linux-kernel - [PATCH v3 2/7] arm64: dts: ti: k3-j722s-main: Redefine USB1 node description

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240524090514.152727-3-s-vadapalli@ti.com>
Date: Fri, 24 May 2024 14:35:09 +0530
From: Siddharth Vadapalli <s-vadapalli@...com>
To: <nm@...com>, <vigneshr@...com>, <afd@...com>, <kristo@...nel.org>,
        <robh@...nel.org>, <krzk+dt@...nel.org>, <conor+dt@...nel.org>,
        <rogerq@...nel.org>
CC: <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>, <u-kumar1@...com>,
        <danishanwar@...com>, <srk@...com>, <s-vadapalli@...com>
Subject: [PATCH v3 2/7] arm64: dts: ti: k3-j722s-main: Redefine USB1 node description

From: Ravi Gunasekaran <r-gunasekaran@...com>

USB1 controller on J722S and AM62P are from different vendors.
Redefine the USB1 node description for J722S by deleting the
node inherited from AM62P dtsi.

Signed-off-by: Ravi Gunasekaran <r-gunasekaran@...com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@...com>
---
v2:
https://lore.kernel.org/r/20240513114443.16350-3-r-gunasekaran@ti.com/
No changes since v2.

v1:
https://lore.kernel.org/r/20240429120932.11456-3-r-gunasekaran@ti.com/
Changes since v1:
- The entire node which was added in k3-j722s.dtsi in v1 in now moved to
  k3-j722s-main.dtsi as USB is a main domain peripheral.
- Used generic node names - renamed "cdns-usb@...0000" to "usb@...0000".

 arch/arm64/boot/dts/ti/k3-j722s-main.dtsi | 39 +++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
index 0dac8f1e1291..b069cecebfd9 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
@@ -6,6 +6,13 @@
 
 #include <dt-bindings/phy/phy-ti.h>
 
+/*
+ * USB1 controller on AM62P and J722S are of different IP.
+ * Delete AM62P's USBSS1 node definition and redefine it for J722S.
+ */
+
+/delete-node/ &usbss1;
+
 / {
 	serdes_refclk: clk-0 {
 		compatible = "fixed-clock";
@@ -52,6 +59,38 @@ serdes0: serdes@...0000 {
 			status = "disabled"; /* Needs lane config */
 		};
 	};
+
+	usbss1: usb@...0000 {
+		compatible = "ti,j721e-usb";
+		reg = <0x00 0x0f920000 0x00 0x100>;
+		power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 278 3>, <&k3_clks 278 1>;
+		clock-names = "ref", "lpm";
+		assigned-clocks = <&k3_clks 278 3>; /* USB2_REFCLK */
+		assigned-clock-parents = <&k3_clks 278 4>; /* HF0SC0 */
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		usb1: usb@...00000{
+			compatible = "cdns,usb3";
+			reg = <0x00 0x31200000 0x00 0x10000>,
+			      <0x00 0x31210000 0x00 0x10000>,
+			      <0x00 0x31220000 0x00 0x10000>;
+			reg-names = "otg",
+				    "xhci",
+				    "dev";
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+				     <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; /* otgirq */
+			interrupt-names = "host",
+					  "peripheral",
+					  "otg";
+			maximum-speed = "super-speed";
+			dr_mode = "otg";
+		};
+	};
 };
 
 &main_conf {
-- 
2.40.1