| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240614-dt-bindings-thermal-allof-v1-22-30b25a6ae24e@linaro.org>
Date: Fri, 14 Jun 2024 11:46:21 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Daniel Lezcano <daniel.lezcano@...aro.org>,
Zhang Rui <rui.zhang@...el.com>, Lukasz Luba <lukasz.luba@....com>,
Rob Herring <robh@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
Alim Akhtar <alim.akhtar@...sung.com>,
Guillaume La Roque <glaroque@...libre.com>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Vasily Khoruzhick <anarsoul@...il.com>, Chen-Yu Tsai <wens@...e.org>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Samuel Holland <samuel@...lland.org>, Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>, Anson Huang <Anson.Huang@....com>,
Thierry Reding <thierry.reding@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
Amit Kucheria <amitk@...nel.org>,
Niklas Söderlund <niklas.soderlund@...natech.se>,
Heiko Stuebner <heiko@...ech.de>, Biju Das <biju.das.jz@...renesas.com>,
Orson Zhai <orsonzhai@...il.com>,
Baolin Wang <baolin.wang@...ux.alibaba.com>,
Chunyan Zhang <zhang.lyra@...il.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Pascal Paillet <p.paillet@...s.st.com>, Keerthy <j-keerthy@...com>,
Broadcom internal kernel review list <bcm-kernel-feedback-list@...adcom.com>,
Florian Fainelli <florian.fainelli@...adcom.com>,
Scott Branden <sbranden@...adcom.com>,
zhanghongchen <zhanghongchen@...ngson.cn>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
Bjorn Andersson <andersson@...nel.org>,
Geert Uytterhoeven <geert+renesas@...der.be>
Cc: linux-pm@...r.kernel.org, linux-samsung-soc@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-amlogic@...ts.infradead.org,
linux-sunxi@...ts.linux.dev, imx@...ts.linux.dev,
linux-tegra@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-renesas-soc@...r.kernel.org, linux-rockchip@...ts.infradead.org,
linux-stm32@...md-mailman.stormreply.com,
Florian Fainelli <f.fainelli@...il.com>,
linux-rpi-kernel@...ts.infradead.org, linux-mediatek@...ts.infradead.org,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH 22/22] dt-bindings: thermal: cleanup examples indentation
Preferred indentation for DTS examples in the bindings is 4-space. It
is also preferred not to have redundant/unused labels. No functional
change
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
.../bindings/thermal/amlogic,thermal.yaml | 18 ++---
.../bindings/thermal/brcm,avs-ro-thermal.yaml | 16 ++--
.../devicetree/bindings/thermal/brcm,avs-tmon.yaml | 16 ++--
.../devicetree/bindings/thermal/qcom-tsens.yaml | 88 ++++++++++------------
.../bindings/thermal/rcar-gen3-thermal.yaml | 64 ++++++++--------
.../devicetree/bindings/thermal/rcar-thermal.yaml | 60 +++++++--------
.../devicetree/bindings/thermal/rzg2l-thermal.yaml | 36 ++++-----
.../devicetree/bindings/thermal/sprd-thermal.yaml | 42 +++++------
.../bindings/thermal/ti,am654-thermal.yaml | 10 +--
9 files changed, 172 insertions(+), 178 deletions(-)
diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
index e52fc40e215d..725303e1a364 100644
--- a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
@@ -50,13 +50,13 @@ unevaluatedProperties: false
examples:
- |
- cpu_temp: temperature-sensor@...34800 {
- compatible = "amlogic,g12a-cpu-thermal",
- "amlogic,g12a-thermal";
- reg = <0xff634800 0x50>;
- interrupts = <0x0 0x24 0x0>;
- clocks = <&clk 164>;
- #thermal-sensor-cells = <0>;
- amlogic,ao-secure = <&sec_AO>;
- };
+ temperature-sensor@...34800 {
+ compatible = "amlogic,g12a-cpu-thermal",
+ "amlogic,g12a-thermal";
+ reg = <0xff634800 0x50>;
+ interrupts = <0x0 0x24 0x0>;
+ clocks = <&clk 164>;
+ #thermal-sensor-cells = <0>;
+ amlogic,ao-secure = <&sec_AO>;
+ };
...
diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml
index 0271a0bc1843..29a9844e8b48 100644
--- a/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml
@@ -35,14 +35,14 @@ unevaluatedProperties: false
examples:
- |
- avs-monitor@...d2000 {
- compatible = "brcm,bcm2711-avs-monitor",
- "syscon", "simple-mfd";
- reg = <0x7d5d2000 0xf00>;
+ avs-monitor@...d2000 {
+ compatible = "brcm,bcm2711-avs-monitor",
+ "syscon", "simple-mfd";
+ reg = <0x7d5d2000 0xf00>;
- thermal: thermal {
- compatible = "brcm,bcm2711-thermal";
- #thermal-sensor-cells = <0>;
- };
+ thermal: thermal {
+ compatible = "brcm,bcm2711-thermal";
+ #thermal-sensor-cells = <0>;
};
+ };
...
diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml
index 32730211e15b..081486b44382 100644
--- a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml
+++ b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml
@@ -45,11 +45,11 @@ required:
examples:
- |
- thermal@...d1500 {
- compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-tmon";
- reg = <0xf04d1500 0x28>;
- interrupts = <0x6>;
- interrupt-names = "tmon";
- interrupt-parent = <&avs_host_l2_intc>;
- #thermal-sensor-cells = <0>;
- };
+ thermal@...d1500 {
+ compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-tmon";
+ reg = <0xf04d1500 0x28>;
+ interrupts = <0x6>;
+ interrupt-names = "tmon";
+ interrupt-parent = <&avs_host_l2_intc>;
+ #thermal-sensor-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index cce6624228c7..01f9f45b94c2 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -295,22 +295,16 @@ unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
- // Example msm9860 based SoC (ipq8064):
- gcc: clock-controller {
+ thermal-sensor {
+ compatible = "qcom,ipq8064-tsens";
- /* ... */
+ nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
+ nvmem-cell-names = "calib", "calib_backup";
+ interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow";
- tsens: thermal-sensor {
- compatible = "qcom,ipq8064-tsens";
-
- nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
- nvmem-cell-names = "calib", "calib_backup";
- interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow";
-
- #qcom,sensors = <11>;
- #thermal-sensor-cells = <1>;
- };
+ #qcom,sensors = <11>;
+ #thermal-sensor-cells = <1>;
};
- |
@@ -347,66 +341,66 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
// Example 1 (legacy: for pre v1 IP):
tsens1: thermal-sensor@...000 {
- compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
- reg = <0x4a9000 0x1000>, /* TM */
- <0x4a8000 0x1000>; /* SROT */
+ compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
+ reg = <0x4a9000 0x1000>, /* TM */
+ <0x4a8000 0x1000>; /* SROT */
- nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
- nvmem-cell-names = "calib", "calib_sel";
+ nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
+ nvmem-cell-names = "calib", "calib_sel";
- interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow";
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow";
- #qcom,sensors = <5>;
- #thermal-sensor-cells = <1>;
+ #qcom,sensors = <5>;
+ #thermal-sensor-cells = <1>;
};
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
// Example 2 (for any platform containing v1 of the TSENS IP):
tsens2: thermal-sensor@...000 {
- compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
- reg = <0x004a9000 0x1000>, /* TM */
- <0x004a8000 0x1000>; /* SROT */
+ compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
+ reg = <0x004a9000 0x1000>, /* TM */
+ <0x004a8000 0x1000>; /* SROT */
- nvmem-cells = <&tsens_caldata>;
- nvmem-cell-names = "calib";
+ nvmem-cells = <&tsens_caldata>;
+ nvmem-cell-names = "calib";
- interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow";
+ interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow";
- #qcom,sensors = <10>;
- #thermal-sensor-cells = <1>;
+ #qcom,sensors = <10>;
+ #thermal-sensor-cells = <1>;
};
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
// Example 3 (for any platform containing v2 of the TSENS IP):
tsens3: thermal-sensor@...3000 {
- compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
- reg = <0xc263000 0x1ff>,
- <0xc222000 0x1ff>;
+ compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+ reg = <0xc263000 0x1ff>,
+ <0xc222000 0x1ff>;
- interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow", "critical";
+ interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
- #qcom,sensors = <13>;
- #thermal-sensor-cells = <1>;
+ #qcom,sensors = <13>;
+ #thermal-sensor-cells = <1>;
};
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
// Example 4 (for any IPQ8074 based SoC-s):
tsens4: thermal-sensor@...000 {
- compatible = "qcom,ipq8074-tsens";
- reg = <0x4a9000 0x1000>,
- <0x4a8000 0x1000>;
+ compatible = "qcom,ipq8074-tsens";
+ reg = <0x4a9000 0x1000>,
+ <0x4a8000 0x1000>;
- interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "combined";
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "combined";
- #qcom,sensors = <16>;
- #thermal-sensor-cells = <1>;
+ #qcom,sensors = <16>;
+ #thermal-sensor-cells = <1>;
};
...
diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
index d92e882c9e8d..b6657d64cf3d 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
@@ -106,33 +106,33 @@ examples:
#include <dt-bindings/power/r8a7795-sysc.h>
tsc: thermal@...98000 {
- compatible = "renesas,r8a7795-thermal";
- reg = <0xe6198000 0x100>,
- <0xe61a0000 0x100>,
- <0xe61a8000 0x100>;
- interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 522>;
- power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 522>;
- #thermal-sensor-cells = <1>;
+ compatible = "renesas,r8a7795-thermal";
+ reg = <0xe6198000 0x100>,
+ <0xe61a0000 0x100>,
+ <0xe61a8000 0x100>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 522>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 522>;
+ #thermal-sensor-cells = <1>;
};
thermal-zones {
- sensor_thermal: sensor-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
- thermal-sensors = <&tsc 0>;
+ sensor_thermal: sensor-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 0>;
- trips {
- sensor1_crit: sensor1-crit {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
+ trips {
+ sensor1_crit: sensor1-crit {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
+ };
};
- |
#include <dt-bindings/clock/r8a779a0-cpg-mssr.h>
@@ -140,14 +140,14 @@ examples:
#include <dt-bindings/power/r8a779a0-sysc.h>
tsc_r8a779a0: thermal@...90000 {
- compatible = "renesas,r8a779a0-thermal";
- reg = <0xe6190000 0x200>,
- <0xe6198000 0x200>,
- <0xe61a0000 0x200>,
- <0xe61a8000 0x200>,
- <0xe61b0000 0x200>;
- clocks = <&cpg CPG_MOD 919>;
- power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
- resets = <&cpg 919>;
- #thermal-sensor-cells = <1>;
+ compatible = "renesas,r8a779a0-thermal";
+ reg = <0xe6190000 0x200>,
+ <0xe6198000 0x200>,
+ <0xe61a0000 0x200>,
+ <0xe61a8000 0x200>,
+ <0xe61b0000 0x200>;
+ clocks = <&cpg CPG_MOD 919>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 919>;
+ #thermal-sensor-cells = <1>;
};
diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml
index 119998d10ff4..221a58d18cad 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml
@@ -98,8 +98,8 @@ examples:
# Example (non interrupt support)
- |
thermal@...48000 {
- compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal";
- reg = <0xffc48000 0x38>;
+ compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal";
+ reg = <0xffc48000 0x38>;
};
# Example (interrupt support)
@@ -109,12 +109,12 @@ examples:
#include <dt-bindings/interrupt-controller/irq.h>
thermal@...f0000 {
- compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
- reg = <0xe61f0000 0x14>, <0xe61f0100 0x38>,
- <0xe61f0200 0x38>, <0xe61f0300 0x38>;
- interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>;
- power-domains = <&pd_c5>;
+ compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
+ reg = <0xe61f0000 0x14>, <0xe61f0100 0x38>,
+ <0xe61f0200 0x38>, <0xe61f0300 0x38>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>;
+ power-domains = <&pd_c5>;
};
# Example (with thermal-zone)
@@ -124,32 +124,32 @@ examples:
#include <dt-bindings/power/r8a7790-sysc.h>
thermal: thermal@...f0000 {
- compatible = "renesas,thermal-r8a7790",
- "renesas,rcar-gen2-thermal",
- "renesas,rcar-thermal";
- reg = <0xe61f0000 0x10>, <0xe61f0100 0x38>;
- interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 522>;
- power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
- resets = <&cpg 522>;
- #thermal-sensor-cells = <0>;
+ compatible = "renesas,thermal-r8a7790",
+ "renesas,rcar-gen2-thermal",
+ "renesas,rcar-thermal";
+ reg = <0xe61f0000 0x10>, <0xe61f0100 0x38>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 522>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 522>;
+ #thermal-sensor-cells = <0>;
};
thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <1000>;
- polling-delay = <5000>;
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
- thermal-sensors = <&thermal>;
+ thermal-sensors = <&thermal>;
- trips {
- cpu-crit {
- temperature = <115000>;
- hysteresis = <0>;
- type = "critical";
- };
- };
- cooling-maps {
- };
+ trips {
+ cpu-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
};
+ cooling-maps {
+ };
+ };
};
diff --git a/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml b/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml
index 2f96c0fe0f75..136589f5adee 100644
--- a/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml
@@ -53,27 +53,27 @@ examples:
#include <dt-bindings/clock/r9a07g044-cpg.h>
tsu: thermal@...59400 {
- compatible = "renesas,r9a07g044-tsu",
- "renesas,rzg2l-tsu";
- reg = <0x10059400 0x400>;
- clocks = <&cpg CPG_MOD R9A07G044_TSU_PCLK>;
- resets = <&cpg R9A07G044_TSU_PRESETN>;
- power-domains = <&cpg>;
- #thermal-sensor-cells = <1>;
+ compatible = "renesas,r9a07g044-tsu",
+ "renesas,rzg2l-tsu";
+ reg = <0x10059400 0x400>;
+ clocks = <&cpg CPG_MOD R9A07G044_TSU_PCLK>;
+ resets = <&cpg R9A07G044_TSU_PRESETN>;
+ power-domains = <&cpg>;
+ #thermal-sensor-cells = <1>;
};
thermal-zones {
- cpu-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
- thermal-sensors = <&tsu 0>;
+ cpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsu 0>;
- trips {
- sensor_crit: sensor-crit {
- temperature = <125000>;
- hysteresis = <1000>;
- type = "critical";
- };
- };
+ trips {
+ sensor_crit: sensor-crit {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
};
+ };
};
diff --git a/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml b/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml
index f65076fc68f9..afa551f6185f 100644
--- a/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml
@@ -86,27 +86,27 @@ unevaluatedProperties: false
examples:
- |
- ap_thm0: thermal@...00000 {
- compatible = "sprd,ums512-thermal";
- reg = <0x32200000 0x10000>;
- clock-names = "enable";
- clocks = <&aonapb_gate 32>;
- #thermal-sensor-cells = <1>;
- nvmem-cells = <&thm0_sign>, <&thm0_ratio>;
- nvmem-cell-names = "thm_sign_cal", "thm_ratio_cal";
- #address-cells = <1>;
- #size-cells = <0>;
+ thermal@...00000 {
+ compatible = "sprd,ums512-thermal";
+ reg = <0x32200000 0x10000>;
+ clock-names = "enable";
+ clocks = <&aonapb_gate 32>;
+ #thermal-sensor-cells = <1>;
+ nvmem-cells = <&thm0_sign>, <&thm0_ratio>;
+ nvmem-cell-names = "thm_sign_cal", "thm_ratio_cal";
+ #address-cells = <1>;
+ #size-cells = <0>;
- prometheus-sensor@0 {
- reg = <0>;
- nvmem-cells = <&thm0_sen0>;
- nvmem-cell-names = "sen_delta_cal";
- };
-
- ank-sensor@1 {
- reg = <1>;
- nvmem-cells = <&thm0_sen1>;
- nvmem-cell-names = "sen_delta_cal";
- };
+ prometheus-sensor@0 {
+ reg = <0>;
+ nvmem-cells = <&thm0_sen0>;
+ nvmem-cell-names = "sen_delta_cal";
};
+
+ ank-sensor@1 {
+ reg = <1>;
+ nvmem-cells = <&thm0_sen1>;
+ nvmem-cell-names = "sen_delta_cal";
+ };
+ };
...
diff --git a/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
index 16801aa78bc2..c123d9070525 100644
--- a/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
@@ -47,11 +47,11 @@ examples:
thermal-sensors = <&vtm0 0>;
trips {
- mpu0_crit: mpu0_crit {
- temperature = <125000>; /* milliCelsius */
- hysteresis = <2000>; /* milliCelsius */
- type = "critical";
- };
+ mpu0_crit: mpu0_crit {
+ temperature = <125000>; /* milliCelsius */
+ hysteresis = <2000>; /* milliCelsius */
+ type = "critical";
+ };
};
};
...
--
2.43.0
Powered by blists - more mailing lists