| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240523080330.1860074-24-Delphine_CC_Chiu@wiwynn.com>
Date: Thu, 23 May 2024 16:03:28 +0800
From: Delphine CC Chiu <Delphine_CC_Chiu@...ynn.com>
To: patrick@...cx.xyz,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Joel Stanley <joel@....id.au>,
Andrew Jeffery <andrew@...econstruct.com.au>
Cc: Delphine CC Chiu <Delphine_CC_Chiu@...ynn.com>,
devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-aspeed@...ts.ozlabs.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v8 23/23] ARM: dts: aspeed: yosemite4: add fan led config
Set fan led config in yosemite4 DTS.
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@...ynn.com>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 152 +++++++++++++++++-
1 file changed, 150 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 21ca22281ef8..fc988e32519c 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -75,6 +75,154 @@ tpmdev@0 {
reg = <0>;
};
};
+
+ leds {
+ compatible = "gpio-leds";
+
+ fan0_blue {
+ retain-state-shutdown;
+ default-state = "on";
+ gpios = <&led_gpio0 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan0_amber {
+ retain-state-shutdown;
+ default-state = "off";
+ gpios = <&led_gpio0 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan1_blue {
+ retain-state-shutdown;
+ default-state = "on";
+ gpios = <&led_gpio0 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan1_amber {
+ retain-state-shutdown;
+ default-state = "off";
+ gpios = <&led_gpio0 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan2_blue {
+ retain-state-shutdown;
+ default-state = "on";
+ gpios = <&led_gpio1 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan2_amber {
+ retain-state-shutdown;
+ default-state = "off";
+ gpios = <&led_gpio1 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan3_blue {
+ retain-state-shutdown;
+ default-state = "on";
+ gpios = <&led_gpio1 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan3_amber {
+ retain-state-shutdown;
+ default-state = "off";
+ gpios = <&led_gpio1 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan4_blue {
+ retain-state-shutdown;
+ default-state = "on";
+ gpios = <&led_gpio0 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan4_amber {
+ retain-state-shutdown;
+ default-state = "off";
+ gpios = <&led_gpio0 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan5_blue {
+ retain-state-shutdown;
+ default-state = "on";
+ gpios = <&led_gpio0 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan5_amber {
+ retain-state-shutdown;
+ default-state = "off";
+ gpios = <&led_gpio0 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan6_blue {
+ retain-state-shutdown;
+ default-state = "on";
+ gpios = <&led_gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan6_amber {
+ retain-state-shutdown;
+ default-state = "off";
+ gpios = <&led_gpio1 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan7_blue {
+ retain-state-shutdown;
+ default-state = "on";
+ gpios = <&led_gpio1 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan7_amber {
+ retain-state-shutdown;
+ default-state = "off";
+ gpios = <&led_gpio1 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan8_blue {
+ retain-state-shutdown;
+ default-state = "on";
+ gpios = <&led_gpio0 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan8_amber {
+ retain-state-shutdown;
+ default-state = "off";
+ gpios = <&led_gpio0 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan9_blue {
+ retain-state-shutdown;
+ default-state = "on";
+ gpios = <&led_gpio0 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan9_amber {
+ retain-state-shutdown;
+ default-state = "off";
+ gpios = <&led_gpio0 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan10_blue {
+ retain-state-shutdown;
+ default-state = "on";
+ gpios = <&led_gpio1 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan10_amber {
+ retain-state-shutdown;
+ default-state = "off";
+ gpios = <&led_gpio1 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan11_blue {
+ retain-state-shutdown;
+ default-state = "on";
+ gpios = <&led_gpio1 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ fan11_amber {
+ retain-state-shutdown;
+ default-state = "off";
+ gpios = <&led_gpio1 7 GPIO_ACTIVE_HIGH>;
+ };
+ };
};
&uart1 {
@@ -1198,7 +1346,7 @@ eeprom@52 {
reg = <0x52>;
};
- gpio@61 {
+ led_gpio1: gpio@61 {
compatible = "nxp,pca9552";
reg = <0x61>;
#address-cells = <1>;
@@ -1268,7 +1416,7 @@ eeprom@52 {
reg = <0x52>;
};
- gpio@61 {
+ led_gpio0: gpio@61 {
compatible = "nxp,pca9552";
reg = <0x61>;
#address-cells = <1>;
--
2.25.1
Powered by blists - more mailing lists