| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 4 Jun 2024 13:49:48 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Conor Dooley <conor@...nel.org>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
Claudiu Beznea <claudiu.beznea@...on.dev>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Lars Povlsen <lars.povlsen@...rochip.com>,
Steen Hegelund <Steen.Hegelund@...rochip.com>,
Daniel Machon <daniel.machon@...rochip.com>,
UNGLinuxDriver@...rochip.com,
linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH 1/2] arm64: dts: microchip: sparx5_pcb134: move non-MMIO nodes out of axi
simple-bus nodes, so the "axi" node, should not have non-MMIO children
as pointed out by simple-bus schema dtbs_check:
sparx5_pcb134.dtb: axi@...000000: i2c-mux-0: {'compatible': ... should not be valid under {'type': 'object'}
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
Reported-by: Rob Herring <robh@...nel.org>
Closes: https://lore.kernel.org/all/CAL_Jsq+PtL3HTKkA_gwTjb_i1mFZ+wW+qwin34HMYmwW7oNDFw@mail.gmail.com/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
.../dts/microchip/sparx5_pcb134_board.dtsi | 372 +++++++++---------
1 file changed, 194 insertions(+), 178 deletions(-)
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
index 2c5574734c9e..e60acc74e822 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
@@ -13,6 +13,20 @@ gpio-restart {
priority = <200>;
};
+ i2c0_imux: i2c-mux-0 {
+ compatible = "i2c-mux-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-parent = <&i2c0>;
+ };
+
+ i2c0_emux: i2c-mux-1 {
+ compatible = "i2c-mux-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-parent = <&i2c0>;
+ };
+
leds {
compatible = "gpio-leds";
led-0 {
@@ -248,6 +262,186 @@ led-47 {
default-state = "off";
};
};
+
+ sfp_eth12: sfp-eth12 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp1>;
+ tx-disable-gpios = <&sgpio_out2 11 1 GPIO_ACTIVE_LOW>;
+ los-gpios = <&sgpio_in2 11 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 11 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 12 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp_eth13: sfp-eth13 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp2>;
+ tx-disable-gpios = <&sgpio_out2 12 1 GPIO_ACTIVE_LOW>;
+ los-gpios = <&sgpio_in2 12 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 12 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 13 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp_eth14: sfp-eth14 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp3>;
+ tx-disable-gpios = <&sgpio_out2 13 1 GPIO_ACTIVE_LOW>;
+ los-gpios = <&sgpio_in2 13 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 13 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 14 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp_eth15: sfp-eth15 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp4>;
+ tx-disable-gpios = <&sgpio_out2 14 1 GPIO_ACTIVE_LOW>;
+ los-gpios = <&sgpio_in2 14 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 14 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 15 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp_eth48: sfp-eth48 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp5>;
+ tx-disable-gpios = <&sgpio_out2 15 1 GPIO_ACTIVE_LOW>;
+ los-gpios = <&sgpio_in2 15 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 15 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 16 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp_eth49: sfp-eth49 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp6>;
+ tx-disable-gpios = <&sgpio_out2 16 1 GPIO_ACTIVE_LOW>;
+ los-gpios = <&sgpio_in2 16 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 16 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 17 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp_eth50: sfp-eth50 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp7>;
+ tx-disable-gpios = <&sgpio_out2 17 1 GPIO_ACTIVE_LOW>;
+ los-gpios = <&sgpio_in2 17 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 17 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 18 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp_eth51: sfp-eth51 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp8>;
+ tx-disable-gpios = <&sgpio_out2 18 1 GPIO_ACTIVE_LOW>;
+ los-gpios = <&sgpio_in2 18 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 18 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 19 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp_eth52: sfp-eth52 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp9>;
+ tx-disable-gpios = <&sgpio_out2 19 1 GPIO_ACTIVE_LOW>;
+ los-gpios = <&sgpio_in2 19 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 19 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 20 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp_eth53: sfp-eth53 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp10>;
+ tx-disable-gpios = <&sgpio_out2 20 1 GPIO_ACTIVE_LOW>;
+ los-gpios = <&sgpio_in2 20 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 20 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 21 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp_eth54: sfp-eth54 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp11>;
+ tx-disable-gpios = <&sgpio_out2 21 1 GPIO_ACTIVE_LOW>;
+ los-gpios = <&sgpio_in2 21 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 21 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 22 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp_eth55: sfp-eth55 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp12>;
+ tx-disable-gpios = <&sgpio_out2 22 1 GPIO_ACTIVE_LOW>;
+ los-gpios = <&sgpio_in2 22 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 22 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 23 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp_eth56: sfp-eth56 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp13>;
+ tx-disable-gpios = <&sgpio_out2 23 1 GPIO_ACTIVE_LOW>;
+ los-gpios = <&sgpio_in2 23 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 23 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 24 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp_eth57: sfp-eth57 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp14>;
+ tx-disable-gpios = <&sgpio_out2 24 1 GPIO_ACTIVE_LOW>;
+ los-gpios = <&sgpio_in2 24 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 24 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 25 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp_eth58: sfp-eth58 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp15>;
+ tx-disable-gpios = <&sgpio_out2 25 1 GPIO_ACTIVE_LOW>;
+ los-gpios = <&sgpio_in2 25 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 25 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 26 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp_eth59: sfp-eth59 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp16>;
+ tx-disable-gpios = <&sgpio_out2 26 1 GPIO_ACTIVE_LOW>;
+ los-gpios = <&sgpio_in2 26 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 26 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 27 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp_eth60: sfp-eth60 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp17>;
+ tx-disable-gpios = <&sgpio_out2 27 1 GPIO_ACTIVE_LOW>;
+ los-gpios = <&sgpio_in2 27 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 27 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp_eth61: sfp-eth61 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp18>;
+ tx-disable-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_LOW>;
+ los-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp_eth62: sfp-eth62 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp19>;
+ tx-disable-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_LOW>;
+ los-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp_eth63: sfp-eth63 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp20>;
+ tx-disable-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_LOW>;
+ los-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
+ };
};
&sgpio0 {
@@ -385,21 +579,6 @@ i2cmux_11: i2cmux-11-pins {
};
};
-&axi {
- i2c0_imux: i2c-mux-0 {
- compatible = "i2c-mux-pinctrl";
- #address-cells = <1>;
- #size-cells = <0>;
- i2c-parent = <&i2c0>;
- };
- i2c0_emux: i2c-mux-1 {
- compatible = "i2c-mux-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
- i2c-parent = <&i2c0>;
- };
-};
-
&i2c0_imux {
pinctrl-names =
"i2c_sfp1", "i2c_sfp2", "i2c_sfp3", "i2c_sfp4",
@@ -535,169 +714,6 @@ phy64: ethernet-phy@64 {
};
};
-&axi {
- sfp_eth12: sfp-eth12 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp1>;
- tx-disable-gpios = <&sgpio_out2 11 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 11 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 11 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 12 0 GPIO_ACTIVE_HIGH>;
- };
- sfp_eth13: sfp-eth13 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp2>;
- tx-disable-gpios = <&sgpio_out2 12 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 12 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 12 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 13 0 GPIO_ACTIVE_HIGH>;
- };
- sfp_eth14: sfp-eth14 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp3>;
- tx-disable-gpios = <&sgpio_out2 13 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 13 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 13 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 14 0 GPIO_ACTIVE_HIGH>;
- };
- sfp_eth15: sfp-eth15 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp4>;
- tx-disable-gpios = <&sgpio_out2 14 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 14 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 14 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 15 0 GPIO_ACTIVE_HIGH>;
- };
- sfp_eth48: sfp-eth48 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp5>;
- tx-disable-gpios = <&sgpio_out2 15 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 15 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 15 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 16 0 GPIO_ACTIVE_HIGH>;
- };
- sfp_eth49: sfp-eth49 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp6>;
- tx-disable-gpios = <&sgpio_out2 16 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 16 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 16 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 17 0 GPIO_ACTIVE_HIGH>;
- };
- sfp_eth50: sfp-eth50 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp7>;
- tx-disable-gpios = <&sgpio_out2 17 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 17 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 17 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 18 0 GPIO_ACTIVE_HIGH>;
- };
- sfp_eth51: sfp-eth51 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp8>;
- tx-disable-gpios = <&sgpio_out2 18 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 18 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 18 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 19 0 GPIO_ACTIVE_HIGH>;
- };
- sfp_eth52: sfp-eth52 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp9>;
- tx-disable-gpios = <&sgpio_out2 19 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 19 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 19 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 20 0 GPIO_ACTIVE_HIGH>;
- };
- sfp_eth53: sfp-eth53 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp10>;
- tx-disable-gpios = <&sgpio_out2 20 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 20 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 20 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 21 0 GPIO_ACTIVE_HIGH>;
- };
- sfp_eth54: sfp-eth54 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp11>;
- tx-disable-gpios = <&sgpio_out2 21 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 21 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 21 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 22 0 GPIO_ACTIVE_HIGH>;
- };
- sfp_eth55: sfp-eth55 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp12>;
- tx-disable-gpios = <&sgpio_out2 22 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 22 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 22 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 23 0 GPIO_ACTIVE_HIGH>;
- };
- sfp_eth56: sfp-eth56 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp13>;
- tx-disable-gpios = <&sgpio_out2 23 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 23 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 23 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 24 0 GPIO_ACTIVE_HIGH>;
- };
- sfp_eth57: sfp-eth57 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp14>;
- tx-disable-gpios = <&sgpio_out2 24 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 24 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 24 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 25 0 GPIO_ACTIVE_HIGH>;
- };
- sfp_eth58: sfp-eth58 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp15>;
- tx-disable-gpios = <&sgpio_out2 25 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 25 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 25 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 26 0 GPIO_ACTIVE_HIGH>;
- };
- sfp_eth59: sfp-eth59 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp16>;
- tx-disable-gpios = <&sgpio_out2 26 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 26 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 26 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 27 0 GPIO_ACTIVE_HIGH>;
- };
- sfp_eth60: sfp-eth60 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp17>;
- tx-disable-gpios = <&sgpio_out2 27 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 27 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 27 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
- };
- sfp_eth61: sfp-eth61 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp18>;
- tx-disable-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
- };
- sfp_eth62: sfp-eth62 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp19>;
- tx-disable-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
- };
- sfp_eth63: sfp-eth63 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp20>;
- tx-disable-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_LOW>;
- los-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
- };
-};
-
&switch {
ethernet-ports {
#address-cells = <1>;
--
2.43.0
Powered by blists - more mailing lists