lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <d71d21ef-7e72-4962-acbe-a4cd82e6e1ca@intel.com>
Date: Fri, 31 May 2024 11:38:23 +0200
From: Wojciech Drewek <wojciech.drewek@...el.com>
To: Ricky Wu <en-wei.wu@...onical.com>, <jesse.brandeburg@...el.com>
CC: <anthony.l.nguyen@...el.com>, <davem@...emloft.net>,
	<edumazet@...gle.com>, <kuba@...nel.org>, <pabeni@...hat.com>,
	<intel-wired-lan@...ts.osuosl.org>, <netdev@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>, <rickywu0421@...il.com>,
	<michal.swiatkowski@...ux.intel.com>, <pmenzel@...gen.mpg.de>, Cyrus Lien
	<cyrus.lien@...onical.com>
Subject: Re: [PATCH net,v2] ice: avoid IRQ collision to fix init failure on
 ACPI S3 resume



On 30.05.2024 16:21, Ricky Wu wrote:
> A bug in https://bugzilla.kernel.org/show_bug.cgi?id=218906 describes
> that irdma would break and report hardware initialization failed after
> suspend/resume with Intel E810 NIC (tested on 6.9.0-rc5).
> 
> The problem is caused due to the collision between the irq numbers
> requested in irdma and the irq numbers requested in other drivers
> after suspend/resume.
> 
> The irq numbers used by irdma are derived from ice's ice_pf->msix_entries
> which stores mappings between MSI-X index and Linux interrupt number.
> It's supposed to be cleaned up when suspend and rebuilt in resume but
> it's not, causing irdma using the old irq numbers stored in the old
> ice_pf->msix_entries to request_irq() when resume. And eventually
> collide with other drivers.
> 
> This patch fixes this problem. On suspend, we call ice_deinit_rdma() to
> clean up the ice_pf->msix_entries (and free the MSI-X vectors used by
> irdma if we've dynamically allocated them). On resume, we call
> ice_init_rdma() to rebuild the ice_pf->msix_entries (and allocate the
> MSI-X vectors if we would like to dynamically allocate them).
> 
> Fixes: f9f5301e7e2d ("ice: Register auxiliary device to provide RDMA")
> Tested-by: Cyrus Lien <cyrus.lien@...onical.com>
> Signed-off-by: Ricky Wu <en-wei.wu@...onical.com>
> ---

Reviewed-by: Wojciech Drewek <wojciech.drewek@...el.com>

> Changes in v2:
> - Change title
> - Add Fixes and Tested-by tags
> - Fix typo
> ---
>  drivers/net/ethernet/intel/ice/ice_main.c | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
> index f60c022f7960..ec3cbadaa162 100644
> --- a/drivers/net/ethernet/intel/ice/ice_main.c
> +++ b/drivers/net/ethernet/intel/ice/ice_main.c
> @@ -5544,7 +5544,7 @@ static int ice_suspend(struct device *dev)
>  	 */
>  	disabled = ice_service_task_stop(pf);
>  
> -	ice_unplug_aux_dev(pf);
> +	ice_deinit_rdma(pf);
>  
>  	/* Already suspended?, then there is nothing to do */
>  	if (test_and_set_bit(ICE_SUSPENDED, pf->state)) {
> @@ -5624,6 +5624,10 @@ static int ice_resume(struct device *dev)
>  	if (ret)
>  		dev_err(dev, "Cannot restore interrupt scheme: %d\n", ret);
>  
> +	ret = ice_init_rdma(pf);
> +	if (ret)
> +		dev_err(dev, "Reinitialize RDMA during resume failed: %d\n", ret);
> +
>  	clear_bit(ICE_DOWN, pf->state);
>  	/* Now perform PF reset and rebuild */
>  	reset_type = ICE_RESET_PFR;

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ