| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <378bc964b49f9e9954336e99009932ac22bfe172.1718603656.git.mschiffer@universe-factory.net>
Date: Mon, 17 Jun 2024 20:30:00 +0200
From: Matthias Schiffer <mschiffer@...verse-factory.net>
To: Arınç ÜNAL <arinc.unal@...nc9.com>,
Daniel Golle <daniel@...rotopia.org>,
DENG Qingfang <dqfext@...il.com>,
Sean Wang <sean.wang@...iatek.com>
Cc: Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
netdev@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org,
Matthias Schiffer <mschiffer@...verse-factory.net>
Subject: [PATCH net-next v2 1/2] net: dsa: mt7530: factor out bridge join/leave logic
As preparation for implementing bridge port isolation, move the logic to
add and remove bits in the port matrix into a new helper
mt7530_update_port_member(), which is called from
mt7530_port_bridge_join() and mt7530_port_bridge_leave().
No functional change intended.
Signed-off-by: Matthias Schiffer <mschiffer@...verse-factory.net>
---
v2: no changes
drivers/net/dsa/mt7530.c | 103 +++++++++++++++++----------------------
1 file changed, 46 insertions(+), 57 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 598434d8d6e4..ecacaefdd694 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1302,6 +1302,50 @@ mt7530_stp_state_set(struct dsa_switch *ds, int port, u8 state)
FID_PST(FID_BRIDGED, stp_state));
}
+static void mt7530_update_port_member(struct mt7530_priv *priv, int port,
+ const struct net_device *bridge_dev, bool join)
+ __must_hold(&priv->reg_mutex)
+{
+ struct dsa_port *dp = dsa_to_port(priv->ds, port), *other_dp;
+ struct mt7530_port *p = &priv->ports[port], *other_p;
+ struct dsa_port *cpu_dp = dp->cpu_dp;
+ u32 port_bitmap = BIT(cpu_dp->index);
+ int other_port;
+
+ dsa_switch_for_each_user_port(other_dp, priv->ds) {
+ other_port = other_dp->index;
+ other_p = &priv->ports[other_port];
+
+ if (dp == other_dp)
+ continue;
+
+ /* Add/remove this port to/from the port matrix of the other
+ * ports in the same bridge. If the port is disabled, port
+ * matrix is kept and not being setup until the port becomes
+ * enabled.
+ */
+ if (!dsa_port_offloads_bridge_dev(other_dp, bridge_dev))
+ continue;
+
+ if (join) {
+ other_p->pm |= PCR_MATRIX(BIT(port));
+ port_bitmap |= BIT(other_port);
+ } else {
+ other_p->pm &= ~PCR_MATRIX(BIT(port));
+ }
+
+ if (other_p->enable)
+ mt7530_rmw(priv, MT7530_PCR_P(other_port),
+ PCR_MATRIX_MASK, other_p->pm);
+ }
+
+ /* Add/remove the all other ports to this port matrix. */
+ p->pm = PCR_MATRIX(port_bitmap);
+ if (priv->ports[port].enable)
+ mt7530_rmw(priv, MT7530_PCR_P(port),
+ PCR_MATRIX_MASK, p->pm);
+}
+
static int
mt7530_port_pre_bridge_flags(struct dsa_switch *ds, int port,
struct switchdev_brport_flags flags,
@@ -1345,39 +1389,11 @@ mt7530_port_bridge_join(struct dsa_switch *ds, int port,
struct dsa_bridge bridge, bool *tx_fwd_offload,
struct netlink_ext_ack *extack)
{
- struct dsa_port *dp = dsa_to_port(ds, port), *other_dp;
- struct dsa_port *cpu_dp = dp->cpu_dp;
- u32 port_bitmap = BIT(cpu_dp->index);
struct mt7530_priv *priv = ds->priv;
mutex_lock(&priv->reg_mutex);
- dsa_switch_for_each_user_port(other_dp, ds) {
- int other_port = other_dp->index;
-
- if (dp == other_dp)
- continue;
-
- /* Add this port to the port matrix of the other ports in the
- * same bridge. If the port is disabled, port matrix is kept
- * and not being setup until the port becomes enabled.
- */
- if (!dsa_port_offloads_bridge(other_dp, &bridge))
- continue;
-
- if (priv->ports[other_port].enable)
- mt7530_set(priv, MT7530_PCR_P(other_port),
- PCR_MATRIX(BIT(port)));
- priv->ports[other_port].pm |= PCR_MATRIX(BIT(port));
-
- port_bitmap |= BIT(other_port);
- }
-
- /* Add the all other ports to this port matrix. */
- if (priv->ports[port].enable)
- mt7530_rmw(priv, MT7530_PCR_P(port),
- PCR_MATRIX_MASK, PCR_MATRIX(port_bitmap));
- priv->ports[port].pm |= PCR_MATRIX(port_bitmap);
+ mt7530_update_port_member(priv, port, bridge.dev, true);
/* Set to fallback mode for independent VLAN learning */
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
@@ -1478,38 +1494,11 @@ static void
mt7530_port_bridge_leave(struct dsa_switch *ds, int port,
struct dsa_bridge bridge)
{
- struct dsa_port *dp = dsa_to_port(ds, port), *other_dp;
- struct dsa_port *cpu_dp = dp->cpu_dp;
struct mt7530_priv *priv = ds->priv;
mutex_lock(&priv->reg_mutex);
- dsa_switch_for_each_user_port(other_dp, ds) {
- int other_port = other_dp->index;
-
- if (dp == other_dp)
- continue;
-
- /* Remove this port from the port matrix of the other ports
- * in the same bridge. If the port is disabled, port matrix
- * is kept and not being setup until the port becomes enabled.
- */
- if (!dsa_port_offloads_bridge(other_dp, &bridge))
- continue;
-
- if (priv->ports[other_port].enable)
- mt7530_clear(priv, MT7530_PCR_P(other_port),
- PCR_MATRIX(BIT(port)));
- priv->ports[other_port].pm &= ~PCR_MATRIX(BIT(port));
- }
-
- /* Set the cpu port to be the only one in the port matrix of
- * this port.
- */
- if (priv->ports[port].enable)
- mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
- PCR_MATRIX(BIT(cpu_dp->index)));
- priv->ports[port].pm = PCR_MATRIX(BIT(cpu_dp->index));
+ mt7530_update_port_member(priv, port, bridge.dev, false);
/* When a port is removed from the bridge, the port would be set up
* back to the default as is at initial boot which is a VLAN-unaware
--
2.45.2
Powered by blists - more mailing lists