lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <ZliWSBihPdkkYoTg@smile.fi.intel.com>
Date: Thu, 30 May 2024 18:07:52 +0300
From: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To: "Nechita, Ramona" <Ramona.Nechita@...log.com>
Cc: "linux-iio@...r.kernel.org" <linux-iio@...r.kernel.org>,
	Jonathan Cameron <jic23@...nel.org>,
	Lars-Peter Clausen <lars@...afoo.de>,
	"Hennerich, Michael" <Michael.Hennerich@...log.com>,
	Liam Girdwood <lgirdwood@...il.com>,
	Mark Brown <broonie@...nel.org>, "Sa, Nuno" <Nuno.Sa@...log.com>,
	Marius Cristea <marius.cristea@...rochip.com>,
	"Schmitt, Marcelo" <Marcelo.Schmitt@...log.com>,
	Maksim Kiselev <bigunclemax@...il.com>,
	Ivan Mikhaylov <fr0st61te@...il.com>,
	Marcus Folkesson <marcus.folkesson@...il.com>,
	Liam Beguin <liambeguin@...il.com>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] drivers: iio: adc: add support for ad777x family

On Wed, May 29, 2024 at 03:45:58PM +0000, Nechita, Ramona wrote:
> >On Wed, May 29, 2024 at 03:01:06PM +0000, Nechita, Ramona wrote:

..

> >> >> +	ret = ad777x_spi_write(st, AD777X_REG_SRC_N_LSB, lsb);
> >> >> +	if (ret)
> >> >> +		return ret;
> >> >> +	ret = ad777x_spi_write(st, AD777X_REG_SRC_N_MSB, msb);
> >> >> +	if (ret)
> >> >> +		return ret;
> >> >
> >> >Can you use 16-bit writes?
> >> >Same Q to all similar LSB/MSB write groups.
> >> 
> >> I cannot do 16-bit writes due to how the spi functions on the chip and 
> >> because the registers for MSB/LSB are at different addresses.
> >
> >They are supposed to be on the different addresses.
> >You mean the distance between them > than stride?
> 
> I may be misunderstanding this, but the spi read/write expects
> HeaderBit+Addr+/-Data+CRC. Writing two consecutive registers would mean
> creating a buffer with this format for each address and sending all of them
> at once, correct? I feel like that would overcomplicate the code a bit, but I
> can do it if it seems appropriate.

You can add a new ad777x_spi_bulk_write() where you perform needed magic.

-- 
With Best Regards,
Andy Shevchenko



Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ