[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <7mzxt3h3pohxczatfsvqxtxvptdy6ooq76mq7ylywzkqncjkvs@aap4wnoo6j3p>
Date: Tue, 2 Jul 2024 22:08:05 -0500
From: Bjorn Andersson <andersson@...nel.org>
To: Jagadeesh Kona <quic_jkona@...cinc.com>
Cc: Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, Stanimir Varbanov <stanimir.k.varbanov@...il.com>,
Vikash Garodia <quic_vgarodia@...cinc.com>, Bryan O'Donoghue <bryan.odonoghue@...aro.org>,
Mauro Carvalho Chehab <mchehab@...nel.org>, Ulf Hansson <ulf.hansson@...aro.org>,
"Rafael J . Wysocki" <rafael@...nel.org>, Kevin Hilman <khilman@...nel.org>, Pavel Machek <pavel@....cz>,
Len Brown <len.brown@...el.com>, Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>, Andy Gross <agross@...nel.org>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>, Abel Vesa <abel.vesa@...aro.org>, linux-pm@...r.kernel.org,
linux-media@...r.kernel.org, linux-arm-msm@...r.kernel.org, linux-clk@...r.kernel.org,
linux-kernel@...r.kernel.org, Taniya Das <quic_tdas@...cinc.com>,
Satya Priya Kakitapalli <quic_skakitap@...cinc.com>, Imran Shaik <quic_imrashai@...cinc.com>,
Ajit Pandey <quic_ajipan@...cinc.com>
Subject: Re: [PATCH V7 3/5] clk: qcom: gdsc: Add set and get hwmode callbacks
to switch GDSC mode
On Mon, Jun 24, 2024 at 10:18:07AM GMT, Jagadeesh Kona wrote:
> Some GDSC client drivers require the GDSC mode to be switched dynamically
> to HW mode at runtime to gain the power benefits. Typically such client
> drivers require the GDSC to be brought up in SW mode initially to enable
> the required dependent clocks and configure the hardware to proper state.
> Once initial hardware set up is done, they switch the GDSC to HW mode to
> save power. At the end of usecase, they switch the GDSC back to SW mode
> and disable the GDSC.
>
> Introduce HW_CTRL_TRIGGER flag to register the set_hwmode_dev and
> get_hwmode_dev callbacks for GDSC's whose respective client drivers
> require the GDSC mode to be switched dynamically at runtime using
> dev_pm_genpd_set_hwmode() API.
>
> Signed-off-by: Jagadeesh Kona <quic_jkona@...cinc.com>
> Signed-off-by: Abel Vesa <abel.vesa@...aro.org>
> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@...aro.org>
> Reviewed-by: Taniya Das <quic_tdas@...cinc.com>
Reviewed-by: Bjorn Andersson <andersson@...nel.org>
Regards,
Bjorn
> ---
> drivers/clk/qcom/gdsc.c | 41 +++++++++++++++++++++++++++++++++++++++++
> drivers/clk/qcom/gdsc.h | 1 +
> 2 files changed, 42 insertions(+)
>
> diff --git a/drivers/clk/qcom/gdsc.c b/drivers/clk/qcom/gdsc.c
> index df9618ab7eea..fa5fe4c2a2ee 100644
> --- a/drivers/clk/qcom/gdsc.c
> +++ b/drivers/clk/qcom/gdsc.c
> @@ -363,6 +363,43 @@ static int gdsc_disable(struct generic_pm_domain *domain)
> return 0;
> }
>
> +static int gdsc_set_hwmode(struct generic_pm_domain *domain, struct device *dev, bool mode)
> +{
> + struct gdsc *sc = domain_to_gdsc(domain);
> + int ret;
> +
> + ret = gdsc_hwctrl(sc, mode);
> + if (ret)
> + return ret;
> +
> + /*
> + * Wait for the GDSC to go through a power down and
> + * up cycle. If we poll the status register before the
> + * power cycle is finished we might read incorrect values.
> + */
> + udelay(1);
> +
> + /*
> + * When the GDSC is switched to HW mode, HW can disable the GDSC.
> + * When the GDSC is switched back to SW mode, the GDSC will be enabled
> + * again, hence we need to poll for GDSC to complete the power up.
> + */
> + if (!mode)
> + return gdsc_poll_status(sc, GDSC_ON);
> +
> + return 0;
> +}
> +
> +static bool gdsc_get_hwmode(struct generic_pm_domain *domain, struct device *dev)
> +{
> + struct gdsc *sc = domain_to_gdsc(domain);
> + u32 val;
> +
> + regmap_read(sc->regmap, sc->gdscr, &val);
> +
> + return !!(val & HW_CONTROL_MASK);
> +}
> +
> static int gdsc_init(struct gdsc *sc)
> {
> u32 mask, val;
> @@ -451,6 +488,10 @@ static int gdsc_init(struct gdsc *sc)
> sc->pd.power_off = gdsc_disable;
> if (!sc->pd.power_on)
> sc->pd.power_on = gdsc_enable;
> + if (sc->flags & HW_CTRL_TRIGGER) {
> + sc->pd.set_hwmode_dev = gdsc_set_hwmode;
> + sc->pd.get_hwmode_dev = gdsc_get_hwmode;
> + }
>
> ret = pm_genpd_init(&sc->pd, NULL, !on);
> if (ret)
> diff --git a/drivers/clk/qcom/gdsc.h b/drivers/clk/qcom/gdsc.h
> index 803512688336..1e2779b823d1 100644
> --- a/drivers/clk/qcom/gdsc.h
> +++ b/drivers/clk/qcom/gdsc.h
> @@ -67,6 +67,7 @@ struct gdsc {
> #define ALWAYS_ON BIT(6)
> #define RETAIN_FF_ENABLE BIT(7)
> #define NO_RET_PERIPH BIT(8)
> +#define HW_CTRL_TRIGGER BIT(9)
> struct reset_controller_dev *rcdev;
> unsigned int *resets;
> unsigned int reset_count;
> --
> 2.43.0
>
Powered by blists - more mailing lists