lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <c466de06-cbc3-4ce7-90fe-4decc6e0fb89@kernel.org>
Date: Fri, 12 Jul 2024 13:55:09 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: wangshuaijie@...nic.com, jic23@...nel.org, lars@...afoo.de,
 robh@...nel.org, krzk+dt@...nel.org, conor+dt@...nel.org,
 waqar.hameed@...s.com, linux-iio@...r.kernel.org,
 devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: liweilei@...nic.com, kangjiajun@...nic.com
Subject: Re: [PATCH V3 1/2] dt-bindings: iio: Add YAML to Awinic proximity
 sensor

On 12/07/2024 13:31, wangshuaijie@...nic.com wrote:
> From: shuaijie wang <wangshuaijie@...nic.com>
> 
> Add the awinic,aw96xxx.yaml file to adapt to the awinic proximity sensor driver.
> Addressing the issues raised in the previous version.
> 1. Add a description about the hardware device.
> 2. Remove inappropriate configuration items.
> 3. Modify the formatting issues.

That's commit msg or changelog? Don't mix both. Read submitting patches.

> 
> Signed-off-by: shuaijie wang <wangshuaijie@...nic.com>
> ---
>  .../iio/proximity/awinic,aw96xxx.yaml         | 127 ++++++++++++++++++
>  1 file changed, 127 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/proximity/awinic,aw96xxx.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/proximity/awinic,aw96xxx.yaml b/Documentation/devicetree/bindings/iio/proximity/awinic,aw96xxx.yaml
> new file mode 100644
> index 000000000000..459cb1644d3c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/proximity/awinic,aw96xxx.yaml
> @@ -0,0 +1,127 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/input/awinic,aw96xxx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Awinic's AW96XXX capacitive proximity sensor
> +
> +maintainers:
> +  - Shuaijie Wang <wangshuaijie@...nic.com>
> +
> +description: |
> +  Awinic's AW96XXX proximity sensor.
> +  The specific absorption rate (SAR) is a metric that measures
> +  the degree of absorption of electromagnetic radiation emitted by wireless
> +  devices, such as mobile phones and tablets, by human tissue.
> +  In mobile phone applications, the proximity sensor is primarily used to detect
> +  the proximity of the human body to the phone. When the phone approaches the human body,
> +  it will actively reduce the transmit power of the antenna to keep the SAR within a safe
> +  range. Therefore, we also refer to the proximity sensor as a SAR sensor.

Wrap at 80 (see Coding style).

> +
> +properties:
> +  compatible:
> +    enum:
> +      - awinic,aw96103
> +      - awinic,aw96105
> +      - awinic,aw96303
> +      - awinic,aw96305
> +      - awinic,aw96308
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    description:
> +      Generated by the device to announce that a close/far
> +      proximity event has happened.
> +    maxItems: 1
> +
> +  awinic,sar-num:

Drop the property. I already asked.

> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      Set the number of the SAR(Specific Absorption Rate) sensor.
> +      It is set to 0 if one awinic sar chip is used.
> +      If two awinic sar chips are used, awinic,sar-label in the first
> +      awinic-sar should be set to 0 and awinic,sar-label in the second
> +      awinic-sar should be set to 1.
> +      In an application where a device utilizes multiple proximity sensors,
> +      it is used to retrieve the names of the register configuration files
> +      that the drivers need to load. For example: aw963xx_reg_0.bin/aw963xx_reg_1.bin
> +
> +  awinic,regulator-power-supply:

It does not look like you tested the bindings, at least after quick
look. Please run `make dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).
Maybe you need to update your dtschema and yamllint.

> +    description:
> +      Choose if you want to use a regulator to power the chip. Then the
> +      vccX-supply has to be set.
> +
> +  vcc0-supply:
> +    description:
> +      Optional regulator for chip, 1.7V-3.6V.
> +      If two awinic sar chips are used, the first regulator
> +      should set the ID to vcc0-supply and the second regulator
> +      should set the ID to vcc1-supply.
> +
> +  awinic,channel-use-mask:

Aren't there existing IIO properties like this?

> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      The mask of channels used.
> +      Configure according to the specific chip channel used.
> +      Bit[31:0] Each bit represents a channel.
> +      If the customer uses ch0 and ch2, then channel_use_mask=<0x05>
> +      For a 3-channel chip, the maximum value is 0x07;
> +      For a 5-channel chip, the maximum value is 0x1F;
> +      For a 8-channel chip, the maximum value is 0xFF;
> +
> +  awinic,monitor-esd:
> +    type: boolean
> +    description:
> +      Choose if you want to monitor ESD.

Why this is a choice? How does this describe hardware.

> +
> +  awinic,pin-set-inter-pull-up:
> +    type: boolean
> +    description:
> +      Choose if you want to set the interrupt pin to internal pull-up.
> +
> +  awinic,using-pm-ops:

NAK, drop all such OS policies.

> +    type: boolean
> +    description:
> +      Choose if you want to change the chip mode on suppend and resume.
> +
> +  awinic,use-plug-cail:> +    type: boolean
> +    description:
> +      Choose If you want to perform calibration when plugging and unplugging the charger.

And why this is board dependent?

> +
> +  awinic,irq-mux:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [2, 5]
> +    description:
> +      You only need to set this configuration item if you are using AW96308 adn AW96305BFOR.
> +      If CS2 is used as the interrupt pin, this item should be set to 2.
> +      If CS5 is used as the interrupt pin, this item should be set to 5.
> +


Best regards,
Krzysztof


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ