| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 30 May 2024 17:05:49 +0200
From: Luca Weiss <luca.weiss@...rphone.com>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: ~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Luca Weiss <luca.weiss@...rphone.com>
Subject: [PATCH v3 3/3] arm64: dts: qcom: sm7225-fairphone-fp4: Enable USB
role switching
Configure the Type-C and VBUS regulator on PM7250B and wire it up to the
USB PHY, so that USB role and orientation switching works.
For now USB Power Delivery properties are skipped / disabled, so that
the (presumably) bootloader-configured charger doesn't get messed with
and we can charge the phone with at least some amount of power.
Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>
Signed-off-by: Luca Weiss <luca.weiss@...rphone.com>
---
.../dts/qcom/sm6350-sony-xperia-lena-pdx213.dts | 1 +
arch/arm64/boot/dts/qcom/sm6350.dtsi | 50 +++++++++++++++++++
arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 58 +++++++++++++++++++++-
3 files changed, 108 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
index dddd6e44d280..88ee04973a2f 100644
--- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -375,6 +375,7 @@ &usb_1 {
};
&usb_1_dwc3 {
+ /delete-property/ usb-role-switch;
maximum-speed = "super-speed";
dr_mode = "peripheral";
};
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index acf0b0f73af9..1ac626d963b8 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -1715,10 +1715,39 @@ usb_1_qmpphy: phy@...8000 {
<&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
reset-names = "phy", "common";
+ orientation-switch;
+
#clock-cells = <1>;
#phy-cells = <1>;
status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_1_qmpphy_out: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_1_qmpphy_usb_ss_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_ss_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ usb_1_qmpphy_dp_in: endpoint {
+ };
+ };
+ };
};
dc_noc: interconnect@...0000 {
@@ -1894,6 +1923,27 @@ usb_1_dwc3: usb@...0000 {
snps,hird-threshold = /bits/ 8 <0x10>;
phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
phy-names = "usb2-phy", "usb3-phy";
+ usb-role-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_1_dwc3_hs_out: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_1_dwc3_ss_out: endpoint {
+ remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
+ };
+ };
+ };
};
};
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index bc67e8c1fe4d..d2632f011353 100644
--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -19,6 +19,7 @@
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/usb/pd.h>
#include "sm7225.dtsi"
#include "pm6150l.dtsi"
#include "pm6350.dtsi"
@@ -543,6 +544,53 @@ conn-therm@1 {
};
};
+&pm7250b_typec {
+ vdd-pdphy-supply = <&vreg_l3a>;
+
+ status = "okay";
+
+ connector {
+ compatible = "usb-c-connector";
+
+ power-role = "dual";
+ data-role = "dual";
+ self-powered;
+
+ /*
+ * Disable USB Power Delivery for now, seems to need extra work
+ * to support role switching while also letting the battery
+ * charge still - without charger driver
+ */
+ typec-power-opmode = "default";
+ pd-disable;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ pm7250b_hs_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_hs_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ pm7250b_ss_in: endpoint {
+ remote-endpoint = <&usb_1_qmpphy_out>;
+ };
+ };
+ };
+ };
+};
+
+&pm7250b_vbus {
+ regulator-min-microamp = <500000>;
+ regulator-max-microamp = <1500000>;
+ status = "okay";
+};
+
&pmk8350_rtc {
status = "okay";
};
@@ -726,7 +774,11 @@ &usb_1 {
&usb_1_dwc3 {
maximum-speed = "super-speed";
- dr_mode = "peripheral";
+ dr_mode = "otg";
+};
+
+&usb_1_dwc3_hs_out {
+ remote-endpoint = <&pm7250b_hs_in>;
};
&usb_1_hsphy {
@@ -744,6 +796,10 @@ &usb_1_qmpphy {
status = "okay";
};
+&usb_1_qmpphy_out {
+ remote-endpoint = <&pm7250b_ss_in>;
+};
+
&wifi {
vdd-0.8-cx-mx-supply = <&vreg_l4a>;
vdd-1.8-xo-supply = <&vreg_l7a>;
--
2.45.1
Powered by blists - more mailing lists