[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CANAwSgQqCtURhjLJSmiN_5sJQVurcaSsDmb6uqN9jyry=w3yXA@mail.gmail.com>
Date: Thu, 11 Jul 2024 10:09:50 +0530
From: Anand Moon <linux.amoon@...il.com>
To: Jonas Karlman <jonas@...boo.se>
Cc: Heiko Stuebner <heiko@...ech.de>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-rockchip@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v1] arm64: dts: rockchip: Add missing pinctrl for PCIe30x4 node
Hi Jonas,
On Wed, 10 Jul 2024 at 22:04, Anand Moon <linux.amoon@...il.com> wrote:
>
> Hi Jonas,
>
> On Wed, 10 Jul 2024 at 20:11, Jonas Karlman <jonas@...boo.se> wrote:
> >
> > Hi Anand,
> >
> > On 2024-07-10 16:19, Anand Moon wrote:
> > > Add missing pinctrl settings for PCIe 3.0 x4 clock request and wake
> > > signals. Rename node from 'pcie3' to 'pcie30x4' to align with schematic
> > > nomenclature.
> > >
> > > Signed-off-by: Anand Moon <linux.amoon@...il.com>
> > > ---
> > > .../boot/dts/rockchip/rk3588-rock-5b.dts | 20 +++++++++++++------
> > > 1 file changed, 14 insertions(+), 6 deletions(-)
> > >
> > > diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
> > > index 2e7512676b7e..a9b55b7996cf 100644
> > > --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
> > > +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
> > > @@ -301,7 +301,7 @@ &pcie30phy {
> > >
> > > &pcie3x4 {
> > > pinctrl-names = "default";
> > > - pinctrl-0 = <&pcie3_rst>;
> > > + pinctrl-0 = <&pcie30x4_perstn_m1 &pcie30x4_clkreqn_m1 &pcie30x4_waken_m1>;
> > > reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
> > > vpcie3v3-supply = <&vcc3v3_pcie30>;
> > > status = "okay";
> > > @@ -340,14 +340,22 @@ pcie2_2_rst: pcie2-2-rst {
> > > };
> > > };
> > >
> > > - pcie3 {
> > > - pcie3_rst: pcie3-rst {
> > > - rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
> > > - };
> > > -
> > > + pcie30x4 {
> > > pcie3_vcc3v3_en: pcie3-vcc3v3-en {
> > > rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
> > > };
> > > +
> > > + pcie30x4_clkreqn_m1: pcie30x4-clkreqn-m1 {
> > > + rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
> > > + };
> > > +
> > > + pcie30x4_waken_m1: pcie30x4-waken-m1 {
> > > + rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
> > > + };
> >
> > Should these not be routed to the clkreqn_m1 and waken_m1 function
> > instead of gpio function?
> >
> > E.g. something like:
> >
> > pcie30x4m1_pins: pcie30x4m1-pins {
> > rockchip,pins =
> > <4 RK_PB4 4 &pcfg_pull_none>,
> > <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>,
> > <4 RK_PB5 4 &pcfg_pull_none>;
> > };
> >
> > There are other rk35xx boards where only the perstn pin is configured
> > and could use a similar fix.
> >
>
> I understand this grouping for Gpio, but I am not very familiar with
> this feature.
Already we have a group of this pincrtl in the pinctrl.dtsi,
I will use this in my patch.
[0] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi?h=v6.10-rc7#n1775
Thanks for the tip.
Thanks
-Anand
Powered by blists - more mailing lists