[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID:
<SJ0PR03MB6343CB033C1005A36B102BF89BC92@SJ0PR03MB6343.namprd03.prod.outlook.com>
Date: Fri, 21 Jun 2024 10:44:12 +0000
From: "Agarwal, Utsav" <Utsav.Agarwal@...log.com>
To: "Hennerich, Michael" <Michael.Hennerich@...log.com>,
"dmitry.torokhov@...il.com" <dmitry.torokhov@...il.com>,
"linux-input@...r.kernel.org" <linux-input@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
CC: "Artamonovs, Arturs" <Arturs.Artamonovs@...log.com>,
"Bimpikas, Vasileios"
<Vasileios.Bimpikas@...log.com>
Subject: [PATCH] adp5588-keys: Support for dedicated gpio operation
From: UtsavAgarwalADI <utsav.agarwal@...log.com>
We have a SoC which uses ADP5587 exclusively as an I2C GPIO expander.
The current state of the driver for the ADP5588/87 only allows
partial I/O to be used as GPIO. This support was present before as a
separate gpio driver, which was dropped with the commit
5ddc896088b0 ("gpio: gpio-adp5588: drop the driver") since the
functionality was deemed to have been merged with adp5588-keys.
To restore this functionality, the "gpio-only" property allows
indicating if the device is to be used for GPIO only.
When specified, the driver skips relevant input device
checks/parsing and allows all GPINS to be registered as GPIO.
Signed-off-by: Utsav Agarwal <utsav.agarwal@...log.com>
---
drivers/input/keyboard/adp5588-keys.c | 30 ++++++++++++++++++++-------
1 file changed, 23 insertions(+), 7 deletions(-)
diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c
index 1b0279393df4..78770b2dfe1b 100644
--- a/drivers/input/keyboard/adp5588-keys.c
+++ b/drivers/input/keyboard/adp5588-keys.c
@@ -719,7 +719,7 @@ static int adp5588_probe(struct i2c_client *client)
struct input_dev *input;
struct gpio_desc *gpio;
unsigned int revid;
- int ret;
+ int ret, gpio_mode_only;
int error;
if (!i2c_check_functionality(client->adapter,
@@ -739,13 +739,17 @@ static int adp5588_probe(struct i2c_client *client)
kpad->client = client;
kpad->input = input;
- error = adp5588_fw_parse(kpad);
- if (error)
- return error;
+ gpio_mode_only = device_property_present(&client->dev, "gpio-only");
+ if (!gpio_mode_only) {
+ error = adp5588_fw_parse(kpad);
+ if (error)
+ return error;
- error = devm_regulator_get_enable(&client->dev, "vcc");
- if (error)
- return error;
+ error = devm_regulator_get_enable(&client->dev, "vcc");
+ if (error)
+ return error;
+
+ }
gpio = devm_gpiod_get_optional(&client->dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(gpio))
@@ -790,6 +794,11 @@ static int adp5588_probe(struct i2c_client *client)
if (error)
return error;
+ if (!client->irq && gpio_mode_only) {
+ dev_info(&client->dev, "Rev.%d, started as GPIO only\n", revid);
+ return 0;
+ }
+
error = devm_request_threaded_irq(&client->dev, client->irq,
adp5588_hard_irq, adp5588_thread_irq,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
@@ -800,6 +809,13 @@ static int adp5588_probe(struct i2c_client *client)
return error;
}
+
+ if (gpio_mode_only) {
+ dev_info(&client->dev, "Rev.%d irq %d, started as GPIO only\n",
+ revid, client->irq);
+ return 0;
+ }
+
dev_info(&client->dev, "Rev.%d keypad, irq %d\n", revid, client->irq);
return 0;
}
--
2.34.1
Powered by blists - more mailing lists