lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAHCN7xKE34WBgUjOaHQg4Z_+0LwYHoHy5jgFtdr-754CnW6qqA@mail.gmail.com>
Date: Mon, 8 Jul 2024 07:36:41 -0500
From: Adam Ford <aford173@...il.com>
To: dri-devel@...ts.freedesktop.org
Cc: aford@...conembedded.com, Liu Ying <victor.liu@....com>, 
	Dmitry Baryshkov <dmitry.baryshkov@...aro.org>, Andrzej Hajda <andrzej.hajda@...el.com>, 
	Neil Armstrong <neil.armstrong@...aro.org>, Robert Foss <rfoss@...nel.org>, 
	Laurent Pinchart <Laurent.pinchart@...asonboard.com>, Jonas Karlman <jonas@...boo.se>, 
	Jernej Skrabec <jernej.skrabec@...il.com>, 
	Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>, Maxime Ripard <mripard@...nel.org>, 
	Thomas Zimmermann <tzimmermann@...e.de>, David Airlie <airlied@...il.com>, Daniel Vetter <daniel@...ll.ch>, 
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH V3] drm/bridge: adv7511: Fix Intermittent EDID failures

On Sun, Jun 30, 2024 at 5:19 PM Adam Ford <aford173@...il.com> wrote:
>
> In the process of adding support for shared IRQ pins, a scenario
> was accidentally created where adv7511_irq_process returned
> prematurely causing the EDID to fail randomly.
>
> Since the interrupt handler is broken up into two main helper functions,
> update both of them to treat the helper functions as IRQ handlers. These
> IRQ routines process their respective tasks as before, but if they
> determine that actual work was done, mark the respective IRQ status
> accordingly, and delay the check until everything has been processed.
>
> This should guarantee the helper functions don't return prematurely
> while still returning proper values of either IRQ_HANDLED or IRQ_NONE.
>
> Reported-by: Liu Ying <victor.liu@....com>
> Fixes: f3d9683346d6 ("drm/bridge: adv7511: Allow IRQ to share GPIO pins")
> Signed-off-by: Adam Ford <aford173@...il.com>
> Tested-by: Liu Ying <victor.liu@....com> # i.MX8MP EVK ADV7535 EDID retrieval w/o IRQ
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>

Gentle nudge on this.  I was hoping it could be merged in the 6.10
window since it fixes a known regression, but  I know it's summer in
the northern hemisphere, and everyone is busy.

adam
> ---
> V3:  Remove unnecessary declaration of ret by evaluating the return
>      code of regmap_read directly.
>
> V2:  Fix uninitialized cec_status
>      Cut back a little on error handling to return either IRQ_NONE or
>      IRQ_HANDLED.
>
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h b/drivers/gpu/drm/bridge/adv7511/adv7511.h
> index ea271f62b214..ec0b7f3d889c 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
> @@ -401,7 +401,7 @@ struct adv7511 {
>
>  #ifdef CONFIG_DRM_I2C_ADV7511_CEC
>  int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511);
> -void adv7511_cec_irq_process(struct adv7511 *adv7511, unsigned int irq1);
> +int adv7511_cec_irq_process(struct adv7511 *adv7511, unsigned int irq1);
>  #else
>  static inline int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511)
>  {
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c b/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c
> index 44451a9658a3..2e9c88a2b5ed 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c
> @@ -119,7 +119,7 @@ static void adv7511_cec_rx(struct adv7511 *adv7511, int rx_buf)
>         cec_received_msg(adv7511->cec_adap, &msg);
>  }
>
> -void adv7511_cec_irq_process(struct adv7511 *adv7511, unsigned int irq1)
> +int adv7511_cec_irq_process(struct adv7511 *adv7511, unsigned int irq1)
>  {
>         unsigned int offset = adv7511->info->reg_cec_offset;
>         const u32 irq_tx_mask = ADV7511_INT1_CEC_TX_READY |
> @@ -131,16 +131,19 @@ void adv7511_cec_irq_process(struct adv7511 *adv7511, unsigned int irq1)
>         unsigned int rx_status;
>         int rx_order[3] = { -1, -1, -1 };
>         int i;
> +       int irq_status = IRQ_NONE;
>
> -       if (irq1 & irq_tx_mask)
> +       if (irq1 & irq_tx_mask) {
>                 adv_cec_tx_raw_status(adv7511, irq1);
> +               irq_status = IRQ_HANDLED;
> +       }
>
>         if (!(irq1 & irq_rx_mask))
> -               return;
> +               return irq_status;
>
>         if (regmap_read(adv7511->regmap_cec,
>                         ADV7511_REG_CEC_RX_STATUS + offset, &rx_status))
> -               return;
> +               return irq_status;
>
>         /*
>          * ADV7511_REG_CEC_RX_STATUS[5:0] contains the reception order of RX
> @@ -172,6 +175,8 @@ void adv7511_cec_irq_process(struct adv7511 *adv7511, unsigned int irq1)
>
>                 adv7511_cec_rx(adv7511, rx_buf);
>         }
> +
> +       return IRQ_HANDLED;
>  }
>
>  static int adv7511_cec_adap_enable(struct cec_adapter *adap, bool enable)
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> index 66ccb61e2a66..c8d2c4a157b2 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> @@ -469,6 +469,8 @@ static int adv7511_irq_process(struct adv7511 *adv7511, bool process_hpd)
>  {
>         unsigned int irq0, irq1;
>         int ret;
> +       int cec_status = IRQ_NONE;
> +       int irq_status = IRQ_NONE;
>
>         ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(0), &irq0);
>         if (ret < 0)
> @@ -478,29 +480,31 @@ static int adv7511_irq_process(struct adv7511 *adv7511, bool process_hpd)
>         if (ret < 0)
>                 return ret;
>
> -       /* If there is no IRQ to handle, exit indicating no IRQ data */
> -       if (!(irq0 & (ADV7511_INT0_HPD | ADV7511_INT0_EDID_READY)) &&
> -           !(irq1 & ADV7511_INT1_DDC_ERROR))
> -               return -ENODATA;
> -
>         regmap_write(adv7511->regmap, ADV7511_REG_INT(0), irq0);
>         regmap_write(adv7511->regmap, ADV7511_REG_INT(1), irq1);
>
> -       if (process_hpd && irq0 & ADV7511_INT0_HPD && adv7511->bridge.encoder)
> +       if (process_hpd && irq0 & ADV7511_INT0_HPD && adv7511->bridge.encoder) {
>                 schedule_work(&adv7511->hpd_work);
> +               irq_status = IRQ_HANDLED;
> +       }
>
>         if (irq0 & ADV7511_INT0_EDID_READY || irq1 & ADV7511_INT1_DDC_ERROR) {
>                 adv7511->edid_read = true;
>
>                 if (adv7511->i2c_main->irq)
>                         wake_up_all(&adv7511->wq);
> +               irq_status = IRQ_HANDLED;
>         }
>
>  #ifdef CONFIG_DRM_I2C_ADV7511_CEC
> -       adv7511_cec_irq_process(adv7511, irq1);
> +       cec_status = adv7511_cec_irq_process(adv7511, irq1);
>  #endif
>
> -       return 0;
> +       /* If there is no IRQ to handle, exit indicating no IRQ data */
> +       if (irq_status == IRQ_HANDLED || cec_status == IRQ_HANDLED)
> +               return IRQ_HANDLED;
> +
> +       return IRQ_NONE;
>  }
>
>  static irqreturn_t adv7511_irq_handler(int irq, void *devid)
> @@ -509,7 +513,7 @@ static irqreturn_t adv7511_irq_handler(int irq, void *devid)
>         int ret;
>
>         ret = adv7511_irq_process(adv7511, true);
> -       return ret < 0 ? IRQ_NONE : IRQ_HANDLED;
> +       return ret < 0 ? IRQ_NONE : ret;
>  }
>
>  /* -----------------------------------------------------------------------------
> --
> 2.43.0
>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ