| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240524090514.152727-4-s-vadapalli@ti.com>
Date: Fri, 24 May 2024 14:35:10 +0530
From: Siddharth Vadapalli <s-vadapalli@...com>
To: <nm@...com>, <vigneshr@...com>, <afd@...com>, <kristo@...nel.org>,
<robh@...nel.org>, <krzk+dt@...nel.org>, <conor+dt@...nel.org>,
<rogerq@...nel.org>
CC: <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <u-kumar1@...com>,
<danishanwar@...com>, <srk@...com>, <s-vadapalli@...com>
Subject: [PATCH v3 3/7] arm64: dts: ti: k3-j722s-evm: Update USB0 and USB1
From: Ravi Gunasekaran <r-gunasekaran@...com>
The GPIO expander on the EVM allows the USB selection for Type-C
port to either USB0 or USB1 via USB hub. By default, let the Type-C
port select USB0 via the GPIO expander port P05.
Enable super-speed on USB1 by updating SerDes0 lane configuration.
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@...com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@...com>
---
v2:
https://lore.kernel.org/r/20240513114443.16350-4-r-gunasekaran@ti.com/
Changes since v2:
- Renamed serdes0_ln_ctrl to serdes_ln_ctrl corresponding to the change
made in patch 1.
- Dropped Serdes1 idle-states since it has not yet been added in the
serdes_ln_ctrl node.
- Dropped Serdes1 specific Lane-Muxing macros in "k3-serdes.h".
- Added newline after /* J722S */ in "k3-serdes.h" following the file
convention.
v1:
https://lore.kernel.org/r/20240429120932.11456-4-r-gunasekaran@ti.com/
Changes since v1:
- Removed USB aliases, line-name property for p05 GPIO hog.
- Included k3-j722s-main.dtsi.
arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 54 +++++++++++++++++++++++++
arch/arm64/boot/dts/ti/k3-j722s.dtsi | 5 +++
arch/arm64/boot/dts/ti/k3-serdes.h | 5 +++
3 files changed, 64 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
index bf3c246d13d1..a3bda39cc223 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
@@ -9,7 +9,9 @@
/dts-v1/;
#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy.h>
#include "k3-j722s.dtsi"
+#include "k3-serdes.h"
/ {
compatible = "ti,j722s-evm", "ti,j722s";
@@ -202,6 +204,12 @@ J722S_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AG26) RGMII1_TXC */
J722S_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AF25) RGMII1_TX_CTL */
>;
};
+
+ main_usb1_pins_default: main-usb1-default-pins {
+ pinctrl-single,pins = <
+ J722S_IOPAD(0x0258, PIN_INPUT, 0) /* (B27) USB1_DRVVBUS */
+ >;
+ };
};
&cpsw3g {
@@ -301,6 +309,13 @@ exp1: gpio@23 {
"PCIe0_1L_RC_RSTz", "PCIe0_1L_PRSNT#",
"ENET1_EXP_SPARE2", "ENET1_EXP_PWRDN",
"PD_I2ENET1_I2CMUX_SELC_IRQ", "ENET1_EXP_RESETZ";
+
+ p05-hog {
+ /* P05 - USB2.0_MUX_SEL */
+ gpio-hog;
+ gpios = <5 GPIO_ACTIVE_LOW>;
+ output-high;
+ };
};
};
@@ -384,3 +399,42 @@ &sdhci1 {
status = "okay";
bootph-all;
};
+
+&serdes_ln_ctrl {
+ idle-states = <J722S_SERDES0_LANE0_USB>;
+};
+
+&serdes0 {
+ status = "okay";
+ serdes0_usb_link: phy@0 {
+ reg = <0>;
+ cdns,num-lanes = <1>;
+ #phy-cells = <0>;
+ cdns,phy-type = <PHY_TYPE_USB3>;
+ resets = <&serdes_wiz0 1>;
+ };
+};
+
+&usbss0 {
+ ti,vbus-divider;
+ status = "okay";
+};
+
+&usb0 {
+ dr_mode = "otg";
+ usb-role-switch;
+};
+
+&usbss1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_usb1_pins_default>;
+ ti,vbus-divider;
+ status = "okay";
+};
+
+&usb1 {
+ dr_mode = "host";
+ maximum-speed = "super-speed";
+ phys = <&serdes0_usb_link>;
+ phy-names = "cdns3,usb3-phy";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j722s.dtsi b/arch/arm64/boot/dts/ti/k3-j722s.dtsi
index c75744edb143..61b64fae1bf4 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j722s.dtsi
@@ -87,3 +87,8 @@ &oc_sram {
reg = <0x00 0x70000000 0x00 0x40000>;
ranges = <0x00 0x00 0x70000000 0x40000>;
};
+
+/* Include bus peripherals that are additionally
+ * present in J722S
+ */
+ #include "k3-j722s-main.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-serdes.h b/arch/arm64/boot/dts/ti/k3-serdes.h
index a011ad893b44..e6a036a4e70b 100644
--- a/arch/arm64/boot/dts/ti/k3-serdes.h
+++ b/arch/arm64/boot/dts/ti/k3-serdes.h
@@ -201,4 +201,9 @@
#define J784S4_SERDES4_LANE3_USB 0x2
#define J784S4_SERDES4_LANE3_IP4_UNUSED 0x3
+/* J722S */
+
+#define J722S_SERDES0_LANE0_USB 0x0
+#define J722S_SERDES0_LANE0_QSGMII_LANE2 0x1
+
#endif /* DTS_ARM64_TI_K3_SERDES_H */
--
2.40.1
Powered by blists - more mailing lists