[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240704172942.lngit56pv4xewlc3@skbuf>
Date: Thu, 4 Jul 2024 20:29:42 +0300
From: Vladimir Oltean <olteanv@...il.com>
To: Christian Eggers <ceggers@...i.de>
Cc: Andrew Lunn <andrew@...n.ch>, Florian Fainelli <f.fainelli@...il.com>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Juergen Beisert <jbe@...gutronix.de>, Stefan Roese <sr@...x.de>,
Juergen Borleis <kernel@...gutronix.de>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH net 1/2] dsa: lan9303: Fix mapping between DSA port
number and PHY address
On Wed, Jul 03, 2024 at 04:57:17PM +0200, Christian Eggers wrote:
> The 'phy' parameter supplied to lan9303_phy_read/_write was sometimes a
> DSA port number and sometimes a PHY address. This isn't a problem as
> long as they are equal. But if the external phy_addr_sel_strap pin is
> wired to 'high', the PHY addresses change from 0-1-2 to 1-2-3 (CPU,
> slave0, slave1). In this case, lan9303_phy_read/_write must translate
> between DSA port numbers and the corresponding PHY address.
>
> Fixes: a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303")
> Signed-off-by: Christian Eggers <ceggers@...i.de>
> ---
Reviewed-by: Vladimir Oltean <olteanv@...il.com>
Powered by blists - more mailing lists