lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240712113200.2468249-2-wangshuaijie@awinic.com>
Date: Fri, 12 Jul 2024 11:31:59 +0000
From: wangshuaijie@...nic.com
To: jic23@...nel.org,
	lars@...afoo.de,
	robh@...nel.org,
	krzk+dt@...nel.org,
	conor+dt@...nel.org,
	waqar.hameed@...s.com,
	linux-iio@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org
Cc: wangshuaijie@...nic.com,
	liweilei@...nic.com,
	kangjiajun@...nic.com
Subject: [PATCH V3 1/2] dt-bindings: iio: Add YAML to Awinic proximity sensor

From: shuaijie wang <wangshuaijie@...nic.com>

Add the awinic,aw96xxx.yaml file to adapt to the awinic proximity sensor driver.
Addressing the issues raised in the previous version.
1. Add a description about the hardware device.
2. Remove inappropriate configuration items.
3. Modify the formatting issues.

Signed-off-by: shuaijie wang <wangshuaijie@...nic.com>
---
 .../iio/proximity/awinic,aw96xxx.yaml         | 127 ++++++++++++++++++
 1 file changed, 127 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/proximity/awinic,aw96xxx.yaml

diff --git a/Documentation/devicetree/bindings/iio/proximity/awinic,aw96xxx.yaml b/Documentation/devicetree/bindings/iio/proximity/awinic,aw96xxx.yaml
new file mode 100644
index 000000000000..459cb1644d3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/awinic,aw96xxx.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/awinic,aw96xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Awinic's AW96XXX capacitive proximity sensor
+
+maintainers:
+  - Shuaijie Wang <wangshuaijie@...nic.com>
+
+description: |
+  Awinic's AW96XXX proximity sensor.
+  The specific absorption rate (SAR) is a metric that measures
+  the degree of absorption of electromagnetic radiation emitted by wireless
+  devices, such as mobile phones and tablets, by human tissue.
+  In mobile phone applications, the proximity sensor is primarily used to detect
+  the proximity of the human body to the phone. When the phone approaches the human body,
+  it will actively reduce the transmit power of the antenna to keep the SAR within a safe
+  range. Therefore, we also refer to the proximity sensor as a SAR sensor.
+
+properties:
+  compatible:
+    enum:
+      - awinic,aw96103
+      - awinic,aw96105
+      - awinic,aw96303
+      - awinic,aw96305
+      - awinic,aw96308
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Generated by the device to announce that a close/far
+      proximity event has happened.
+    maxItems: 1
+
+  awinic,sar-num:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Set the number of the SAR(Specific Absorption Rate) sensor.
+      It is set to 0 if one awinic sar chip is used.
+      If two awinic sar chips are used, awinic,sar-label in the first
+      awinic-sar should be set to 0 and awinic,sar-label in the second
+      awinic-sar should be set to 1.
+      In an application where a device utilizes multiple proximity sensors,
+      it is used to retrieve the names of the register configuration files
+      that the drivers need to load. For example: aw963xx_reg_0.bin/aw963xx_reg_1.bin
+
+  awinic,regulator-power-supply:
+    description:
+      Choose if you want to use a regulator to power the chip. Then the
+      vccX-supply has to be set.
+
+  vcc0-supply:
+    description:
+      Optional regulator for chip, 1.7V-3.6V.
+      If two awinic sar chips are used, the first regulator
+      should set the ID to vcc0-supply and the second regulator
+      should set the ID to vcc1-supply.
+
+  awinic,channel-use-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The mask of channels used.
+      Configure according to the specific chip channel used.
+      Bit[31:0] Each bit represents a channel.
+      If the customer uses ch0 and ch2, then channel_use_mask=<0x05>
+      For a 3-channel chip, the maximum value is 0x07;
+      For a 5-channel chip, the maximum value is 0x1F;
+      For a 8-channel chip, the maximum value is 0xFF;
+
+  awinic,monitor-esd:
+    type: boolean
+    description:
+      Choose if you want to monitor ESD.
+
+  awinic,pin-set-inter-pull-up:
+    type: boolean
+    description:
+      Choose if you want to set the interrupt pin to internal pull-up.
+
+  awinic,using-pm-ops:
+    type: boolean
+    description:
+      Choose if you want to change the chip mode on suppend and resume.
+
+  awinic,use-plug-cail:
+    type: boolean
+    description:
+      Choose If you want to perform calibration when plugging and unplugging the charger.
+
+  awinic,irq-mux:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [2, 5]
+    description:
+      You only need to set this configuration item if you are using AW96308 adn AW96305BFOR.
+      If CS2 is used as the interrupt pin, this item should be set to 2.
+      If CS5 is used as the interrupt pin, this item should be set to 5.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - awinic,sar-num
+  - awinic,channel-use-mask
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        proximity@12 {
+            compatible = "awinic,aw96308";
+            reg = <0x12>;
+            interrupt-parent = <&gpio>;
+            interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+            awinic,sar-num = <0>;
+            awinic,channel-use-mask = <0xff>;
+            awinic,irq-mux = <2>;
+        };
+    };
-- 
2.45.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ