| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 4 Jun 2024 13:49:49 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Conor Dooley <conor@...nel.org>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
Claudiu Beznea <claudiu.beznea@...on.dev>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Lars Povlsen <lars.povlsen@...rochip.com>,
Steen Hegelund <Steen.Hegelund@...rochip.com>,
Daniel Machon <daniel.machon@...rochip.com>,
UNGLinuxDriver@...rochip.com,
linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH 2/2] arm64: dts: microchip: sparx5_pcb135: move non-MMIO nodes out of axi
simple-bus nodes, so the "axi" node, should not have non-MMIO children
as pointed out by simple-bus schema dtbs_check:
sparx5_pcb135_emmc.dtb: axi@...000000: sfp-eth60: {'compatible': ... should not be valid under {'type': 'object'}
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
Reported-by: Rob Herring <robh@...nel.org>
Closes: https://lore.kernel.org/all/CAL_Jsq+PtL3HTKkA_gwTjb_i1mFZ+wW+qwin34HMYmwW7oNDFw@mail.gmail.com/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
.../dts/microchip/sparx5_pcb135_board.dtsi | 95 +++++++++----------
1 file changed, 47 insertions(+), 48 deletions(-)
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
index af2f1831f07f..196868898f49 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
@@ -13,6 +13,13 @@ gpio-restart {
priority = <200>;
};
+ i2c0_imux: i2c-mux {
+ compatible = "i2c-mux-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-parent = <&i2c0>;
+ };
+
leds {
compatible = "gpio-leds";
led-0 {
@@ -56,6 +63,46 @@ led-7 {
default-state = "off";
};
};
+
+ sfp_eth60: sfp-eth60 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp1>;
+ tx-disable-gpios = <&sgpio_out2 28 0 GPIO_ACTIVE_LOW>;
+ rate-select0-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp_eth61: sfp-eth61 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp2>;
+ tx-disable-gpios = <&sgpio_out2 29 0 GPIO_ACTIVE_LOW>;
+ rate-select0-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp_eth62: sfp-eth62 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp3>;
+ tx-disable-gpios = <&sgpio_out2 30 0 GPIO_ACTIVE_LOW>;
+ rate-select0-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp_eth63: sfp-eth63 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp4>;
+ tx-disable-gpios = <&sgpio_out2 31 0 GPIO_ACTIVE_LOW>;
+ rate-select0-gpios = <&sgpio_out2 31 1 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in2 31 1 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in2 31 2 GPIO_ACTIVE_HIGH>;
+ };
};
&gpio {
@@ -119,15 +166,6 @@ &sgpio2 {
microchip,sgpio-port-ranges = <0 0>, <16 18>, <28 31>;
};
-&axi {
- i2c0_imux: i2c-mux {
- compatible = "i2c-mux-pinctrl";
- #address-cells = <1>;
- #size-cells = <0>;
- i2c-parent = <&i2c0>;
- };
-};
-
&i2c0_imux {
pinctrl-names =
"i2c_sfp1", "i2c_sfp2", "i2c_sfp3", "i2c_sfp4",
@@ -159,45 +197,6 @@ i2c_sfp4: i2c@3 {
};
};
-&axi {
- sfp_eth60: sfp-eth60 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp1>;
- tx-disable-gpios = <&sgpio_out2 28 0 GPIO_ACTIVE_LOW>;
- rate-select0-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_HIGH>;
- los-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_HIGH>;
- };
- sfp_eth61: sfp-eth61 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp2>;
- tx-disable-gpios = <&sgpio_out2 29 0 GPIO_ACTIVE_LOW>;
- rate-select0-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_HIGH>;
- los-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_HIGH>;
- };
- sfp_eth62: sfp-eth62 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp3>;
- tx-disable-gpios = <&sgpio_out2 30 0 GPIO_ACTIVE_LOW>;
- rate-select0-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_HIGH>;
- los-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_HIGH>;
- };
- sfp_eth63: sfp-eth63 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c_sfp4>;
- tx-disable-gpios = <&sgpio_out2 31 0 GPIO_ACTIVE_LOW>;
- rate-select0-gpios = <&sgpio_out2 31 1 GPIO_ACTIVE_HIGH>;
- los-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
- mod-def0-gpios = <&sgpio_in2 31 1 GPIO_ACTIVE_LOW>;
- tx-fault-gpios = <&sgpio_in2 31 2 GPIO_ACTIVE_HIGH>;
- };
-};
-
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
--
2.43.0
Powered by blists - more mailing lists