linux-kernel - Re: [PATCH v2 1/4] arm64: dts: ti: k3-am64-phycore-som: Add serial

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <bd062517-4756-4ba3-b937-c3a2db7a9855@phytec.de>
Date: Fri, 31 May 2024 10:28:51 +0200
From: Wadim Egorov <w.egorov@...tec.de>
To: Nathan Morrisson <nmorrisson@...tec.com>, <nm@...com>, <vigneshr@...com>,
	<kristo@...nel.org>, <robh@...nel.org>, <krzk+dt@...nel.org>,
	<conor+dt@...nel.org>
CC: <linux-arm-kernel@...ts.infradead.org>, <devicetree@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>, <upstream@...ts.phytec.de>
Subject: Re: [PATCH v2 1/4] arm64: dts: ti: k3-am64-phycore-som: Add
 serial_flash label



Am 29.05.24 um 00:51 schrieb Nathan Morrisson:
> Label the spi nor as serial_flash. This allows us to disable the
> flash with an overlay common to all am6xx-phycore-som boards.
> 
> Signed-off-by: Nathan Morrisson <nmorrisson@...tec.com>

For all 3 patches,

Reviewed-by: Wadim Egorov <w.egorov@...tec.de>

> ---
> v2: No change
> 
>   arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
> index 125e507966fb..ca0bbf21f7fe 100644
> --- a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
> @@ -296,7 +296,7 @@ &ospi0 {
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&ospi0_pins_default>;
>   
> -	flash@0 {
> +	serial_flash: flash@0 {
>   		compatible = "jedec,spi-nor";
>   		reg = <0x0>;
>   		spi-tx-bus-width = <8>;