[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240628142809.2327824-1-Frank.Li@nxp.com>
Date: Fri, 28 Jun 2024 10:28:06 -0400
From: Frank Li <Frank.Li@....com>
To: Shawn Guo <shawnguo@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
linux-arm-kernel@...ts.infradead.org (moderated list:ARM/FREESCALE LAYERSCAPE ARM ARCHITECTURE),
devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS),
linux-kernel@...r.kernel.org (open list)
Cc: imx@...ts.linux.dev
Subject: [PATCH 1/3] arm64: dts: layerscape: rename aux-bus to bus
The node name 'aux-bus' is special word. It invokes dp-aux-bus.yaml binding
check. Simple change to 'bus' to fix below warning.
aux-bus: '#address-cells', '#size-cells', 'compatible', 'dma-ranges', 'ranges', 'sata@...0000', 'usb@...0000', 'usb@...0000', 'usb@...0000' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/display/dp-aux-bus.yaml#
Signed-off-by: Frank Li <Frank.Li@....com>
---
Sorry, I have not realized this issue was caused by aux-bus when rename
from aux_bus to aux-bus at previous patch.
https://lore.kernel.org/imx/20240626202533.2182846-11-Frank.Li@nxp.com/T/#u
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 17f4e31711209..b19a024525cbc 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -804,7 +804,7 @@ QORIQ_CLK_PLL_DIV(1)>,
QORIQ_CLK_PLL_DIV(1)>;
};
- aux_bus: aux-bus {
+ aux_bus: bus {
#address-cells = <2>;
#size-cells = <2>;
compatible = "simple-bus";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 200e52622f998..6e244dc4832d1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -715,7 +715,7 @@ QORIQ_CLK_PLL_DIV(2)>,
QORIQ_CLK_PLL_DIV(2)>;
};
- aux_bus: aux-bus {
+ aux_bus: bus {
#address-cells = <2>;
#size-cells = <2>;
compatible = "simple-bus";
--
2.34.1
Powered by blists - more mailing lists