[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240704-adp5588_gpio_support-v7-3-e34eb7eba5ab@analog.com>
Date: Thu, 04 Jul 2024 14:03:55 +0100
From: Utsav Agarwal via B4 Relay <devnull+utsav.agarwal.analog.com@...nel.org>
To: Utsav Agarwal <utsav.agarwal@...log.com>,
Michael Hennerich <michael.hennerich@...log.com>,
Dmitry Torokhov <dmitry.torokhov@...il.com>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Nuno Sá <nuno.sa@...log.com>
Cc: linux-input@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Arturs Artamonovs <arturs.artamonovs@...log.com>,
Vasileios Bimpikas <vasileios.bimpikas@...log.com>,
Oliver Gaskell <oliver.gaskell@...log.com>
Subject: [PATCH v7 3/3] dt-bindings: input: Update dtbinding for adp5588
From: Utsav Agarwal <utsav.agarwal@...log.com>
Updating dt bindings for adp5588. Since the device can now function in a
purely gpio mode, the following keypad specific properties are now made
optional:
- interrupts
- keypad,num-rows
- keypad,num-columns
- linux,keymap
However the above properties are required to be specified when
configuring the device as a keypad, dependencies have been added
such that specifying either one would require the remaining as well.
Note that interrupts are optional, but required when the device has been
configured in keypad mode.
Signed-off-by: Utsav Agarwal <utsav.agarwal@...log.com>
---
.../devicetree/bindings/input/adi,adp5588.yaml | 46 +++++++++++++++++++---
1 file changed, 41 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/input/adi,adp5588.yaml b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
index 26ea66834ae2..481c37595ebb 100644
--- a/Documentation/devicetree/bindings/input/adi,adp5588.yaml
+++ b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
@@ -49,7 +49,10 @@ properties:
interrupt-controller:
description:
This property applies if either keypad,num-rows lower than 8 or
- keypad,num-columns lower than 10.
+ keypad,num-columns lower than 10. This property is optional if
+ keypad,num-rows or keypad,num-columns are not specified since the
+ device then acts as gpio only, during which interrupts may or may
+ not be utilized.
'#interrupt-cells':
const: 2
@@ -65,13 +68,28 @@ properties:
minItems: 1
maxItems: 2
+
+dependencies:
+ keypad,num-rows:
+ - linux,keymap
+ - keypad,num-columns
+ keypad,num-columns:
+ - linux,keymap
+ - keypad,num-rows
+ linux,keymap:
+ - keypad,num-rows
+ - keypad,num-columns
+
+if:
+ required:
+ - linux,keymap
+then:
+ required:
+ - interrupts
+
required:
- compatible
- reg
- - interrupts
- - keypad,num-rows
- - keypad,num-columns
- - linux,keymap
unevaluatedProperties: false
@@ -108,4 +126,22 @@ examples:
>;
};
};
+
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/input/input.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio@34 {
+ compatible = "adi,adp5588";
+ reg = <0x34>;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+ };
+
...
--
2.34.1
Powered by blists - more mailing lists