| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID:
<AM9PR04MB8604C000F464CF1F5788901995F52@AM9PR04MB8604.eurprd04.prod.outlook.com>
Date: Fri, 24 May 2024 12:03:35 +0000
From: Pankaj Gupta <pankaj.gupta@....com>
To: Sascha Hauer <s.hauer@...gutronix.de>
CC: Jonathan Corbet <corbet@....net>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Conor Dooley
<conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>, Pengutronix Kernel
Team <kernel@...gutronix.de>, Fabio Estevam <festevam@...il.com>, Rob Herring
<robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
"linux-doc@...r.kernel.org" <linux-doc@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"imx@...ts.linux.dev" <imx@...ts.linux.dev>,
"linux-arm-kernel@...ts.infradead.org" <linux-arm-kernel@...ts.infradead.org>
Subject: RE: [EXT] Re: [PATCH v2 5/5] firmware: imx: adds miscdev
> -----Original Message-----
> From: Sascha Hauer <s.hauer@...gutronix.de>
> Sent: Friday, May 24, 2024 1:53 PM
> To: Pankaj Gupta <pankaj.gupta@....com>
> Cc: Jonathan Corbet <corbet@....net>; Rob Herring <robh+dt@...nel.org>;
> Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>; Conor Dooley
> <conor+dt@...nel.org>; Shawn Guo <shawnguo@...nel.org>; Pengutronix
> Kernel Team <kernel@...gutronix.de>; Fabio Estevam
> <festevam@...il.com>; Rob Herring <robh@...nel.org>; Krzysztof Kozlowski
> <krzk+dt@...nel.org>; linux-doc@...r.kernel.org; linux-
> kernel@...r.kernel.org; devicetree@...r.kernel.org; imx@...ts.linux.dev;
> linux-arm-kernel@...ts.infradead.org
> Subject: [EXT] Re: [PATCH v2 5/5] firmware: imx: adds miscdev
>
> Caution: This is an external email. Please take care when clicking links or
> opening attachments. When in doubt, report the message using the 'Report
> this email' button
>
>
> On Thu, May 23, 2024 at 04:19:36PM +0530, Pankaj Gupta wrote:
> > +int imx_ele_miscdev_msg_send(struct se_if_device_ctx *dev_ctx,
> > + void *tx_msg, int tx_msg_sz) {
> > + struct se_if_priv *priv = dev_ctx->priv;
> > + struct se_msg_hdr *header;
> > + int err;
> > +
> > + header = (struct se_msg_hdr *) tx_msg;
> > +
> > + /*
> > + * Check that the size passed as argument matches the size
> > + * carried in the message.
> > + */
> > + err = header->size << 2;
> > +
> > + if (err != tx_msg_sz) {
> > + err = -EINVAL;
> > + dev_err(priv->dev,
> > + "%s: User buffer too small\n",
> > + dev_ctx->miscdev.name);
> > + goto exit;
> > + }
> > + /* Check the message is valid according to tags */
> > + if (header->tag == priv->cmd_tag) {
> > + mutex_lock(&priv->se_if_cmd_lock);
>
> Grabbing a mutex in a character devices write fop and releasing it in the read
> fop is really calling for undesired race conditions.
Condition is:
- Only one command is allowed to be in flight, at a time per interface.
-- Second command is not allowed, when one command is in flight.
- Duration of the flight is till the time the response is not received from the FW.
Command lock is grabbed and then released in process context only.
>
> If sending a command and receiving the response shall be an atomic operation
> then you should really consider turning this into an ioctl and just not
> implement read/write on the character device. With this you'll be able to get
> rid of several oddities in this drivers locking.
>
It is not an atomic operation. It can be pre-empted.
But it cannot be pre-empted to send another command on the same interface.
As only one command is allowed to be executed at one point in time, through an interface.
> > + priv->waiting_rsp_dev = dev_ctx;
> > + } else if (header->tag == priv->rsp_tag) {
> > + /* Check the device context can send the command */
> > + if (dev_ctx != priv->cmd_receiver_dev) {
> > + dev_err(priv->dev,
> > + "%s: Channel not configured to send resp to FW.",
> > + dev_ctx->miscdev.name);
> > + err = -EPERM;
> > + goto exit;
> > + }
> > + } else {
> > + dev_err(priv->dev,
> > + "%s: The message does not have a valid TAG\n",
> > + dev_ctx->miscdev.name);
> > + err = -EINVAL;
> > + goto exit;
> > + }
> > + err = imx_ele_msg_send(priv, tx_msg);
> > + if (err < 0) {
> > + if (header->tag == priv->cmd_tag) {
> > + priv->waiting_rsp_dev = NULL;
> > + mutex_unlock(&dev_ctx->priv->se_if_cmd_lock);
> > + }
> > + } else
> > + err = header->size << 2;
> > +exit:
> > + return err;
> > +}
> > +
>
> [...]
>
> > +static ssize_t se_if_fops_write(struct file *fp, const char __user *buf,
> > + size_t size, loff_t *ppos) {
> > + struct se_api_msg *tx_msg __free(kfree);
Accepted. Will correct in V3.
Initialize tx_msg with NULL.
> > + struct se_if_device_ctx *dev_ctx;
> > + struct se_if_priv *priv;
> > + int err;
> > +
> > + dev_ctx = container_of(fp->private_data,
> > + struct se_if_device_ctx,
> > + miscdev);
> > + priv = dev_ctx->priv;
> > + dev_dbg(priv->dev,
> > + "%s: write from buf (%p)%zu, ppos=%lld\n",
> > + dev_ctx->miscdev.name,
> > + buf, size, ((ppos) ? *ppos : 0));
> > +
> > + if (down_interruptible(&dev_ctx->fops_lock))
> > + return -EBUSY;
> > +
> > + if (dev_ctx->status != SE_IF_CTX_OPENED) {
> > + err = -EINVAL;
> > + goto exit;
> > + }
> > +
> > + if (size < SE_MU_HDR_SZ) {
> > + dev_err(priv->dev,
> > + "%s: User buffer too small(%zu < %d)\n",
> > + dev_ctx->miscdev.name,
> > + size, SE_MU_HDR_SZ);
> > + err = -ENOSPC;
> > + goto exit;
> > + }
> > + tx_msg = memdup_user(buf, size);
> > + if (!tx_msg) {
> > + err = -ENOMEM;
> > + goto exit;
> > + }
>
> memdup_user() returns an error pointer, not NULL. Also you are using tx_msg
> uninitialized.
>
Accepted. Will correct in V3.
> > +
> > + print_hex_dump_debug("from user ", DUMP_PREFIX_OFFSET, 4, 4,
> > + tx_msg, size, false);
> > +
> > + err = imx_ele_miscdev_msg_send(dev_ctx, tx_msg, size);
> > +
> > +exit:
> > + up(&dev_ctx->fops_lock);
> > + return err;
> > +}
> > +
> > +/*
> > + * Read a message from the MU.
> > + * Blocking until a message is available.
> > + */
> > +static ssize_t se_if_fops_read(struct file *fp, char __user *buf,
> > + size_t size, loff_t *ppos) {
> > + struct se_if_device_ctx *dev_ctx;
> > + struct se_buf_desc *b_desc;
> > + struct se_if_priv *priv;
> > + u32 size_to_copy;
> > + int err;
> > +
> > + dev_ctx = container_of(fp->private_data,
> > + struct se_if_device_ctx,
> > + miscdev);
> > + priv = dev_ctx->priv;
> > + dev_dbg(priv->dev,
> > + "%s: read to buf %p(%zu), ppos=%lld\n",
> > + dev_ctx->miscdev.name,
> > + buf, size, ((ppos) ? *ppos : 0));
> > +
> > + if (down_interruptible(&dev_ctx->fops_lock))
> > + return -EBUSY;
> > +
> > + if (dev_ctx->status != SE_IF_CTX_OPENED) {
> > + err = -EINVAL;
> > + goto exit;
> > + }
> > +
> > + err = imx_ele_miscdev_msg_rcv(dev_ctx);
> > + if (err)
> > + goto exit;
> > +
> > + /* Buffer containing the message from FW, is
> > + * allocated in callback function.
> > + * Check if buffer allocation failed.
> > + */
> > + if (!dev_ctx->temp_resp) {
> > + err = -ENOMEM;
> > + goto exit;
> > + }
> > +
> > + dev_dbg(priv->dev,
> > + "%s: %s %s\n",
> > + dev_ctx->miscdev.name,
> > + __func__,
> > + "message received, start transmit to user");
> > +
> > + /*
> > + * Check that the size passed as argument is larger than
> > + * the one carried in the message.
> > + */
> > + size_to_copy = dev_ctx->temp_resp_size << 2;
> > + if (size_to_copy > size) {
> > + dev_dbg(priv->dev,
> > + "%s: User buffer too small (%zu < %d)\n",
> > + dev_ctx->miscdev.name,
> > + size, size_to_copy);
> > + size_to_copy = size;
> > + }
> > +
> > + /*
> > + * We may need to copy the output data to user before
> > + * delivering the completion message.
> > + */
> > + while (!list_empty(&dev_ctx->pending_out)) {
> > + b_desc = list_first_entry_or_null(&dev_ctx->pending_out,
> > + struct se_buf_desc,
> > + link);
> > + if (!b_desc)
> > + continue;
>
> b_desc will never be NULL because otherwise you wouldn't be in the loop
> anymore. The usual way to iterate over a list is to use list_for_each_entry() or
> list_for_each_entry_safe() in case you delete entries in the loop body.
>
Will remove the NULL check.
if (!b_desc)
continue;
> > +
> > + if (b_desc->usr_buf_ptr && b_desc->shared_buf_ptr) {
> > +
> > + dev_dbg(priv->dev,
> > + "%s: Copy output data to user\n",
> > + dev_ctx->miscdev.name);
> > + if (copy_to_user(b_desc->usr_buf_ptr,
> > + b_desc->shared_buf_ptr,
> > + b_desc->size)) {
> > + dev_err(priv->dev,
> > + "%s: Failure copying output data to user.",
> > + dev_ctx->miscdev.name);
> > + err = -EFAULT;
> > + goto exit;
> > + }
> > + }
> > +
> > + if (b_desc->shared_buf_ptr)
> > + memset(b_desc->shared_buf_ptr, 0, b_desc->size);
> > +
> > + __list_del_entry(&b_desc->link);
>
> list_del()
>
> > + kfree(b_desc);
> > + }
> > +
> > + /* Copy data from the buffer */
> > + print_hex_dump_debug("to user ", DUMP_PREFIX_OFFSET, 4, 4,
> > + dev_ctx->temp_resp, size_to_copy, false);
> > + if (copy_to_user(buf, dev_ctx->temp_resp, size_to_copy)) {
> > + dev_err(priv->dev,
> > + "%s: Failed to copy to user\n",
> > + dev_ctx->miscdev.name);
> > + err = -EFAULT;
> > + goto exit;
> > + }
> > +
> > + err = size_to_copy;
> > + kfree(dev_ctx->temp_resp);
> > +
> > + /* free memory allocated on the shared buffers. */
> > + dev_ctx->secure_mem.pos = 0;
> > + dev_ctx->non_secure_mem.pos = 0;
> > +
> > + dev_ctx->pending_hdr = 0;
> > +
> > +exit:
> > + /*
> > + * Clean the used Shared Memory space,
> > + * whether its Input Data copied from user buffers, or
> > + * Data received from FW.
> > + */
> > + while (!list_empty(&dev_ctx->pending_in) ||
> > + !list_empty(&dev_ctx->pending_out)) {
> > + if (!list_empty(&dev_ctx->pending_in))
> > + b_desc = list_first_entry_or_null(&dev_ctx->pending_in,
> > + struct se_buf_desc,
> > + link);
> > + else
> > + b_desc = list_first_entry_or_null(&dev_ctx->pending_out,
> > + struct se_buf_desc,
> > + link);
> > +
> > + if (!b_desc)
> > + continue;
> > +
> > + if (b_desc->shared_buf_ptr)
> > + memset(b_desc->shared_buf_ptr, 0, b_desc->size);
> > +
> > + __list_del_entry(&b_desc->link);
> > + kfree(b_desc);
> > + }
> > +
> > + up(&dev_ctx->fops_lock);
> > + return err;
> > +}
> > +
> > +static int se_ioctl_get_mu_info(struct se_if_device_ctx *dev_ctx,
> > + u64 arg) {
> > + struct se_if_priv *priv = dev_get_drvdata(dev_ctx->dev);
> > + struct imx_se_node_info *if_node_info;
> > + struct se_ioctl_get_if_info info;
> > + int err = 0;
> > +
> > + if_node_info = (struct imx_se_node_info *)priv->info;
>
> priv->info is of type const void *. You are casting away the the 'const'
> here. Either it is const, then it should stay const, or not, in which case it
> shouldn't be declared const. Also why isn't priv->info of type struct
> imx_se_node_info * in the first place?
This struct definition is local to the file se_ctrl.c.
Declaration of imx_se_node_info, is fixed by adding const in the whole file.
>
> > +
> > + info.se_if_id = if_node_info->se_if_id;
> > + info.interrupt_idx = 0;
> > + info.tz = 0;
> > + info.did = if_node_info->se_if_did;
> > + info.cmd_tag = if_node_info->cmd_tag;
> > + info.rsp_tag = if_node_info->rsp_tag;
> > + info.success_tag = if_node_info->success_tag;
> > + info.base_api_ver = if_node_info->base_api_ver;
> > + info.fw_api_ver = if_node_info->fw_api_ver;
> > +
> > + dev_dbg(priv->dev,
> > + "%s: info [se_if_id: %d, irq_idx: %d, tz: 0x%x, did: 0x%x]\n",
> > + dev_ctx->miscdev.name,
> > + info.se_if_id, info.interrupt_idx, info.tz,
> > + info.did);
> > +
> > + if (copy_to_user((u8 *)arg, &info, sizeof(info))) {
> > + dev_err(dev_ctx->priv->dev,
> > + "%s: Failed to copy mu info to user\n",
> > + dev_ctx->miscdev.name);
>
> Just drop these error messages for failed copy_to_user(). They don't give any
> valuable information and just bloat the code.
Accepted. Will correct in v3.
>
> > + err = -EFAULT;
> > + goto exit;
> > + }
> > +
> > +exit:
> > + return err;
> > +}
> > +
> > +/*
> > + * Copy a buffer of data to/from the user and return the address to
> > +use in
> > + * messages
> > + */
> > +static int se_ioctl_setup_iobuf_handler(struct se_if_device_ctx *dev_ctx,
> > + u64 arg) {
> > + struct se_shared_mem *shared_mem = NULL;
> > + struct se_ioctl_setup_iobuf io = {0};
> > + struct se_buf_desc *b_desc = NULL;
> > + int err = 0;
> > + u32 pos;
> > +
> > + if (copy_from_user(&io, (u8 *)arg, sizeof(io))) {
> > + dev_err(dev_ctx->priv->dev,
> > + "%s: Failed copy iobuf config from user\n",
> > + dev_ctx->miscdev.name);
> > + err = -EFAULT;
> > + goto exit;
> > + }
> > +
> > + dev_dbg(dev_ctx->priv->dev,
> > + "%s: io [buf: %p(%d) flag: %x]\n",
> > + dev_ctx->miscdev.name,
> > + io.user_buf, io.length, io.flags);
> > +
> > + if (io.length == 0 || !io.user_buf) {
> > + /*
> > + * Accept NULL pointers since some buffers are optional
> > + * in FW commands. In this case we should return 0 as
> > + * pointer to be embedded into the message.
> > + * Skip all data copy part of code below.
> > + */
> > + io.ele_addr = 0;
> > + goto copy;
> > + }
> > +
> > + /* Select the shared memory to be used for this buffer. */
> > + if (io.flags & SE_MU_IO_FLAGS_USE_SEC_MEM) {
>
> If you don't support this flag (yet), just don't include it in your submission.
Accepted. Will remove it in V3.
>
> > + /* App requires to use secure memory for this buffer.*/
> > + dev_err(dev_ctx->priv->dev,
> > + "%s: Failed allocate SEC MEM memory\n",
> > + dev_ctx->miscdev.name);
> > + err = -EFAULT;
> > + goto exit;
> > + } else {
> > + /* No specific requirement for this buffer. */
> > + shared_mem = &dev_ctx->non_secure_mem;
> > + }
> > +
> > + /* Check there is enough space in the shared memory. */
> > + if (shared_mem->size < shared_mem->pos
> > + || io.length >= shared_mem->size - shared_mem->pos) {
> > + dev_err(dev_ctx->priv->dev,
> > + "%s: Not enough space in shared memory\n",
> > + dev_ctx->miscdev.name);
> > + err = -ENOMEM;
> > + goto exit;
> > + }
> > +
> > + /* Allocate space in shared memory. 8 bytes aligned. */
> > + pos = shared_mem->pos;
> > + shared_mem->pos += round_up(io.length, 8u);
>
> You are checking if there's enough space in the shared memory without taking
> this round_up into account.
Yes. It is initializing the local variable 'pos', with last store value of shared_mem->pos.
>
> > + io.ele_addr = (u64)shared_mem->dma_addr + pos;
> > +
> > + if ((io.flags & SE_MU_IO_FLAGS_USE_SEC_MEM) &&
> > + !(io.flags & SE_MU_IO_FLAGS_USE_SHORT_ADDR)) {
> > + /*Add base address to get full address.*/
> > + dev_err(dev_ctx->priv->dev,
> > + "%s: Failed allocate SEC MEM memory\n",
> > + dev_ctx->miscdev.name);
> > + err = -EFAULT;
> > + goto exit;
> > + }
> > +
> > + memset(shared_mem->ptr + pos, 0, io.length);
> > + if ((io.flags & SE_IO_BUF_FLAGS_IS_INPUT) ||
> > + (io.flags & SE_IO_BUF_FLAGS_IS_IN_OUT)) {
> > + /*
> > + * buffer is input:
> > + * copy data from user space to this allocated buffer.
> > + */
> > + if (copy_from_user(shared_mem->ptr + pos, io.user_buf,
> > + io.length)) {
> > + dev_err(dev_ctx->priv->dev,
> > + "%s: Failed copy data to shared memory\n",
> > + dev_ctx->miscdev.name);
> > + err = -EFAULT;
> > + goto exit;
> > + }
> > + }
> > +
> > + b_desc = kzalloc(sizeof(*b_desc), GFP_KERNEL);
> > + if (!b_desc) {
> > + err = -ENOMEM;
> > + goto exit;
> > + }
> > +
> > +copy:
> > + /* Provide the EdgeLock Enclave address to user space only if success.*/
> > + if (copy_to_user((u8 *)arg, &io, sizeof(io))) {
> > + dev_err(dev_ctx->priv->dev,
> > + "%s: Failed to copy iobuff setup to user\n",
> > + dev_ctx->miscdev.name);
> > + kfree(b_desc);
> > + err = -EFAULT;
> > + goto exit;
> > + }
> > +
> > + if (b_desc) {
> > + b_desc->shared_buf_ptr = shared_mem->ptr + pos;
> > + b_desc->usr_buf_ptr = io.user_buf;
> > + b_desc->size = io.length;
> > +
> > + if (io.flags & SE_IO_BUF_FLAGS_IS_INPUT) {
> > + /*
> > + * buffer is input:
> > + * add an entry in the "pending input buffers" list so
> > + * that copied data can be cleaned from shared memory
> > + * later.
> > + */
> > + list_add_tail(&b_desc->link, &dev_ctx->pending_in);
> > + } else {
> > + /*
> > + * buffer is output:
> > + * add an entry in the "pending out buffers" list so data
> > + * can be copied to user space when receiving Secure-Enclave
> > + * response.
> > + */
> > + list_add_tail(&b_desc->link, &dev_ctx->pending_out);
> > + }
> > + }
> > +
> > +exit:
> > + return err;
> > +}
> > +
> > +/* IOCTL to provide SoC information */ static int
> > +se_ioctl_get_se_soc_info_handler(struct se_if_device_ctx *dev_ctx,
> > + u64 arg) {
> > + struct imx_se_node_info_list *info_list;
> > + struct se_ioctl_get_soc_info soc_info;
> > + int err = -EINVAL;
> > +
> > + info_list = (struct imx_se_node_info_list *)
> > + device_get_match_data(dev_ctx->priv->dev);
>
> device_get_match_data() returns a const void *. It is generally not necessary
> to explicitly cast void * to another pointer type. By explicitly casting it you just
> cast away the 'const' without noticing.
Accepted. Will correct it v3.
>
> > + if (!info_list)
> > + goto exit;
> > +
> > + soc_info.soc_id = info_list->soc_id;
> > + soc_info.soc_rev = dev_ctx->priv->soc_rev;
> > +
> > + err = (int)copy_to_user((u8 *)arg, (u8 *)(&soc_info),
> > + sizeof(soc_info));
>
> First argument of copy_to_user() is a void *, then why do you cast it to
> something entirely unrelated (u8)? Second argument is a void * as well, so no
> need to explicitly cast.
Accepted, will correct in v3.
>
> > + if (err) {
> > + dev_err(dev_ctx->priv->dev,
> > + "%s: Failed to copy soc info to user\n",
> > + dev_ctx->miscdev.name);
> > + err = -EFAULT;
> > + goto exit;
>
> This goto is unnecessary.
Accepted will corrected in v3.
>
> > + }
> > +
> > +exit:
> > + return err;
> > +}
> > +
> > +/* Open a character device. */
> > +static int se_if_fops_open(struct inode *nd, struct file *fp) {
> > + struct se_if_device_ctx *dev_ctx = container_of(fp->private_data,
> > + struct se_if_device_ctx,
> > + miscdev);
> > + int err = 0;
> > +
> > + /* Avoid race if opened at the same time */
> > + if (down_trylock(&dev_ctx->fops_lock))
> > + return -EBUSY;
> > +
> > + /* Authorize only 1 instance. */
> > + if (dev_ctx->status != SE_IF_CTX_FREE) {
> > + err = -EBUSY;
> > + goto exit;
> > + }
> > +
> > + /*
> > + * Allocate some memory for data exchanges with S40x.
> > + * This will be used for data not requiring secure memory.
> > + */
> > + dev_ctx->non_secure_mem.ptr = dmam_alloc_coherent(dev_ctx->dev,
> > + MAX_DATA_SIZE_PER_USER,
> > + &dev_ctx->non_secure_mem.dma_addr,
> > + GFP_KERNEL);
>
> As Marc already mentioned: There is no point in using the managed version on
> dma_alloc_coherent() here.
Since it associated with device context and will remain associated till the device ctx is closed.
It was left to be part of managed version.
Accepted. Will correct it.
Will check other instances too.
>
> > + if (!dev_ctx->non_secure_mem.ptr) {
> > + err = -ENOMEM;
> > + goto exit;
> > + }
> > +
> > + dev_ctx->non_secure_mem.size = MAX_DATA_SIZE_PER_USER;
> > + dev_ctx->non_secure_mem.pos = 0;
> > + dev_ctx->status = SE_IF_CTX_OPENED;
> > +
> > + dev_ctx->pending_hdr = 0;
> > +
> > + goto exit;
> > +
> > + dmam_free_coherent(dev_ctx->priv->dev, MAX_DATA_SIZE_PER_USER,
> > + dev_ctx->non_secure_mem.ptr,
> > + dev_ctx->non_secure_mem.dma_addr);
>
> This code is unreachable.
Accepted. Will correct in v3.
>
> > +
> > +exit:
> > + up(&dev_ctx->fops_lock);
> > + return err;
> > +}
> > +
> > +/* Close a character device. */
> > +static int se_if_fops_close(struct inode *nd, struct file *fp) {
> > + struct se_if_device_ctx *dev_ctx = container_of(fp->private_data,
> > + struct se_if_device_ctx,
> > + miscdev);
> > + struct se_if_priv *priv = dev_ctx->priv;
> > + struct se_buf_desc *b_desc;
> > +
> > + /* Avoid race if closed at the same time */
> > + if (down_trylock(&dev_ctx->fops_lock))
> > + return -EBUSY;
> > +
> > + /* The device context has not been opened */
> > + if (dev_ctx->status != SE_IF_CTX_OPENED)
> > + goto exit;
> > +
> > + /* check if this device was registered as command receiver. */
> > + if (priv->cmd_receiver_dev == dev_ctx)
> > + priv->cmd_receiver_dev = NULL;
> > +
> > + /* check if this device was registered as waiting response. */
> > + if (priv->waiting_rsp_dev == dev_ctx) {
> > + priv->waiting_rsp_dev = NULL;
> > + mutex_unlock(&priv->se_if_cmd_lock);
> > + }
> > +
> > + /* Unmap secure memory shared buffer. */
> > + if (dev_ctx->secure_mem.ptr)
> > + devm_iounmap(dev_ctx->dev, dev_ctx->secure_mem.ptr);
>
> secure_mem is unused in this patch set. Drop this and re-add it later when
> you want to add support for this.
Accepted, will correct in v3.
>
> > +
> > + dev_ctx->secure_mem.ptr = NULL;
> > + dev_ctx->secure_mem.dma_addr = 0;
> > + dev_ctx->secure_mem.size = 0;
> > + dev_ctx->secure_mem.pos = 0;
> > +
> > + /* Free non-secure shared buffer. */
> > + dmam_free_coherent(dev_ctx->priv->dev, MAX_DATA_SIZE_PER_USER,
> > + dev_ctx->non_secure_mem.ptr,
> > + dev_ctx->non_secure_mem.dma_addr);
> > +
> > + dev_ctx->non_secure_mem.ptr = NULL;
> > + dev_ctx->non_secure_mem.dma_addr = 0;
> > + dev_ctx->non_secure_mem.size = 0;
> > + dev_ctx->non_secure_mem.pos = 0;
> > +
> > + while (!list_empty(&dev_ctx->pending_in) ||
> > + !list_empty(&dev_ctx->pending_out)) {
> > + if (!list_empty(&dev_ctx->pending_in))
> > + b_desc = list_first_entry_or_null(&dev_ctx->pending_in,
> > + struct se_buf_desc,
> > + link);
> > + else
> > + b_desc = list_first_entry_or_null(&dev_ctx->pending_out,
> > + struct se_buf_desc,
> > + link);
> > +
> > + if (!b_desc)
> > + continue;
> > +
> > + if (b_desc->shared_buf_ptr)
> > + memset(b_desc->shared_buf_ptr, 0, b_desc->size);
> > +
> > + __list_del_entry(&b_desc->link);
> > + kfree(b_desc);
> > + }
> > +
> > + dev_ctx->status = SE_IF_CTX_FREE;
> > +
> > +exit:
> > + up(&dev_ctx->fops_lock);
> > + return 0;
> > +}
> > +
> > +/* IOCTL entry point of a character device */ static long
> > +se_ioctl(struct file *fp, unsigned int cmd, unsigned long arg) {
> > + struct se_if_device_ctx *dev_ctx = container_of(fp->private_data,
> > + struct se_if_device_ctx,
> > + miscdev);
> > + struct se_if_priv *se_if_priv = dev_ctx->priv;
> > + int err = -EINVAL;
> > +
> > + /* Prevent race during change of device context */
> > + if (down_interruptible(&dev_ctx->fops_lock))
> > + return -EBUSY;
> > +
> > + switch (cmd) {
> > + case SE_IOCTL_ENABLE_CMD_RCV:
> > + if (!se_if_priv->cmd_receiver_dev) {
> > + se_if_priv->cmd_receiver_dev = dev_ctx;
> > + err = 0;
> > + }
> > + break;
> > + case SE_IOCTL_GET_MU_INFO:
> > + err = se_ioctl_get_mu_info(dev_ctx, arg);
> > + break;
> > + case SE_IOCTL_SETUP_IOBUF:
> > + err = se_ioctl_setup_iobuf_handler(dev_ctx, arg);
> > + break;
> > + case SE_IOCTL_GET_SOC_INFO:
> > + err = se_ioctl_get_se_soc_info_handler(dev_ctx, arg);
> > + break;
> > +
> > + default:
> > + err = -EINVAL;
> > + dev_dbg(se_if_priv->dev,
> > + "%s: IOCTL %.8x not supported\n",
> > + dev_ctx->miscdev.name,
> > + cmd);
> > + }
> > +
> > + up(&dev_ctx->fops_lock);
> > + return (long)err;
> > +}
> > +
> > +/* Char driver setup */
> > +static const struct file_operations se_if_fops = {
> > + .open = se_if_fops_open,
> > + .owner = THIS_MODULE,
> > + .release = se_if_fops_close,
> > + .unlocked_ioctl = se_ioctl,
> > + .read = se_if_fops_read,
> > + .write = se_if_fops_write,
> > +};
> > +
> > +/* interface for managed res to unregister a character device */
> > +static void if_misc_deregister(void *miscdevice) {
> > + misc_deregister(miscdevice);
> > +}
> > +
> > /* interface for managed res to free a mailbox channel */ static
> > void if_mbox_free_channel(void *mbox_chan) { @@ -270,6 +855,7 @@
> > static int se_probe_if_cleanup(struct platform_device *pdev)
> > struct device *dev = &pdev->dev;
> > struct se_if_priv *priv;
> > int ret = 0;
> > + int i;
> >
> > priv = dev_get_drvdata(dev);
> > if (!priv) {
> > @@ -294,6 +880,17 @@ static int se_probe_if_cleanup(struct
> platform_device *pdev)
> > priv->imem.buf = NULL;
> > }
> >
> > + if (priv->ctxs) {
> > + for (i = 0; i < priv->max_dev_ctx; i++) {
> > + if (priv->ctxs[i]) {
> > + devm_remove_action(dev,
> > + if_misc_deregister,
> > + &priv->ctxs[i]->miscdev);
> > + misc_deregister(&priv->ctxs[i]->miscdev);
> > + }
> > + }
> > + }
> > +
> > if (priv->flags & RESERVED_DMA_POOL) {
> > of_reserved_mem_device_release(dev);
> > priv->flags &= (~RESERVED_DMA_POOL); @@ -302,6 +899,84
> > @@ static int se_probe_if_cleanup(struct platform_device *pdev)
> > return ret;
> > }
> >
> > +static int init_device_context(struct device *dev) {
> > + const struct imx_se_node_info *info;
> > + struct se_if_device_ctx *dev_ctx;
> > + struct se_if_priv *priv;
> > + u8 *devname;
> > + int ret = 0;
> > + int i;
> > +
> > + priv = dev_get_drvdata(dev);
> > +
> > + if (!priv) {
> > + ret = -EINVAL;
> > + dev_err(dev, "Invalid SE-MU Priv data");
> > + return ret;
> > + }
>
> You won't hit this as you already have called dev_set_drvdata(). Just drop this
> check. Also you should pass a struct se_if_priv * directly to this function
> instead of taking the detour of passing a struct device *.
Ok. Accepted.
>
> > + info = priv->info;
> > +
> > + priv->ctxs = devm_kzalloc(dev, sizeof(dev_ctx) * priv->max_dev_ctx,
> > + GFP_KERNEL);
> > +
> > + if (!priv->ctxs) {
> > + ret = -ENOMEM;
> > + return ret;
> > + }
> > +
> > + /* Create users */
> > + for (i = 0; i < priv->max_dev_ctx; i++) {
> > + dev_ctx = devm_kzalloc(dev, sizeof(*dev_ctx), GFP_KERNEL);
> > + if (!dev_ctx) {
> > + ret = -ENOMEM;
> > + return ret;
> > + }
> > +
> > + dev_ctx->dev = dev;
> > + dev_ctx->status = SE_IF_CTX_FREE;
> > + dev_ctx->priv = priv;
> > +
> > + priv->ctxs[i] = dev_ctx;
> > +
> > + /* Default value invalid for an header. */
> > + init_waitqueue_head(&dev_ctx->wq);
> > +
> > + INIT_LIST_HEAD(&dev_ctx->pending_out);
> > + INIT_LIST_HEAD(&dev_ctx->pending_in);
> > + sema_init(&dev_ctx->fops_lock, 1);
> > +
> > + devname = devm_kasprintf(dev, GFP_KERNEL, "%s_ch%d",
> > + info->se_name, i);
> > + if (!devname) {
> > + ret = -ENOMEM;
> > + return ret;
> > + }
> > +
> > + dev_ctx->miscdev.name = devname;
> > + dev_ctx->miscdev.minor = MISC_DYNAMIC_MINOR;
> > + dev_ctx->miscdev.fops = &se_if_fops;
> > + dev_ctx->miscdev.parent = dev;
> > + ret = misc_register(&dev_ctx->miscdev);
> > + if (ret) {
> > + dev_err(dev, "failed to register misc device %d\n",
> > + ret);
> > + return ret;
> > + }
> > +
> > + ret = devm_add_action(dev, if_misc_deregister,
> > + &dev_ctx->miscdev);
> > + if (ret) {
> > + dev_err(dev,
> > + "failed[%d] to add action to the misc-dev\n",
> > + ret);
> > + return ret;
> > + }
> > + }
> > +
> > + return ret;
> > +}
> > +
> > static void se_load_firmware(const struct firmware *fw, void
> > *context) {
> > struct se_if_priv *priv = (struct se_if_priv *) context; @@
> > -461,6 +1136,16 @@ static int se_if_probe(struct platform_device *pdev)
> > }
> > }
> >
> > + if (info->max_dev_ctx) {
> > + ret = init_device_context(dev);
> > + if (ret) {
> > + dev_err(dev,
> > + "Failed[0x%x] to create device contexts.\n",
> > + ret);
> > + goto exit;
> > + }
> > + }
> > +
> > dev_info(dev, "i.MX secure-enclave: %s interface to firmware,
> configured.\n",
> > info->se_name);
> > return devm_of_platform_populate(dev); @@ -502,6 +1187,10 @@
> > static int se_resume(struct device *dev)
> > struct se_if_priv *priv = dev_get_drvdata(dev);
> > const struct imx_se_node_info *info
> > = priv->info;
> > + int i;
> > +
> > + for (i = 0; i < priv->max_dev_ctx; i++)
> > + wake_up_interruptible(&priv->ctxs[i]->wq);
> >
> > if (info && info->imem_mgmt)
> > se_restore_imem_state(dev);
>
> Sascha
>
> --
> Pengutronix e.K. | |
> Steuerwalder Str. 21 |
> http://www.pe/
> ngutronix.de%2F&data=05%7C02%7Cpankaj.gupta%40nxp.com%7C5351b96c
> b80a4eefa99d08dc7bcac8b3%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0
> %7C0%7C638521358079376269%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiM
> C4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7
> C%7C%7C&sdata=rI4tOYhDyFr7rHCBqFUJ%2FNBzVGf2mha4d20F2QM%2BN6
> Y%3D&reserved=0 |
> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Powered by blists - more mailing lists