linux-kernel - Re: [PATCH v1 04/17] iio: chemical: bme680: Fix sensor data read operation

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240603203129.GB444780@vamoiridPC>
Date: Mon, 3 Jun 2024 22:31:29 +0200
From: Vasileios Amoiridis <vassilisamir@...il.com>
To: Jonathan Cameron <jic23@...nel.org>
Cc: Vasileios Amoiridis <vassilisamir@...il.com>, lars@...afoo.de,
	himanshujha199640@...il.com, linux-iio@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH v1 04/17] iio: chemical: bme680: Fix sensor data read
 operation

On Mon, Jun 03, 2024 at 08:23:03PM +0100, Jonathan Cameron wrote:
> 
> > > > +}
> > > > +
> > > > +static void bme680_wait_for_eoc(struct bme680_data *data)  
> > > Don't call it wait as that implies something is being checked.
> > > 
> > > bme680_conversion_sleep() or something like that.
> > >   
> > 
> > This sesnor has a sleep mode, so I think calling a function like that might
> > make it a bit confusing, since we are not putting the sensor into sleeping
> > mode but rather actually wait for the eoc.
> 
> Hmm. Bikesheding time. I don't like wait because it generally implies a
> condition check.
> 
> Maybe just go more explicit
> bme680_suspend_execution_until_conversion_done()
> bme680_suspend_execution_whilst_converting()
> or similar might be overkill but something along those lines.
> 
> The suspend execution terminology lifted from man usleep
> 

Well actually I realised that I can do some condition checks so I will resubmit
and we discuss again with the new feature.

Cheers,
Vasilis

> > 
> > > > +{
> > > > +	int wait_eoc = bme680_conversion_time_us(data->oversampling_temp +
> > > > +						 data->oversampling_press +
> > > > +						 data->oversampling_press,
> > > > +						 data->heater_dur);