linux-kernel - [PATCH] usb: ucsi: stm32: fix command completion handling

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240521151109.3078775-1-fabrice.gasnier@foss.st.com>
Date: Tue, 21 May 2024 17:11:09 +0200
From: Fabrice Gasnier <fabrice.gasnier@...s.st.com>
To: <heikki.krogerus@...ux.intel.com>, <gregkh@...uxfoundation.org>
CC: <linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        <fabrice.gasnier@...s.st.com>
Subject: [PATCH] usb: ucsi: stm32: fix command completion handling

Sometimes errors are seen, when doing DR swap, like:
[   24.672481] ucsi-stm32g0-i2c 0-0035: UCSI_GET_PDOS failed (-5)
[   24.720188] ucsi-stm32g0-i2c 0-0035: ucsi_handle_connector_change:
 GET_CONNECTOR_STATUS failed (-5)

There may be some race, which lead to read CCI, before the command complete
flag is set, hence returning -EIO. Similar fix has been done also in
ucsi_acpi [1].

In case of a spurious or otherwise delayed notification it is
possible that CCI still reports the previous completion. The
UCSI spec is aware of this and provides two completion bits in
CCI, one for normal commands and one for acks. As acks and commands
alternate the notification handler can determine if the completion
bit is from the current command.

To fix this add the ACK_PENDING bit for ucsi_stm32g0 and only complete
commands if the completion bit matches.

[1] https://lore.kernel.org/lkml/20240121204123.275441-3-lk@c--e.de/

Fixes: 72849d4fcee7 ("usb: typec: ucsi: stm32g0: add support for stm32g0 controller")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@...s.st.com>
---
 drivers/usb/typec/ucsi/ucsi_stm32g0.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/typec/ucsi/ucsi_stm32g0.c b/drivers/usb/typec/ucsi/ucsi_stm32g0.c
index 93d7806681cf..7d6576778dad 100644
--- a/drivers/usb/typec/ucsi/ucsi_stm32g0.c
+++ b/drivers/usb/typec/ucsi/ucsi_stm32g0.c
@@ -395,9 +395,13 @@ static int ucsi_stm32g0_sync_write(struct ucsi *ucsi, unsigned int offset, const
 				   size_t len)
 {
 	struct ucsi_stm32g0 *g0 = ucsi_get_drvdata(ucsi);
+	bool ack = UCSI_COMMAND(*(u64 *)val) == UCSI_ACK_CC_CI;
 	int ret;
 
-	set_bit(COMMAND_PENDING, &g0->flags);
+	if (ack)
+		set_bit(ACK_PENDING, &g0->flags);
+	else
+		set_bit(COMMAND_PENDING, &g0->flags);
 
 	ret = ucsi_stm32g0_async_write(ucsi, offset, val, len);
 	if (ret)
@@ -405,9 +409,14 @@ static int ucsi_stm32g0_sync_write(struct ucsi *ucsi, unsigned int offset, const
 
 	if (!wait_for_completion_timeout(&g0->complete, msecs_to_jiffies(5000)))
 		ret = -ETIMEDOUT;
+	else
+		return 0;
 
 out_clear_bit:
-	clear_bit(COMMAND_PENDING, &g0->flags);
+	if (ack)
+		clear_bit(ACK_PENDING, &g0->flags);
+	else
+		clear_bit(COMMAND_PENDING, &g0->flags);
 
 	return ret;
 }
@@ -428,8 +437,9 @@ static irqreturn_t ucsi_stm32g0_irq_handler(int irq, void *data)
 	if (UCSI_CCI_CONNECTOR(cci))
 		ucsi_connector_change(g0->ucsi, UCSI_CCI_CONNECTOR(cci));
 
-	if (test_bit(COMMAND_PENDING, &g0->flags) &&
-	    cci & (UCSI_CCI_ACK_COMPLETE | UCSI_CCI_COMMAND_COMPLETE))
+	if (cci & UCSI_CCI_ACK_COMPLETE && test_and_clear_bit(ACK_PENDING, &g0->flags))
+		complete(&g0->complete);
+	if (cci & UCSI_CCI_COMMAND_COMPLETE && test_and_clear_bit(COMMAND_PENDING, &g0->flags))
 		complete(&g0->complete);
 
 	return IRQ_HANDLED;
-- 
2.25.1