[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZnSeEVpz/rB0Ztbh@p14s>
Date: Thu, 20 Jun 2024 15:24:33 -0600
From: Mathieu Poirier <mathieu.poirier@...aro.org>
To: Arnaud POULIQUEN <arnaud.pouliquen@...s.st.com>
Cc: Bjorn Andersson <andersson@...nel.org>,
Jens Wiklander <jens.wiklander@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org,
linux-remoteproc@...r.kernel.org, linux-kernel@...r.kernel.org,
op-tee@...ts.trustedfirmware.org, devicetree@...r.kernel.org
Subject: Re: [PATCH v7 2/5] remoteproc: Add TEE support
On Wed, Jun 19, 2024 at 06:33:05PM +0200, Arnaud POULIQUEN wrote:
> Hi,
>
> On 6/19/24 17:41, Mathieu Poirier wrote:
> > Hi,
> >
> > On Tue, Jun 11, 2024 at 09:39:01AM +0200, Arnaud Pouliquen wrote:
> >> Add a remoteproc TEE (Trusted Execution Environment) driver
> >> that will be probed by the TEE bus. If the associated Trusted
> >> application is supported on secure part this driver offers a client
> >> interface to load a firmware in the secure part.
> >> This firmware could be authenticated by the secure trusted application.
> >>
> >> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@...s.st.com>
> >> ---
> >> update from V
> >> - Fix missing "{" in tee_rproc_find_loaded_rsc_table inline definition.
> >>
> >> update from V5
> >> - make tee_rproc_get_loaded_rsc_table() local and replace this API by
> >> tee_rproc_find_loaded_rsc_table()
> >> - map and unmap the resource table in tee_rproc_parse_fw to make a cached copy
> >> - use the new rproc_pa_to_va() API to map the resource table memory declared in carevout
> >> - remove tee_rproc_release_loaded_rsc_table as no more used.
> >> ---
> >> drivers/remoteproc/Kconfig | 10 +
> >> drivers/remoteproc/Makefile | 1 +
> >> drivers/remoteproc/tee_remoteproc.c | 451 ++++++++++++++++++++++++++++
> >> include/linux/remoteproc.h | 4 +
> >> include/linux/tee_remoteproc.h | 100 ++++++
> >> 5 files changed, 566 insertions(+)
> >> create mode 100644 drivers/remoteproc/tee_remoteproc.c
> >> create mode 100644 include/linux/tee_remoteproc.h
> >>
> >> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> >> index 48845dc8fa85..6c1c07202276 100644
> >> --- a/drivers/remoteproc/Kconfig
> >> +++ b/drivers/remoteproc/Kconfig
> >> @@ -365,6 +365,16 @@ config XLNX_R5_REMOTEPROC
> >>
> >> It's safe to say N if not interested in using RPU r5f cores.
> >>
> >> +
> >> +config TEE_REMOTEPROC
> >> + tristate "Remoteproc support by a TEE application"
> >> + depends on OPTEE
> >> + help
> >> + Support a remote processor with a TEE application. The Trusted
> >> + Execution Context is responsible for loading the trusted firmware
> >> + image and managing the remote processor's lifecycle.
> >> + This can be either built-in or a loadable module.
> >> +
> >> endif # REMOTEPROC
> >>
> >> endmenu
> >> diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
> >> index 91314a9b43ce..fa8daebce277 100644
> >> --- a/drivers/remoteproc/Makefile
> >> +++ b/drivers/remoteproc/Makefile
> >> @@ -36,6 +36,7 @@ obj-$(CONFIG_RCAR_REMOTEPROC) += rcar_rproc.o
> >> obj-$(CONFIG_ST_REMOTEPROC) += st_remoteproc.o
> >> obj-$(CONFIG_ST_SLIM_REMOTEPROC) += st_slim_rproc.o
> >> obj-$(CONFIG_STM32_RPROC) += stm32_rproc.o
> >> +obj-$(CONFIG_TEE_REMOTEPROC) += tee_remoteproc.o
> >> obj-$(CONFIG_TI_K3_DSP_REMOTEPROC) += ti_k3_dsp_remoteproc.o
> >> obj-$(CONFIG_TI_K3_R5_REMOTEPROC) += ti_k3_r5_remoteproc.o
> >> obj-$(CONFIG_XLNX_R5_REMOTEPROC) += xlnx_r5_remoteproc.o
> >> diff --git a/drivers/remoteproc/tee_remoteproc.c b/drivers/remoteproc/tee_remoteproc.c
> >> new file mode 100644
> >> index 000000000000..9455fd9d0d2d
> >> --- /dev/null
> >> +++ b/drivers/remoteproc/tee_remoteproc.c
> >> @@ -0,0 +1,451 @@
> >> +// SPDX-License-Identifier: GPL-2.0-or-later
> >> +/*
> >> + * Copyright (C) STMicroelectronics 2024 - All Rights Reserved
> >> + * Author: Arnaud Pouliquen <arnaud.pouliquen@...s.st.com>
> >> + */
> >> +
> >> +#include <linux/firmware.h>
> >> +#include <linux/io.h>
> >> +#include <linux/module.h>
> >> +#include <linux/remoteproc.h>
> >> +#include <linux/slab.h>
> >> +#include <linux/tee_drv.h>
> >> +#include <linux/tee_remoteproc.h>
> >> +
> >> +#include "remoteproc_internal.h"
> >> +
> >> +#define MAX_TEE_PARAM_ARRY_MEMBER 4
> >> +
> >> +/*
> >> + * Authentication of the firmware and load in the remote processor memory
> >> + *
> >> + * [in] params[0].value.a: unique 32bit identifier of the remote processor
> >> + * [in] params[1].memref: buffer containing the image of the buffer
> >> + */
> >> +#define TA_RPROC_FW_CMD_LOAD_FW 1
> >> +
> >> +/*
> >> + * Start the remote processor
> >> + *
> >> + * [in] params[0].value.a: unique 32bit identifier of the remote processor
> >> + */
> >> +#define TA_RPROC_FW_CMD_START_FW 2
> >> +
> >> +/*
> >> + * Stop the remote processor
> >> + *
> >> + * [in] params[0].value.a: unique 32bit identifier of the remote processor
> >> + */
> >> +#define TA_RPROC_FW_CMD_STOP_FW 3
> >> +
> >> +/*
> >> + * Return the address of the resource table, or 0 if not found
> >> + * No check is done to verify that the address returned is accessible by
> >> + * the non secure context. If the resource table is loaded in a protected
> >> + * memory the access by the non secure context will lead to a data abort.
> >> + *
> >> + * [in] params[0].value.a: unique 32bit identifier of the remote processor
> >> + * [out] params[1].value.a: 32bit LSB resource table memory address
> >> + * [out] params[1].value.b: 32bit MSB resource table memory address
> >> + * [out] params[2].value.a: 32bit LSB resource table memory size
> >> + * [out] params[2].value.b: 32bit MSB resource table memory size
> >> + */
> >> +#define TA_RPROC_FW_CMD_GET_RSC_TABLE 4
> >> +
> >> +/*
> >> + * Return the address of the core dump
> >> + *
> >> + * [in] params[0].value.a: unique 32bit identifier of the remote processor
> >> + * [out] params[1].memref: address of the core dump image if exist,
> >> + * else return Null
> >> + */
> >> +#define TA_RPROC_FW_CMD_GET_COREDUMP 5
> >> +
> >> +struct tee_rproc_context {
> >> + struct list_head sessions;
> >> + struct tee_context *tee_ctx;
> >> + struct device *dev;
> >> +};
> >> +
> >> +static struct tee_rproc_context *tee_rproc_ctx;
> >> +
> >> +static void tee_rproc_prepare_args(struct tee_rproc *trproc, int cmd,
> >> + struct tee_ioctl_invoke_arg *arg,
> >> + struct tee_param *param,
> >> + unsigned int num_params)
> >> +{
> >> + memset(arg, 0, sizeof(*arg));
> >> + memset(param, 0, MAX_TEE_PARAM_ARRY_MEMBER * sizeof(*param));
> >> +
> >> + arg->func = cmd;
> >> + arg->session = trproc->session_id;
> >> + arg->num_params = num_params + 1;
> >> +
> >> + param[0] = (struct tee_param) {
> >> + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT,
> >> + .u.value.a = trproc->rproc_id,
> >> + };
> >> +}
> >> +
> >> +int tee_rproc_load_fw(struct rproc *rproc, const struct firmware *fw)
> >> +{
> >> + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER];
> >> + struct tee_rproc *trproc = rproc->tee_interface;
> >> + struct tee_ioctl_invoke_arg arg;
> >> + struct tee_shm *fw_shm;
> >> + int ret;
> >> +
> >> + if (!trproc)
> >> + return -EINVAL;
> >> +
> >> + fw_shm = tee_shm_register_kernel_buf(tee_rproc_ctx->tee_ctx, (void *)fw->data, fw->size);
> >> + if (IS_ERR(fw_shm))
> >> + return PTR_ERR(fw_shm);
> >> +
> >> + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_LOAD_FW, &arg, param, 1);
> >> +
> >> + /* Provide the address of the firmware image */
> >> + param[1] = (struct tee_param) {
> >> + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT,
> >> + .u.memref = {
> >> + .shm = fw_shm,
> >> + .size = fw->size,
> >> + .shm_offs = 0,
> >> + },
> >> + };
> >> +
> >> + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param);
> >> + if (ret < 0 || arg.ret != 0) {
> >> + dev_err(tee_rproc_ctx->dev,
> >> + "TA_RPROC_FW_CMD_LOAD_FW invoke failed TEE err: %x, ret:%x\n",
> >> + arg.ret, ret);
> >> + if (!ret)
> >> + ret = -EIO;
> >> + }
> >> +
> >> + tee_shm_free(fw_shm);
> >> +
> >> + return ret;
> >> +}
> >> +EXPORT_SYMBOL_GPL(tee_rproc_load_fw);
> >> +
> >> +static int tee_rproc_get_loaded_rsc_table(struct rproc *rproc, phys_addr_t *rsc_pa,
> >> + size_t *table_sz)
> >> +{
> >> + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER];
> >> + struct tee_rproc *trproc = rproc->tee_interface;
> >> + struct tee_ioctl_invoke_arg arg;
> >> + int ret;
> >> +
> >> + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_GET_RSC_TABLE, &arg, param, 2);
> >> +
> >> + param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT;
> >> + param[2].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT;
> >> +
> >> + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param);
> >> + if (ret < 0 || arg.ret != 0) {
> >> + dev_err(tee_rproc_ctx->dev,
> >> + "TA_RPROC_FW_CMD_GET_RSC_TABLE invoke failed TEE err: %x, ret:%x\n",
> >> + arg.ret, ret);
> >> + return -EIO;
> >> + }
> >> +
> >> + *table_sz = param[2].u.value.a;
> >> +
> >> + if (*table_sz)
> >> + *rsc_pa = param[1].u.value.a;
> >> + else
> >> + *rsc_pa = 0;
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +int tee_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw)
> >> +{
> >> + phys_addr_t rsc_table;
> >> + void __iomem *rsc_va;
> >> + size_t table_sz;
> >> + int ret;
> >> +
> >> + ret = tee_rproc_load_fw(rproc, fw);
> >> + if (ret)
> >> + return ret;
> >> +
> >> + ret = tee_rproc_get_loaded_rsc_table(rproc, &rsc_table, &table_sz);
> >> + if (ret)
> >> + return ret;
> >> +
> >> + /*
> >> + * We assume here that the memory mapping is the same between the TEE and Linux kernel
> >> + * contexts. Else a new TEE remoteproc service could be needed to get a copy of the
> >> + * resource table
> >> + */
> >> + rsc_va = ioremap_wc(rsc_table, table_sz);
> >> + if (IS_ERR_OR_NULL(rsc_va)) {
> >> + dev_err(tee_rproc_ctx->dev, "Unable to map memory region: %pa+%zx\n",
> >> + &rsc_table, table_sz);
> >> + return -ENOMEM;
> >> + }
> >> +
> >> + /*
> >> + * Create a copy of the resource table to have the same behavior as the elf loader.
> >> + * This cached table will be used after the remoteproc stops to free resources, and for
> >> + * crash recovery to reapply the settings.
> >> + */
> >> + rproc->cached_table = kmemdup((__force void *)rsc_va, table_sz, GFP_KERNEL);
> >> + if (!rproc->cached_table) {
> >> + ret = -ENOMEM;
> >> + goto out;
> >> + }
> >> +
> >> + rproc->table_ptr = rproc->cached_table;
> >> + rproc->table_sz = table_sz;
> >> +
> >> +out:
> >> + iounmap(rsc_va);
> >> + return ret;
> >> +}
> >> +EXPORT_SYMBOL_GPL(tee_rproc_parse_fw);
> >> +
> >> +struct resource_table *tee_rproc_find_loaded_rsc_table(struct rproc *rproc,
> >> + const struct firmware *fw)
> >> +{
> >> + struct tee_rproc *trproc = rproc->tee_interface;
> >> + phys_addr_t rsc_table;
> >> + size_t table_sz;
> >> + int ret;
> >> +
> >> + if (!trproc)
> >> + return ERR_PTR(-EINVAL);
> >> +
> >> + ret = tee_rproc_get_loaded_rsc_table(rproc, &rsc_table, &table_sz);
> >> + if (ret)
> >> + return ERR_PTR(ret);
> >> +
> >> + rproc->table_sz = table_sz;
> >> + if (!table_sz)
> >> + return NULL;
> >> +
> >> + /*
> >> + * At this step the memory area that contains the resource table should have be declared
> >> + * in the remote proc platform driver and allocated by rproc_alloc_registered_carveouts().
> >> + */
> >> +
> >> + return (struct resource_table *)rproc_pa_to_va(rproc, rsc_table, table_sz, NULL);
> >> +}
> >> +EXPORT_SYMBOL_GPL(tee_rproc_find_loaded_rsc_table);
> >> +
> >> +int tee_rproc_start(struct rproc *rproc)
> >> +{
> >> + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER];
> >> + struct tee_rproc *trproc = rproc->tee_interface;
> >> + struct tee_ioctl_invoke_arg arg;
> >> + int ret = 0;
> >> +
> >> + if (!trproc)
> >> + return -EINVAL;
> >> +
> >> + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_START_FW, &arg, param, 0);
> >> +
> >> + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param);
> >> + if (ret < 0 || arg.ret != 0) {
> >> + dev_err(tee_rproc_ctx->dev,
> >> + "TA_RPROC_FW_CMD_START_FW invoke failed TEE err: %x, ret:%x\n",
> >> + arg.ret, ret);
> >> + if (!ret)
> >> + return -EIO;
> >> + }
> >> +
> >> + return 0;
> >> +}
> >> +EXPORT_SYMBOL_GPL(tee_rproc_start);
> >> +
> >> +int tee_rproc_stop(struct rproc *rproc)
> >> +{
> >> + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER];
> >> + struct tee_rproc *trproc = rproc->tee_interface;
> >> + struct tee_ioctl_invoke_arg arg;
> >> + int ret;
> >> +
> >> + if (!trproc)
> >> + return -EINVAL;
> >> +
> >> + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_STOP_FW, &arg, param, 0);
> >> +
> >> + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param);
> >> + if (ret < 0 || arg.ret != 0) {
> >> + dev_err(tee_rproc_ctx->dev,
> >> + "TA_RPROC_FW_CMD_STOP_FW invoke failed TEE err: %x, ret:%x\n",
> >> + arg.ret, ret);
> >> + if (!ret)
> >> + ret = -EIO;
> >> + }
> >> +
> >> + return ret;
> >> +}
> >> +EXPORT_SYMBOL_GPL(tee_rproc_stop);
> >> +
> >> +static const struct tee_client_device_id stm32_tee_rproc_id_table[] = {
> >> + {UUID_INIT(0x80a4c275, 0x0a47, 0x4905,
> >> + 0x82, 0x85, 0x14, 0x86, 0xa9, 0x77, 0x1a, 0x08)},
> >> + {}
> >> +};
> >> +
> >> +struct tee_rproc *tee_rproc_register(struct device *dev, struct rproc *rproc, unsigned int rproc_id)
> >> +{
> >> + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER];
> >> + struct tee_ioctl_open_session_arg sess_arg;
> >> + struct tee_client_device *tee_device;
> >> + struct tee_rproc *trproc, *p_err;
> >> + int ret;
> >> +
> >> + /*
> >> + * Test if the device has been probed by the TEE bus. In case of failure, we ignore the
> >> + * reason. The bus could be not yet probed or the service not available in the secure
> >> + * firmware.The assumption in such a case is that the TEE remoteproc is not probed.
> >> + */
> >> + if (!tee_rproc_ctx)
> >> + return ERR_PTR(-EPROBE_DEFER);
> >> +
> >> + /* Prevent tee rproc module from being removed */
> >> + if (!try_module_get(THIS_MODULE)) {
> >> + dev_err(tee_rproc_ctx->dev, "can't get owner\n");
> >> + p_err = ERR_PTR(-ENODEV);
> >> + goto module_put;
> >> + }
> >> +
> >> + trproc = devm_kzalloc(dev, sizeof(*trproc), GFP_KERNEL);
> >> + if (!trproc) {
> >> + p_err = ERR_PTR(-ENOMEM);
> >> + goto module_put;
> >> + }
> >> + tee_device = to_tee_client_device(tee_rproc_ctx->dev);
> >> + memset(&sess_arg, 0, sizeof(sess_arg));
> >> +
> >> + memcpy(sess_arg.uuid, tee_device->id.uuid.b, TEE_IOCTL_UUID_LEN);
> >> +
> >> + sess_arg.clnt_login = TEE_IOCTL_LOGIN_REE_KERNEL;
> >> + sess_arg.num_params = 1;
> >> +
> >> + param[0] = (struct tee_param) {
> >> + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT,
> >> + .u.value.a = rproc_id,
> >> + };
> >> +
> >> + ret = tee_client_open_session(tee_rproc_ctx->tee_ctx, &sess_arg, param);
> >> + if (ret < 0 || sess_arg.ret != 0) {
> >> + dev_err(dev, "tee_client_open_session failed, err: %x\n", sess_arg.ret);
> >> + p_err = ERR_PTR(-EINVAL);
> >> + goto module_put;
> >> + }
> >> +
> >> + trproc->parent = dev;
> >> + trproc->rproc_id = rproc_id;
> >> + trproc->session_id = sess_arg.session;
> >> +
> >> + trproc->rproc = rproc;
> >> + rproc->tee_interface = trproc;
> >> +
> >> + list_add_tail(&trproc->node, &tee_rproc_ctx->sessions);
> >> +
> >> + return trproc;
> >> +
> >> +module_put:
> >> + module_put(THIS_MODULE);
> >> + return p_err;
> >> +}
> >> +EXPORT_SYMBOL_GPL(tee_rproc_register);
> >> +
> >> +int tee_rproc_unregister(struct tee_rproc *trproc)
> >> +{
> >> + struct rproc *rproc = trproc->rproc;
> >> + int ret;
> >> +
> >> + ret = tee_client_close_session(tee_rproc_ctx->tee_ctx, trproc->session_id);
> >> + if (ret < 0)
> >> + dev_err(trproc->parent, "tee_client_close_session failed, err: %x\n", ret);
> >> +
> >> + list_del(&trproc->node);
> >> + rproc->tee_interface = NULL;
> >> +
> >> + module_put(THIS_MODULE);
> >> +
> >> + return ret;
> >> +}
> >> +EXPORT_SYMBOL_GPL(tee_rproc_unregister);
> >> +
> >> +static int tee_rproc_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
> >> +{
> >> + /* Today we support only the OP-TEE, could be extend to other tees */
> >> + return (ver->impl_id == TEE_IMPL_ID_OPTEE);
> >> +}
> >> +
> >> +static int tee_rproc_probe(struct device *dev)
> >> +{
> >> + struct tee_context *tee_ctx;
> >> + int ret;
> >> +
> >> + /* Open context with TEE driver */
> >> + tee_ctx = tee_client_open_context(NULL, tee_rproc_ctx_match, NULL, NULL);
> >> + if (IS_ERR(tee_ctx))
> >> + return PTR_ERR(tee_ctx);
> >> +
> >> + tee_rproc_ctx = devm_kzalloc(dev, sizeof(*tee_ctx), GFP_KERNEL);
> >
> > I started reviewing this set - aside from the above allocation that isn't right,
> > I am definitely not sure about ops::pa_to_va(). There is a patchset from TI on
> > the mailing list [1] that also needs to translate addresses only accessible to
> > the remote processor and they simply enhanced their ops::da_to_va(). Perhaps
> > I'll find an answer as I continue to review this set...
>
>
> The DA to PA conversion is handled by OP-TEE when loading the firmware.
> Therefore, I have assumed that Linux could not know how to convert from DA to
> PA. This question is also relevant for the "attach" use case, I guess.
>
> If we consider that the DA to VA conversion should always be supported by the
> remoteproc driver, we would need to obtain the DA from OP-TEE.
>
> The impact would be to update the TA_RPROC_FW_CMD_GET_RSC_TABLE API to also
> return the DA. This would require changes in the OP-TEE code by adding a new
> output parameter to retrieve the DA.
I don't like all the alternate solutions to rproc_pa_to_va() that I come up with
so let's keep it for now.
>
> Thanks,
> Arnaud
>
>
> >
> > [1]. [PATCH v10 0/8] TI K3 M4F support on AM62 and AM64 SoCs
> >
> >> + if (!tee_rproc_ctx) {
> >> + ret = -ENOMEM;
> >> + goto err;
> >> + }
> >> +
> >> + tee_rproc_ctx->dev = dev;
> >> + tee_rproc_ctx->tee_ctx = tee_ctx;
> >> + INIT_LIST_HEAD(&tee_rproc_ctx->sessions);
> >> +
> >> + return 0;
> >> +err:
> >> + tee_client_close_context(tee_ctx);
> >> +
> >> + return ret;
> >> +}
> >> +
> >> +static int tee_rproc_remove(struct device *dev)
> >> +{
> >> + struct tee_rproc *entry, *tmp;
> >> +
> >> + list_for_each_entry_safe(entry, tmp, &tee_rproc_ctx->sessions, node) {
> >> + tee_client_close_session(tee_rproc_ctx->tee_ctx, entry->session_id);
> >> + list_del(&entry->node);
> >> + kfree(entry);
> >> + }
> >> +
> >> + tee_client_close_context(tee_rproc_ctx->tee_ctx);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +MODULE_DEVICE_TABLE(tee, stm32_tee_rproc_id_table);
> >> +
> >> +static struct tee_client_driver tee_rproc_fw_driver = {
> >> + .id_table = stm32_tee_rproc_id_table,
> >> + .driver = {
> >> + .name = KBUILD_MODNAME,
> >> + .bus = &tee_bus_type,
> >> + .probe = tee_rproc_probe,
> >> + .remove = tee_rproc_remove,
> >> + },
> >> +};
> >> +
> >> +static int __init tee_rproc_fw_mod_init(void)
> >> +{
> >> + return driver_register(&tee_rproc_fw_driver.driver);
> >> +}
> >> +
> >> +static void __exit tee_rproc_fw_mod_exit(void)
> >> +{
> >> + driver_unregister(&tee_rproc_fw_driver.driver);
> >> +}
> >> +
> >> +module_init(tee_rproc_fw_mod_init);
> >> +module_exit(tee_rproc_fw_mod_exit);
> >> +
> >> +MODULE_DESCRIPTION(" TEE remote processor control driver");
> >> +MODULE_LICENSE("GPL");
> >> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
> >> index 28aa62a3b505..6168f778414f 100644
> >> --- a/include/linux/remoteproc.h
> >> +++ b/include/linux/remoteproc.h
> >> @@ -505,6 +505,8 @@ enum rproc_features {
> >> RPROC_MAX_FEATURES,
> >> };
> >>
> >> +struct tee_rproc;
> >> +
> >> /**
> >> * struct rproc - represents a physical remote processor device
> >> * @node: list node of this rproc object
> >> @@ -547,6 +549,7 @@ enum rproc_features {
> >> * @cdev: character device of the rproc
> >> * @cdev_put_on_release: flag to indicate if remoteproc should be shutdown on @char_dev release
> >> * @features: indicate remoteproc features
> >> + * @tee_interface: pointer to the remoteproc tee context
> >> */
> >> struct rproc {
> >> struct list_head node;
> >> @@ -588,6 +591,7 @@ struct rproc {
> >> struct cdev cdev;
> >> bool cdev_put_on_release;
> >> DECLARE_BITMAP(features, RPROC_MAX_FEATURES);
> >> + struct tee_rproc *tee_interface;
> >> };
> >>
> >> /**
> >> diff --git a/include/linux/tee_remoteproc.h b/include/linux/tee_remoteproc.h
> >> new file mode 100644
> >> index 000000000000..c9ae4f60e844
> >> --- /dev/null
> >> +++ b/include/linux/tee_remoteproc.h
> >> @@ -0,0 +1,100 @@
> >> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> >> +/*
> >> + * Copyright(c) 2024 STMicroelectronics - All Rights Reserved
> >> + */
> >> +
> >> +#ifndef TEE_REMOTEPROC_H
> >> +#define TEE_REMOTEPROC_H
> >> +
> >> +#include <linux/tee_drv.h>
> >> +#include <linux/firmware.h>
> >> +#include <linux/remoteproc.h>
> >> +
> >> +struct rproc;
> >> +
> >> +/**
> >> + * struct tee_rproc - TEE remoteproc structure
> >> + * @node: Reference in list
> >> + * @rproc: Remoteproc reference
> >> + * @parent: Parent device
> >> + * @rproc_id: Identifier of the target firmware
> >> + * @session_id: TEE session identifier
> >> + */
> >> +struct tee_rproc {
> >> + struct list_head node;
> >> + struct rproc *rproc;
> >> + struct device *parent;
> >> + u32 rproc_id;
> >> + u32 session_id;
> >> +};
> >> +
> >> +#if IS_REACHABLE(CONFIG_TEE_REMOTEPROC)
> >> +
> >> +struct tee_rproc *tee_rproc_register(struct device *dev, struct rproc *rproc,
> >> + unsigned int rproc_id);
> >> +int tee_rproc_unregister(struct tee_rproc *trproc);
> >> +int tee_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw);
> >> +int tee_rproc_load_fw(struct rproc *rproc, const struct firmware *fw);
> >> +struct resource_table *tee_rproc_find_loaded_rsc_table(struct rproc *rproc,
> >> + const struct firmware *fw);
> >> +int tee_rproc_start(struct rproc *rproc);
> >> +int tee_rproc_stop(struct rproc *rproc);
> >> +
> >> +#else
> >> +
> >> +static inline struct tee_rproc *tee_rproc_register(struct device *dev, struct rproc *rproc,
> >> + unsigned int rproc_id)
> >> +{
> >> + return ERR_PTR(-ENODEV);
> >> +}
> >> +
> >> +static int tee_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw)
> >> +{
> >> + /* This shouldn't be possible */
> >> + WARN_ON(1);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static inline int tee_rproc_unregister(struct tee_rproc *trproc)
> >> +{
> >> + /* This shouldn't be possible */
> >> + WARN_ON(1);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static inline int tee_rproc_load_fw(struct rproc *rproc, const struct firmware *fw)
> >> +{
> >> + /* This shouldn't be possible */
> >> + WARN_ON(1);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static inline int tee_rproc_start(struct rproc *rproc)
> >> +{
> >> + /* This shouldn't be possible */
> >> + WARN_ON(1);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static inline int tee_rproc_stop(struct rproc *rproc)
> >> +{
> >> + /* This shouldn't be possible */
> >> + WARN_ON(1);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static inline struct resource_table *
> >> +tee_rproc_find_loaded_rsc_table(struct rproc *rproc, const struct firmware *fw)
> >> +{
> >> + /* This shouldn't be possible */
> >> + WARN_ON(1);
> >> +
> >> + return NULL;
> >> +}
> >> +#endif /* CONFIG_TEE_REMOTEPROC */
> >> +#endif /* TEE_REMOTEPROC_H */
> >> --
> >> 2.25.1
> >>
Powered by blists - more mailing lists