[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5aaf6d52-eaea-4de9-a53e-a6b61cbef35d@ti.com>
Date: Thu, 13 Jun 2024 14:19:55 +0530
From: Aradhya Bhatia <a-bhatia1@...com>
To: Jayesh Choudhary <j-choudhary@...com>, <linux-kernel@...r.kernel.org>,
<dmitry.baryshkov@...aro.org>, <sui.jingfeng@...ux.dev>,
<andrzej.hajda@...el.com>, <neil.armstrong@...aro.org>,
<rfoss@...nel.org>, <Laurent.pinchart@...asonboard.com>,
<mripard@...nel.org>, <sam@...nborg.org>
CC: <jonas@...boo.se>, <jernej.skrabec@...il.com>,
<maarten.lankhorst@...ux.intel.com>, <tzimmermann@...e.de>,
<airlied@...il.com>, <daniel@...ll.ch>,
<dri-devel@...ts.freedesktop.org>
Subject: Re: [PATCH v5 1/3] drm/bridge: sii902x: Fix mode_valid hook
Hi Jayesh,
Thanks for the patches!
On 13-Jun-24 14:08, Jayesh Choudhary wrote:
> Currently, mode_valid is defined only in drm_connector_helper_funcs.
> When the bridge is attached with the 'DRM_BRIDGE_ATTACH_NO_CONNECTOR'
> flag, the connector is not initialized, and so is the mode_valid
> hook under connector helper funcs.
> It also returns MODE_OK for all modes without actually checking the
> modes.
> So move the mode_valid hook to drm_bridge_funcs with proper clock
> checks for maximum and minimum pixel clock supported by the bridge.
>
> Signed-off-by: Jayesh Choudhary <j-choudhary@...com>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
> Acked-by: Sui Jingfeng <sui.jingfeng@...ux.dev>
> ---
> drivers/gpu/drm/bridge/sii902x.c | 32 +++++++++++++++++++++++---------
> 1 file changed, 23 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c
> index 2fbeda9025bf..6a6055a4ccf9 100644
> --- a/drivers/gpu/drm/bridge/sii902x.c
> +++ b/drivers/gpu/drm/bridge/sii902x.c
> @@ -163,6 +163,14 @@
>
> #define SII902X_AUDIO_PORT_INDEX 3
>
> +/*
> + * The maximum resolution supported by the HDMI bridge is 1080p@...z
> + * and 1920x1200 requiring a pixel clock of 165MHz and the minimum
> + * resolution supported is 480p@...z requiring a pixel clock of 25MHz
> + */
> +#define SII902X_MIN_PIXEL_CLOCK_KHZ 25000
> +#define SII902X_MAX_PIXEL_CLOCK_KHZ 165000
> +
> struct sii902x {
> struct i2c_client *i2c;
> struct regmap *regmap;
> @@ -310,17 +318,8 @@ static int sii902x_get_modes(struct drm_connector *connector)
> return num;
> }
>
> -static enum drm_mode_status sii902x_mode_valid(struct drm_connector *connector,
> - struct drm_display_mode *mode)
> -{
> - /* TODO: check mode */
> -
> - return MODE_OK;
> -}
> -
> static const struct drm_connector_helper_funcs sii902x_connector_helper_funcs = {
> .get_modes = sii902x_get_modes,
> - .mode_valid = sii902x_mode_valid,
> };
>
> static void sii902x_bridge_disable(struct drm_bridge *bridge)
> @@ -504,6 +503,20 @@ static int sii902x_bridge_atomic_check(struct drm_bridge *bridge,
> return 0;
> }
>
> +static enum drm_mode_status
> +sii902x_bridge_mode_valid(struct drm_bridge *bridge,
> + const struct drm_display_info *info,
> + const struct drm_display_mode *mode)
> +{
> + if (mode->clock < SII902X_MIN_PIXEL_CLOCK_KHZ)
> + return MODE_CLOCK_LOW;
> +
> + if (mode->clock > SII902X_MAX_PIXEL_CLOCK_KHZ)
> + return MODE_CLOCK_HIGH;
> +
> + return MODE_OK;
> +}
> +
> static const struct drm_bridge_funcs sii902x_bridge_funcs = {
> .attach = sii902x_bridge_attach,
> .mode_set = sii902x_bridge_mode_set,
> @@ -516,6 +529,7 @@ static const struct drm_bridge_funcs sii902x_bridge_funcs = {
> .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
> .atomic_get_input_bus_fmts = sii902x_bridge_atomic_get_input_bus_fmts,
> .atomic_check = sii902x_bridge_atomic_check,
> + .mode_valid = sii902x_bridge_mode_valid,
> };
>
> static int sii902x_mute(struct sii902x *sii902x, bool mute)
Reviewed-by: Aradhya Bhatia <a-bhatia1@...com>
--
Regards
Aradhya
Powered by blists - more mailing lists