-qdma.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-NXP Layerscape SoC qDMA Controller
-==================================
-
-This device follows the generic DMA bindings defined in dma/dma.txt.
-
-Required properties:
-
-- compatible: Must be one of
- "fsl,ls1021a-qdma": for LS1021A Board
- "fsl,ls1028a-qdma": for LS1028A Board
- "fsl,ls1043a-qdma": for ls1043A Board
- "fsl,ls1046a-qdma": for ls1046A Board
-- reg: Should contain the register's base address and length.
-- interrupts: Should contain a reference to the interrupt used by this
- device.
-- interrupt-names: Should contain interrupt names:
- "qdma-queue0": the block0 interrupt
- "qdma-queue1": the block1 interrupt
- "qdma-queue2": the block2 interrupt
- "qdma-queue3": the block3 interrupt
- "qdma-error": the error interrupt
-- fsl,dma-queues: Should contain number of queues supported.
-- dma-channels: Number of DMA channels supported
-- block-number: the virtual block number
-- block-offset: the offset of different virtual block
-- status-sizes: status queue size of per virtual block
-- queue-sizes: command queue size of per virtual block, the size number
- based on queues
-
-Optional properties:
-
-- dma-channels: Number of DMA channels supported by the controller.
-- big-endian: If present registers and hardware scatter/gather descriptors
- of the qDMA are implemented in big endian mode, otherwise in little
- mode.
-
-Examples:
-
- qdma: dma-controller@...0000 {
- compatible = "fsl,ls1021a-qdma";
- reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */
- <0x0 0x8389000 0x0 0x1000>, /* Status regs */
- <0x0 0x838a000 0x0 0x2000>; /* Block regs */
- interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "qdma-error",
- "qdma-queue0", "qdma-queue1";
- dma-channels = <8>;
- block-number = <2>;
- block-offset = <0x1000>;
- fsl,dma-queues = <2>;
- status-sizes = <64>;
- queue-sizes = <64 64>;
- big-endian;
- };
-
-DMA clients must use the format described in dma/dma.txt file.
diff --git a/Documentation/devicetree/bindings/dma/fsl-qdma.yaml b/Documentation/devicetree/bindings/dma/fsl-qdma.yaml
new file mode 100644
index 0000000000000..e6d24670ff893
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl-qdma.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/fsl-qdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Layerscape SoC qDMA Controller
+
+maintainers:
+ - Frank Li <Frank.Li@....com>
+
+properties:
+ compatible:
+ enum:
+ - fsl,ls1021a-qdma
+ - fsl,ls1028a-qdma
+ - fsl,ls1043a-qdma
+ - fsl,ls1046a-qdma
+
+ reg:
+ items:
+ - description: Controller regs
+ - description: Status regs
+ - description: Block regs
+
+ interrupts:
+ minItems: 2
+ maxItems: 5
+
+ interrupt-names:
+ minItems: 2
+ items:
+ - const: qdma-error
+ - const: qdma-queue0
+ - const: qdma-queue1
+ - const: qdma-queue2
+ - const: qdma-queue3
+
+ dma-channels:
+ minItems: 1
+ maxItems: 64
+
+ fsl,dma-queues:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Should contain number of queues supported.
+
+ block-number:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: the virtual block number
+
+ block-offset:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: the offset of different virtual block
+
+ status-sizes:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: status queue size of per virtual block
+
+ queue-sizes:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ command queue size of per virtual block, the size number
+ based on queues
+
+ big-endian:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ If present registers and hardware scatter/gather descriptors
+ of the qDMA are implemented in big endian mode, otherwise in little
+ mode.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - fsl,dma-queues
+ - block-number
+ - block-offset
+ - status-sizes
+ - queue-sizes
+
+unevaluatedProperties: false
+
+allOf:
+ - $ref: dma-controller.yaml#
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ dma-controller@...0000 {
+ compatible = "fsl,ls1021a-qdma";
+ reg = <0x8388000 0x1000>, /* Controller regs */
+ <0x8389000 0x1000>, /* Status regs */
+ <0x838a000 0x2000>; /* Block regs */
+ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "qdma-error", "qdma-queue0", "qdma-queue1";
+ #dma-cells = <1>;
+ dma-channels = <8>;
+ block-number = <2>;
+ block-offset = <0x1000>;
+ status-sizes = <64>;
+ queue-sizes = <64 64>;
+ big-endian;
+ fsl,dma-queues = <2>;
+ };
+
--
2.34.1
Powered by blists - more mailing lists