| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240611132730.GA1683993-robh@kernel.org>
Date: Tue, 11 Jun 2024 07:27:30 -0600
From: Rob Herring <robh@...nel.org>
To: Martin Schiller <ms@....tdt.de>
Cc: martin.blumenstingl@...glemail.com, hauke@...ke-m.de, andrew@...n.ch,
f.fainelli@...il.com, olteanv@...il.com, davem@...emloft.net,
edumazet@...gle.com, kuba@...nel.org, pabeni@...hat.com,
krzk+dt@...nel.org, conor+dt@...nel.org, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH net-next v4 01/13] dt-bindings: net: dsa: lantiq,gswip:
convert to YAML schema
On Tue, Jun 11, 2024 at 01:40:15PM +0200, Martin Schiller wrote:
> Convert the lantiq,gswip bindings to YAML format.
>
> Also add this new file to the MAINTAINERS file.
>
> Signed-off-by: Martin Schiller <ms@....tdt.de>
> ---
> .../bindings/net/dsa/lantiq,gswip.yaml | 195 ++++++++++++++++++
> .../bindings/net/dsa/lantiq-gswip.txt | 146 -------------
> MAINTAINERS | 1 +
> 3 files changed, 196 insertions(+), 146 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml
> delete mode 100644 Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
>
> diff --git a/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml b/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml
> new file mode 100644
> index 000000000000..14ef48d6a0ee
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml
> @@ -0,0 +1,195 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/dsa/lantiq,gswip.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Lantiq GSWIP Ethernet switches
> +
> +allOf:
> + - $ref: dsa.yaml#/$defs/ethernet-ports
> +
> +maintainers:
> + - Hauke Mehrtens <hauke@...ke-m.de>
> +
> +properties:
> + compatible:
> + enum:
> + - lantiq,xrx200-gswip
> + - lantiq,xrx300-gswip
> + - lantiq,xrx330-gswip
> +
> + reg:
> + minItems: 3
> + maxItems: 3
blank line
> + reg-names:
> + items:
> + - const: switch
> + - const: mdio
> + - const: mii
> +
> + mdio:
> + $ref: /schemas/net/mdio.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + compatible:
> + const: lantiq,xrx200-mdio
> +
> + required:
> + - compatible
> +
> + gphy-fw:
> + type: object
> + properties:
> + '#address-cells':
> + const: 1
blank line
> + '#size-cells':
> + const: 0
> +
> + compatible:
> + allOf:
Don't need allOf.
> + - items:
> + - enum:
> + - lantiq,xrx200-gphy-fw
> + - lantiq,xrx300-gphy-fw
> + - lantiq,xrx330-gphy-fw
> + - const: lantiq,gphy-fw
> +
> + lantiq,rcu:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description: phandle to the RCU syscon
> +
> + patternProperties:
> + "^gphy@[0-9a-f]+$":
"^gphy@[0-9a-f]{1,2]$"
> + type: object
> +
> + properties:
> + reg:
> + minimum: 0
> + maximum: 255
> + description:
> + Offset of the GPHY firmware register in the RCU register range
> +
> + resets:
> + items:
> + - description: GPHY reset line
> +
> + reset-names:
> + items:
> + - const: gphy
> +
> + required:
> + - reg
> +
> + additionalProperties: false
For indented cases, it is preferred to put this before 'properties'.
> +
> + required:
> + - compatible
> + - lantiq,rcu
> +
> + additionalProperties: false
> +
> +required:
> + - compatible
> + - reg
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + switch@...8000 {
> + compatible = "lantiq,xrx200-gswip";
> + reg = <0xe108000 0x3100>, /* switch */
> + <0xe10b100 0xd8>, /* mdio */
> + <0xe10b1d8 0x130>; /* mii */
> + dsa,member = <0 0>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + label = "lan3";
> + phy-mode = "rgmii";
> + phy-handle = <&phy0>;
> + };
> +
> + port@1 {
> + reg = <1>;
> + label = "lan4";
> + phy-mode = "rgmii";
> + phy-handle = <&phy1>;
> + };
> +
> + port@2 {
> + reg = <2>;
> + label = "lan2";
> + phy-mode = "internal";
> + phy-handle = <&phy11>;
> + };
> +
> + port@4 {
> + reg = <4>;
> + label = "lan1";
> + phy-mode = "internal";
> + phy-handle = <&phy13>;
> + };
> +
> + port@5 {
> + reg = <5>;
> + label = "wan";
> + phy-mode = "rgmii";
> + phy-handle = <&phy5>;
> + };
> +
> + port@6 {
> + reg = <0x6>;
> + ethernet = <ð0>;
> + };
> + };
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "lantiq,xrx200-mdio";
> +
> + phy0: ethernet-phy@0 {
> + reg = <0x0>;
> + };
> + phy1: ethernet-phy@1 {
> + reg = <0x1>;
> + };
> + phy5: ethernet-phy@5 {
> + reg = <0x5>;
> + };
> + phy11: ethernet-phy@11 {
> + reg = <0x11>;
> + };
> + phy13: ethernet-phy@13 {
> + reg = <0x13>;
> + };
> + };
> +
> + gphy-fw {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "lantiq,xrx200-gphy-fw", "lantiq,gphy-fw";
> + lantiq,rcu = <&rcu0>;
> +
> + gphy@20 {
> + reg = <0x20>;
> +
> + resets = <&reset0 31 30>;
> + reset-names = "gphy";
> + };
> +
> + gphy@68 {
> + reg = <0x68>;
> +
> + resets = <&reset0 29 28>;
> + reset-names = "gphy";
> + };
> + };
> + };
Powered by blists - more mailing lists