[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240524094603.988-1-paul.barker.ct@bp.renesas.com>
Date: Fri, 24 May 2024 10:45:54 +0100
From: Paul Barker <paul.barker.ct@...renesas.com>
To: Geert Uytterhoeven <geert+renesas@...der.be>,
Magnus Damm <magnus.damm@...il.com>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>
Cc: Paul Barker <paul.barker.ct@...renesas.com>,
linux-renesas-soc@...r.kernel.org,
devicetree@...r.kernel.org,
linux-gpio@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 0/9] Configure GbEth for RGMII on RZ/G2L family
For devices in the RZ/G2L family, we have so far relied on U-Boot correctly
configuring the Ethernet interfaces in RGMII mode with PVDD=1.8V before the
kernel is booted. Instead, the required configuration should be described in the
device tree and activated within the pinctrl driver.
Paul Barker (9):
pinctrl: renesas: rzg2l: Fix variable names in OEN functions
pinctrl: renesas: rzg2l: Refactor pin to OEN bit translation
pinctrl: renesas: rzg2l: Support output enable on RZ/G2L
arm64: dts: renesas: rzg2l: Enable Ethernet TXC output
arm64: dts: renesas: rzg2lc: Enable Ethernet TXC output
arm64: dts: renesas: rzg2ul: Enable Ethernet TXC output
arm64: dts: renesas: rzg2l: Set Ethernet PVDD to 1.8V
arm64: dts: renesas: rzg2lc: Set Ethernet PVDD to 1.8V
arm64: dts: renesas: rzg2ul: Set Ethernet PVDD to 1.8V
.../boot/dts/renesas/rzg2l-smarc-som.dtsi | 86 ++++++++++++-------
.../boot/dts/renesas/rzg2lc-smarc-som.dtsi | 43 ++++++----
.../boot/dts/renesas/rzg2ul-smarc-som.dtsi | 86 ++++++++++++-------
drivers/pinctrl/renesas/pinctrl-rzg2l.c | 78 ++++++++++-------
4 files changed, 182 insertions(+), 111 deletions(-)
--
2.39.2
Powered by blists - more mailing lists