| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240621-x1e80100-dts-thermal-v3-1-abd6f416b609@linaro.org>
Date: Fri, 21 Jun 2024 10:20:06 +0300
From: Abel Vesa <abel.vesa@...aro.org>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: Johan Hovold <johan@...nel.org>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Rajendra Nayak <quic_rjendra@...cinc.com>,
Abel Vesa <abel.vesa@...aro.org>
Subject: [PATCH v3] arm64: dts: qcom: x1e80100: Enable tsens and thermal
zone nodes
From: Rajendra Nayak <quic_rjendra@...cinc.com>
Add tsens and thermal zones nodes for x1e80100 SoC.
Signed-off-by: Rajendra Nayak <quic_rjendra@...cinc.com>
Signed-off-by: Abel Vesa <abel.vesa@...aro.org>
---
Changes in v3:
- Changed the upper-lower tsense interrupts to PDC.
- Renamed the 'bottom' thermal zones to 'btm' due to name lenght
limitation in thermal framework.
- Dropped the passive polling delay from zones where there are no
passsive trip points.
- Link to v2: https://lore.kernel.org/r/20240614-x1e80100-dts-thermal-v2-1-4d4f9effacc6@linaro.org
Changes in v2:
- Dropped the thermal engine nodes.
- Dropped comments from tsens nodes.
- Droppd the polling-delay entirely and polling-delay-passive where not
necessary.
- Added top/bottom location to all sensors (where applicable).
- Fixed trip points with duplicate values for same temp.
- Marked as critical the 125°C throughout all trip points.
- Link to v1: https://lore.kernel.org/r/20240527-x1e80100-dts-thermal-v1-1-ea13b8fa6ffc@linaro.org
---
arch/arm64/boot/dts/qcom/x1e80100.dtsi | 1214 ++++++++++++++++++++++++++++++++
1 file changed, 1214 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index 9944c654851e..09fd6c8e53bb 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -2505,6 +2505,66 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
};
};
+ tsens0: thermal-sensor@...1000 {
+ compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c271000 0 0x1000>,
+ <0 0x0c222000 0 0x1000>;
+
+ interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow",
+ "critical";
+
+ #qcom,sensors = <16>;
+
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: thermal-sensor@...2000 {
+ compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c272000 0 0x1000>,
+ <0 0x0c223000 0 0x1000>;
+
+ interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow",
+ "critical";
+
+ #qcom,sensors = <16>;
+
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens2: thermal-sensor@...3000 {
+ compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c273000 0 0x1000>,
+ <0 0x0c224000 0 0x1000>;
+
+ interrupts-extended = <&pdc 28 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow",
+ "critical";
+
+ #qcom,sensors = <16>;
+
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens3: thermal-sensor@...4000 {
+ compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c274000 0 0x1000>,
+ <0 0x0c225000 0 0x1000>;
+
+ interrupts-extended = <&pdc 29 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow",
+ "critical";
+
+ #qcom,sensors = <16>;
+
+ #thermal-sensor-cells = <1>;
+ };
+
usb_1_ss0_hsphy: phy@...000 {
compatible = "qcom,x1e80100-snps-eusb2-phy",
"qcom,sm8550-snps-eusb2-phy";
@@ -5469,4 +5529,1158 @@ timer {
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
};
+
+ thermal-zones {
+ aoss0-thermal {
+ thermal-sensors = <&tsens0 0>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ aoss0-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-0-top-thermal {
+ polling-delay-passive = <250>;
+
+ thermal-sensors = <&tsens0 1>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-0-btm-thermal {
+ polling-delay-passive = <250>;
+
+ thermal-sensors = <&tsens0 2>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-1-top-thermal {
+ polling-delay-passive = <250>;
+
+ thermal-sensors = <&tsens0 3>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-1-btm-thermal {
+ polling-delay-passive = <250>;
+
+ thermal-sensors = <&tsens0 4>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-2-top-thermal {
+ polling-delay-passive = <250>;
+
+ thermal-sensors = <&tsens0 5>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-2-btm-thermal {
+ polling-delay-passive = <250>;
+
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-3-top-thermal {
+ polling-delay-passive = <250>;
+
+ thermal-sensors = <&tsens0 7>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-3-btm-thermal {
+ polling-delay-passive = <250>;
+
+ thermal-sensors = <&tsens0 8>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss0-top-thermal {
+ thermal-sensors = <&tsens0 9>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpuss2-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss0-btm-thermal {
+ thermal-sensors = <&tsens0 10>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpuss2-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ mem-thermal {
+ thermal-sensors = <&tsens0 11>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ mem-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ video-thermal {
+ polling-delay-passive = <250>;
+
+ thermal-sensors = <&tsens0 12>;
+
+ trips {
+ trip-point0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ aoss1-thermal {
+ thermal-sensors = <&tsens1 0>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ aoss0-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-0-top-thermal {
+ polling-delay-passive = <250>;
+
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-0-btm-thermal {
+ polling-delay-passive = <250>;
+
+ thermal-sensors = <&tsens1 2>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-1-top-thermal {
+ polling-delay-passive = <250>;
+
+ thermal-sensors = <&tsens1 3>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-1-btm-thermal {
+ polling-delay-passive = <250>;
+
+ thermal-sensors = <&tsens1 4>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-2-top-thermal {
+ polling-delay-passive = <250>;
+
+ thermal-sensors = <&tsens1 5>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-2-btm-thermal {
+ polling-delay-passive = <250>;
+
+ thermal-sensors = <&tsens1 6>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-3-top-thermal {
+ polling-delay-passive = <250>;
+
+ thermal-sensors = <&tsens1 7>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-3-btm-thermal {
+ polling-delay-passive = <250>;
+
+ thermal-sensors = <&tsens1 8>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss1-top-thermal {
+ thermal-sensors = <&tsens1 9>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpuss2-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss1-btm-thermal {
+ thermal-sensors = <&tsens1 10>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpuss2-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ aoss2-thermal {
+ thermal-sensors = <&tsens2 0>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ aoss0-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-0-top-thermal {
+ polling-delay-passive = <250>;
+
+ thermal-sensors = <&tsens2 1>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-0-btm-thermal {
+ polling-delay-passive = <250>;
+
+ thermal-sensors = <&tsens2 2>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-1-top-thermal {
+ polling-delay-passive = <250>;
+
+ thermal-sensors = <&tsens2 3>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-1-btm-thermal {
+ polling-delay-passive = <250>;
+
+ thermal-sensors = <&tsens2 4>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-2-top-thermal {
+ polling-delay-passive = <250>;
+
+ thermal-sensors = <&tsens2 5>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-2-btm-thermal {
+ polling-delay-passive = <250>;
+
+ thermal-sensors = <&tsens2 6>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-3-top-thermal {
+ polling-delay-passive = <250>;
+
+ thermal-sensors = <&tsens2 7>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-3-btm-thermal {
+ polling-delay-passive = <250>;
+
+ thermal-sensors = <&tsens2 8>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss2-top-thermal {
+ thermal-sensors = <&tsens2 9>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpuss2-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss2-btm-thermal {
+ thermal-sensors = <&tsens2 10>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpuss2-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ aoss3-thermal {
+ thermal-sensors = <&tsens3 0>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ aoss0-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsp0-thermal {
+ thermal-sensors = <&tsens3 1>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ nsp0-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsp1-thermal {
+ thermal-sensors = <&tsens3 2>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ nsp1-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsp2-thermal {
+ thermal-sensors = <&tsens3 3>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ nsp2-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsp3-thermal {
+ thermal-sensors = <&tsens3 4>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ nsp3-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss-0-thermal {
+ polling-delay-passive = <10>;
+
+ thermal-sensors = <&tsens3 5>;
+
+ trips {
+ trip-point0 {
+ temperature = <85000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <90000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ trip-point2 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss-1-thermal {
+ polling-delay-passive = <10>;
+
+ thermal-sensors = <&tsens3 6>;
+
+ trips {
+ trip-point0 {
+ temperature = <85000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <90000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ trip-point2 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss-2-thermal {
+ polling-delay-passive = <10>;
+
+ thermal-sensors = <&tsens3 7>;
+
+ trips {
+ trip-point0 {
+ temperature = <85000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <90000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ trip-point2 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss-3-thermal {
+ polling-delay-passive = <10>;
+
+ thermal-sensors = <&tsens3 8>;
+
+ trips {
+ trip-point0 {
+ temperature = <85000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <90000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ trip-point2 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss-4-thermal {
+ polling-delay-passive = <10>;
+
+ thermal-sensors = <&tsens3 9>;
+
+ trips {
+ trip-point0 {
+ temperature = <85000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <90000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ trip-point2 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss-5-thermal {
+ polling-delay-passive = <10>;
+
+ thermal-sensors = <&tsens3 10>;
+
+ trips {
+ trip-point0 {
+ temperature = <85000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <90000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ trip-point2 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss-6-thermal {
+ polling-delay-passive = <10>;
+
+ thermal-sensors = <&tsens3 11>;
+
+ trips {
+ trip-point0 {
+ temperature = <85000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <90000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ trip-point2 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss-7-thermal {
+ polling-delay-passive = <10>;
+
+ thermal-sensors = <&tsens3 12>;
+
+ trips {
+ trip-point0 {
+ temperature = <85000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <90000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ trip-point2 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ camera0-thermal {
+ thermal-sensors = <&tsens3 13>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ camera0-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ camera1-thermal {
+ thermal-sensors = <&tsens3 14>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ camera0-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ };
};
---
base-commit: 2102cb0d050d34d50b9642a3a50861787527e922
change-id: 20240109-x1e80100-dts-thermal-47db566a60bc
Best regards,
--
Abel Vesa <abel.vesa@...aro.org>
Powered by blists - more mailing lists