lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <57506a95-4667-495d-80c5-d9fa0f6be215@the-space.agency>
Date: Thu, 13 Jun 2024 00:25:10 +0200
From: me@...-space.agency
To: Sebastian Kropatsch <seb-dev@...l.de>, Heiko Stuebner <heiko@...ech.de>,
 linux-rockchip@...ts.infradead.org
Cc: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
 Conor Dooley <conor+dt@...nel.org>,
 Sebastian Reichel <sebastian.reichel@...labora.com>,
 Jonas Karlman <jonas@...boo.se>, devicetree@...r.kernel.org,
 linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 2/2] arm64: dts: rockchip: Add FriendlyElec CM3588 NAS
 board

On 10.06.2024 00:20, Sebastian Kropatsch wrote:
> The CM3588 NAS by FriendlyElec pairs the CM3588 compute module, based on
> the Rockchip RK3588 SoC, with the CM3588 NAS Kit carrier board.
> To reflect the hardware setup, add device tree sources for the SoM and
> the NAS daughter board as separate files.
> 
> Hardware features:
>      - Rockchip RK3588 SoC
>      - 4GB/8GB/16GB LPDDR4x RAM
>      - 64GB eMMC
>      - MicroSD card slot
>      - 1x RTL8125B 2.5G Ethernet
>      - 4x M.2 M-Key with PCIe 3.0 x1 (via bifurcation) for NVMe SSDs
>      - 2x USB 3.0 (USB 3.1 Gen1) Type-A, 1x USB 2.0 Type-A
>      - 1x USB 3.0 Type-C with DP AltMode support
>      - 2x HDMI 2.1 out, 1x HDMI in
>      - MIPI-CSI Connector, MIPI-DSI Connector
>      - 40-pin GPIO header
>      - 4 buttons: power, reset, recovery, MASK, user button
>      - 3.5mm Headphone out, 2.0mm PH-2A Mic in
>      - 5V Fan connector, PWM buzzer, IR receiver, RTC battery connector
> 
> PCIe bifurcation is used to handle all four M.2 sockets at PCIe 3.0 x1
> speed. Data lane mapping in the DT is done like described in commit
> f8020dfb311d ("phy: rockchip-snps-pcie3: fix bifurcation on rk3588").
> 
> This device tree includes support for eMMC, SD card, ethernet, all USB2
> and USB3 ports, all four M.2 slots, GPU, RTC, buzzer, UART debugging as
> well as the buttons and LEDs.
> The GPIOs are labeled according to the schematics.
> 
> Signed-off-by: Sebastian Kropatsch <seb-dev@...l.de>
> ---
>   arch/arm64/boot/dts/rockchip/Makefile         |   1 +
>   .../rk3588-friendlyelec-cm3588-nas.dts        | 759 ++++++++++++++++++
>   .../rockchip/rk3588-friendlyelec-cm3588.dtsi  | 655 +++++++++++++++
>   3 files changed, 1415 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts
>   create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588.dtsi


Reviewed-by: Space Meyer <git@...-space.agency>

Confirmed v3 fixed the usb-c port. I only tested with a single USB 2 
device, as I'm not home at the moment and don't have many options to 
test things here.

Cheers,
Space

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ