| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240701083138.15891-3-antoniu.miclaus@analog.com>
Date: Mon, 1 Jul 2024 11:30:44 +0300
From: Antoniu Miclaus <antoniu.miclaus@...log.com>
To: Ramona Gradinariu <ramona.gradinariu@...log.com>,
Antoniu Miclaus
<antoniu.miclaus@...log.com>,
Lars-Peter Clausen <lars@...afoo.de>,
Michael
Hennerich <Michael.Hennerich@...log.com>,
Jonathan Cameron
<jic23@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski
<krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Jonathan Corbet
<corbet@....net>,
Matti Vaittinen <mazziesaccount@...il.com>,
Jun Yan
<jerrysteve1101@...il.com>,
Andy Shevchenko
<andriy.shevchenko@...ux.intel.com>,
Mehdi Djait <mehdi.djait.k@...il.com>,
Mario Limonciello <mario.limonciello@....com>,
<linux-iio@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-doc@...r.kernel.org>
Subject: [PATCH v4 3/3] docs: iio: add documentation for adxl380 driver
Add documentation for adxl380 driver which describes the driver
device files and shows how the user may use the ABI for various
scenarios (configuration, measurement, etc.).
Signed-off-by: Ramona Gradinariu <ramona.gradinariu@...log.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@...log.com>
---
changes in v4:
- drop marketing from description.
Documentation/iio/adxl380.rst | 233 ++++++++++++++++++++++++++++++++++
Documentation/iio/index.rst | 1 +
2 files changed, 234 insertions(+)
create mode 100644 Documentation/iio/adxl380.rst
diff --git a/Documentation/iio/adxl380.rst b/Documentation/iio/adxl380.rst
new file mode 100644
index 000000000000..376dee5fe1dd
--- /dev/null
+++ b/Documentation/iio/adxl380.rst
@@ -0,0 +1,233 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============
+ADXL380 driver
+===============
+
+This driver supports Analog Device's ADXL380/382 on SPI/I2C bus.
+
+1. Supported devices
+====================
+
+* `ADXL380 <https://www.analog.com/ADXL380>`_
+* `ADXL382 <https://www.analog.com/ADXL382>`_
+
+The ADXL380/ADXL382 is a low noise density, low power, 3-axis accelerometer with
+selectable measurement ranges. The ADXL380 supports the ±4 g, ±8 g, and ±16 g
+ranges, and the ADXL382 supports ±15 g, ±30 g, and ±60 g ranges.
+
+2. Device attributes
+====================
+
+Accelerometer measurements are always provided.
+
+Temperature data are also provided. This data can be used to monitor the
+internal system temperature or to improve the temperature stability of the
+device via calibration.
+
+Each IIO device, has a device folder under ``/sys/bus/iio/devices/iio:deviceX``,
+where X is the IIO index of the device. Under these folders reside a set of
+device files, depending on the characteristics and features of the hardware
+device in questions. These files are consistently generalized and documented in
+the IIO ABI documentation.
+
+The following tables show the adxl380 related device files, found in the
+specific device folder path ``/sys/bus/iio/devices/iio:deviceX``.
+
++---------------------------------------------------+----------------------------------------------------------+
+| 3-Axis Accelerometer related device files | Description |
++---------------------------------------------------+----------------------------------------------------------+
+| in_accel_scale | Scale for the accelerometer channels. |
++---------------------------------------------------+----------------------------------------------------------+
+| in_accel_filter_high_pass_3db_frequency | Low pass filter bandwidth. |
++---------------------------------------------------+----------------------------------------------------------+
+| in_accel_filter_high_pass_3db_frequency_available | Available low pass filter bandwidth configurations. |
++---------------------------------------------------+----------------------------------------------------------+
+| in_accel_filter_low_pass_3db_frequency | High pass filter bandwidth. |
++---------------------------------------------------+----------------------------------------------------------+
+| in_accel_filter_low_pass_3db_frequency_available | Available high pass filter bandwidth configurations. |
++---------------------------------------------------+----------------------------------------------------------+
+| in_accel_x_calibbias | Calibration offset for the X-axis accelerometer channel. |
++---------------------------------------------------+----------------------------------------------------------+
+| in_accel_x_raw | Raw X-axis accelerometer channel value. |
++---------------------------------------------------+----------------------------------------------------------+
+| in_accel_y_calibbias | y-axis acceleration offset correction |
++---------------------------------------------------+----------------------------------------------------------+
+| in_accel_y_raw | Raw Y-axis accelerometer channel value. |
++---------------------------------------------------+----------------------------------------------------------+
+| in_accel_z_calibbias | Calibration offset for the Z-axis accelerometer channel. |
++---------------------------------------------------+----------------------------------------------------------+
+| in_accel_z_raw | Raw Z-axis accelerometer channel value. |
++---------------------------------------------------+----------------------------------------------------------+
+
++----------------------------------+--------------------------------------------+
+| Temperature sensor related files | Description |
++----------------------------------+--------------------------------------------+
+| in_temp_raw | Raw temperature channel value. |
++----------------------------------+--------------------------------------------+
+| in_temp_offset | Offset for the temperature sensor channel. |
++----------------------------------+--------------------------------------------+
+| in_temp_scale | Scale for the temperature sensor channel. |
++----------------------------------+--------------------------------------------+
+
++------------------------------+----------------------------------------------+
+| Miscellaneous device files | Description |
++------------------------------+----------------------------------------------+
+| name | Name of the IIO device. |
++------------------------------+----------------------------------------------+
+| sampling_frequency | Currently selected sample rate. |
++------------------------------+----------------------------------------------+
+| sampling_frequency_available | Available sampling frequency configurations. |
++------------------------------+----------------------------------------------+
+
+Channels processed values
+-------------------------
+
+A channel value can be read from its _raw attribute. The value returned is the
+raw value as reported by the devices. To get the processed value of the channel,
+apply the following formula:
+
+.. code-block:: bash
+
+ processed value = (_raw + _offset) * _scale
+
+Where _offset and _scale are device attributes. If no _offset attribute is
+present, simply assume its value is 0.
+
+The adis16475 driver offers data for 2 types of channels, the table below shows
+the measurement units for the processed value, which are defined by the IIO
+framework:
+
++-------------------------------------+---------------------------+
+| Channel type | Measurement unit |
++-------------------------------------+---------------------------+
+| Acceleration on X, Y, and Z axis | Meters per Second squared |
++-------------------------------------+---------------------------+
+| Temperature | Millidegrees Celsius |
++-------------------------------------+---------------------------+
+
+Usage examples
+--------------
+
+Show device name:
+
+.. code-block:: bash
+
+ root:/sys/bus/iio/devices/iio:device0> cat name
+ adxl382
+
+Show accelerometer channels value:
+
+.. code-block:: bash
+
+ root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_raw
+ -1771
+ root:/sys/bus/iio/devices/iio:device0> cat in_accel_y_raw
+ 282
+ root:/sys/bus/iio/devices/iio:device0> cat in_accel_z_raw
+ -1523
+ root:/sys/bus/iio/devices/iio:device0> cat in_accel_scale
+ 0.004903325
+
+- X-axis acceleration = in_accel_x_raw * in_accel_scale = −8.683788575 m/s^2
+- Y-axis acceleration = in_accel_y_raw * in_accel_scale = 1.38273765 m/s^2
+- Z-axis acceleration = in_accel_z_raw * in_accel_scale = -7.467763975 m/s^2
+
+Set calibration offset for accelerometer channels:
+
+.. code-block:: bash
+
+ root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_calibbias
+ 0
+
+ root:/sys/bus/iio/devices/iio:device0> echo 50 > in_accel_x_calibbias
+ root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_calibbias
+ 50
+
+Set sampling frequency:
+
+.. code-block:: bash
+
+ root:/sys/bus/iio/devices/iio:device0> cat sampling_frequency
+ 16000
+ root:/sys/bus/iio/devices/iio:device0> cat sampling_frequency_available
+ 16000 32000 64000
+
+ root:/sys/bus/iio/devices/iio:device0> echo 32000 > sampling_frequency
+ root:/sys/bus/iio/devices/iio:device0> cat sampling_frequency
+ 32000
+
+Set low pass filter bandwidth for accelerometer channels:
+
+.. code-block:: bash
+
+ root:/sys/bus/iio/devices/iio:device0> cat in_accel_filter_low_pass_3db_frequency
+ 32000
+ root:/sys/bus/iio/devices/iio:device0> cat in_accel_filter_low_pass_3db_frequency_available
+ 32000 8000 4000 2000
+
+ root:/sys/bus/iio/devices/iio:device0> echo 2000 > in_accel_filter_low_pass_3db_frequency
+ root:/sys/bus/iio/devices/iio:device0> cat in_accel_filter_low_pass_3db_frequency
+ 2000
+
+3. Device buffers
+=================
+
+This driver supports IIO buffers.
+
+All devices support retrieving the raw acceleration and temperature measurements
+using buffers.
+
+Usage examples
+--------------
+
+Select channels for buffer read:
+
+.. code-block:: bash
+
+ root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_accel_x_en
+ root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_accel_y_en
+ root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_accel_z_en
+ root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_temp_en
+
+Set the number of samples to be stored in the buffer:
+
+.. code-block:: bash
+
+ root:/sys/bus/iio/devices/iio:device0> echo 10 > buffer/length
+
+Enable buffer readings:
+
+.. code-block:: bash
+
+ root:/sys/bus/iio/devices/iio:device0> echo 1 > buffer/enable
+
+Obtain buffered data:
+
+.. code-block:: bash
+
+ root:/sys/bus/iio/devices/iio:device0> hexdump -C /dev/iio\:device0
+ ...
+ 002bc300 f7 e7 00 a8 fb c5 24 80 f7 e7 01 04 fb d6 24 80 |......$.......$.|
+ 002bc310 f7 f9 00 ab fb dc 24 80 f7 c3 00 b8 fb e2 24 80 |......$.......$.|
+ 002bc320 f7 fb 00 bb fb d1 24 80 f7 b1 00 5f fb d1 24 80 |......$...._..$.|
+ 002bc330 f7 c4 00 c6 fb a6 24 80 f7 a6 00 68 fb f1 24 80 |......$....h..$.|
+ 002bc340 f7 b8 00 a3 fb e7 24 80 f7 9a 00 b1 fb af 24 80 |......$.......$.|
+ 002bc350 f7 b1 00 67 fb ee 24 80 f7 96 00 be fb 92 24 80 |...g..$.......$.|
+ 002bc360 f7 ab 00 7a fc 1b 24 80 f7 b6 00 ae fb 76 24 80 |...z..$......v$.|
+ 002bc370 f7 ce 00 a3 fc 02 24 80 f7 c0 00 be fb 8b 24 80 |......$.......$.|
+ 002bc380 f7 c3 00 93 fb d0 24 80 f7 ce 00 d8 fb c8 24 80 |......$.......$.|
+ 002bc390 f7 bd 00 c0 fb 82 24 80 f8 00 00 e8 fb db 24 80 |......$.......$.|
+ 002bc3a0 f7 d8 00 d3 fb b4 24 80 f8 0b 00 e5 fb c3 24 80 |......$.......$.|
+ 002bc3b0 f7 eb 00 c8 fb 92 24 80 f7 e7 00 ea fb cb 24 80 |......$.......$.|
+ 002bc3c0 f7 fd 00 cb fb 94 24 80 f7 e3 00 f2 fb b8 24 80 |......$.......$.|
+ ...
+
+See ``Documentation/iio/iio_devbuf.rst`` for more information about how buffered
+data is structured.
+
+4. IIO Interfacing Tools
+========================
+
+See ``Documentation/iio/iio_tools.rst`` for the description of the available IIO
+interfacing tools.
diff --git a/Documentation/iio/index.rst b/Documentation/iio/index.rst
index 4c13bfa2865c..1ce5b24d40aa 100644
--- a/Documentation/iio/index.rst
+++ b/Documentation/iio/index.rst
@@ -20,5 +20,6 @@ Industrial I/O Kernel Drivers
ad7944
adis16475
adis16480
+ adxl380
bno055
ep93xx_adc
--
2.45.2
Powered by blists - more mailing lists