| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID:
<AS8PR04MB84500E870B3BBD1FD270609388A22@AS8PR04MB8450.eurprd04.prod.outlook.com>
Date: Tue, 16 Jul 2024 12:29:18 +0000
From: Peng Fan <peng.fan@....com>
To: Luke Parkin <luke.parkin@....com>, "linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>, "linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>, "arm-scmi@...r.kernel.org"
<arm-scmi@...r.kernel.org>
CC: "sudeep.holla@....com" <sudeep.holla@....com>, "cristian.marussi@....com"
<cristian.marussi@....com>
Subject: RE: [PATCH v3 3/5] firmware: arm_scmi: Track basic SCMI statistics
> Subject: [PATCH v3 3/5] firmware: arm_scmi: Track basic SCMI
> statistics
>
> Add tracking of initial statistics
>
> Signed-off-by: Luke Parkin <luke.parkin@....com>
Just wonder that since ftrace is there, why need this?
Thanks,
Peng.
> ---
> V2->V3
> Add more statistics
> Use new log_stats method.
> V1->V2
> Drop unneccesary atomic_set's
> Use new 'scmi_log_stats' to simplify incrementing of atomics Move
> scmi_log_stats to locations which mean no extra conditionals
> are needed
> ---
> drivers/firmware/arm_scmi/driver.c | 39
> ++++++++++++++++++++++++++----
> 1 file changed, 34 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/firmware/arm_scmi/driver.c
> b/drivers/firmware/arm_scmi/driver.c
> index 6edec6ec912d..b22f104cda36 100644
> --- a/drivers/firmware/arm_scmi/driver.c
> +++ b/drivers/firmware/arm_scmi/driver.c
> @@ -126,6 +126,20 @@ struct scmi_debug_info { };
>
> enum debug_stat_counters {
> + SENT_OK,
> + SENT_FAIL,
> + SENT_FAIL_POLLING_UNSUPPORTED,
> + SENT_FAIL_CHANNEL_NOT_FOUND,
> + RESPONSE_OK,
> + NOTIF_OK,
> + DLYD_RESPONSE_OK,
> + XFERS_RESPONSE_TIMEOUT,
> + XFERS_RESPONSE_POLLED_TIMEOUT,
> + RESPONSE_POLLED_OK,
> + ERR_MSG_UNEXPECTED,
> + ERR_MSG_INVALID,
> + ERR_MSG_NOMEM,
> + ERR_PROTOCOL,
> LAST
> };
>
> @@ -994,6 +1008,7 @@ scmi_xfer_command_acquire(struct
> scmi_chan_info *cinfo, u32 msg_hdr)
> spin_unlock_irqrestore(&minfo->xfer_lock, flags);
>
> scmi_bad_message_trace(cinfo, msg_hdr,
> MSG_UNEXPECTED);
> + scmi_log_stats(info->dbg_stats,
> ERR_MSG_UNEXPECTED);
>
> return xfer;
> }
> @@ -1021,6 +1036,8 @@ scmi_xfer_command_acquire(struct
> scmi_chan_info *cinfo, u32 msg_hdr)
> msg_type, xfer_id, msg_hdr, xfer->state);
>
> scmi_bad_message_trace(cinfo, msg_hdr,
> MSG_INVALID);
> + scmi_log_stats(info->dbg_stats, ERR_MSG_INVALID);
> +
>
> /* On error the refcount incremented above has to be
> dropped */
> __scmi_xfer_put(minfo, xfer);
> @@ -1060,6 +1077,7 @@ static void scmi_handle_notification(struct
> scmi_chan_info *cinfo,
> PTR_ERR(xfer));
>
> scmi_bad_message_trace(cinfo, msg_hdr,
> MSG_NOMEM);
> + scmi_log_stats(info->dbg_stats, ERR_MSG_NOMEM);
>
> scmi_clear_channel(info, cinfo);
> return;
> @@ -1075,6 +1093,7 @@ static void scmi_handle_notification(struct
> scmi_chan_info *cinfo,
> trace_scmi_msg_dump(info->id, cinfo->id, xfer-
> >hdr.protocol_id,
> xfer->hdr.id, "NOTI", xfer->hdr.seq,
> xfer->hdr.status, xfer->rx.buf, xfer->rx.len);
> + scmi_log_stats(info->dbg_stats, NOTIF_OK);
>
> scmi_notify(cinfo->handle, xfer->hdr.protocol_id,
> xfer->hdr.id, xfer->rx.buf, xfer->rx.len, ts); @@ -
> 1134,8 +1153,10 @@ static void scmi_handle_response(struct
> scmi_chan_info *cinfo,
> if (xfer->hdr.type == MSG_TYPE_DELAYED_RESP) {
> scmi_clear_channel(info, cinfo);
> complete(xfer->async_done);
> + scmi_log_stats(info->dbg_stats, DLYD_RESPONSE_OK);
> } else {
> complete(&xfer->done);
> + scmi_log_stats(info->dbg_stats, RESPONSE_OK);
> }
>
> if (IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT))
> { @@ -1219,6 +1240,7 @@ static int scmi_wait_for_reply(struct
> device *dev, const struct scmi_desc *desc,
> struct scmi_xfer *xfer, unsigned int
> timeout_ms) {
> int ret = 0;
> + struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
>
> if (xfer->hdr.poll_completion) {
> /*
> @@ -1239,13 +1261,12 @@ static int scmi_wait_for_reply(struct
> device *dev, const struct scmi_desc *desc,
> "timed out in
> resp(caller: %pS) - polling\n",
> (void *)_RET_IP_);
> ret = -ETIMEDOUT;
> + scmi_log_stats(info->dbg_stats,
> XFERS_RESPONSE_POLLED_TIMEOUT);
> }
> }
>
> if (!ret) {
> unsigned long flags;
> - struct scmi_info *info =
> - handle_to_scmi_info(cinfo->handle);
>
> /*
> * Do not fetch_response if an out-of-order
> delayed @@ -1265,6 +1286,7 @@ static int
> scmi_wait_for_reply(struct device *dev, const struct scmi_desc *desc,
> "RESP" : "resp",
> xfer->hdr.seq, xfer-
> >hdr.status,
> xfer->rx.buf, xfer->rx.len);
> + scmi_log_stats(info->dbg_stats,
> RESPONSE_POLLED_OK);
>
> if
> (IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT)) {
> scmi_raw_message_report(info->raw,
> xfer, @@ -1279,6 +1301,7 @@ static int scmi_wait_for_reply(struct
> device *dev, const struct scmi_desc *desc,
> dev_err(dev, "timed out in
> resp(caller: %pS)\n",
> (void *)_RET_IP_);
> ret = -ETIMEDOUT;
> + scmi_log_stats(info->dbg_stats,
> XFERS_RESPONSE_TIMEOUT);
> }
> }
>
> @@ -1362,13 +1385,15 @@ static int do_xfer(const struct
> scmi_protocol_handle *ph,
> !is_transport_polling_capable(info->desc)) {
> dev_warn_once(dev,
> "Polling mode is not supported by
> transport.\n");
> + scmi_log_stats(info->dbg_stats,
> SENT_FAIL_POLLING_UNSUPPORTED);
> return -EINVAL;
> }
>
> cinfo = idr_find(&info->tx_idr, pi->proto->id);
> - if (unlikely(!cinfo))
> + if (unlikely(!cinfo)) {
> + scmi_log_stats(info->dbg_stats,
> SENT_FAIL_CHANNEL_NOT_FOUND);
> return -EINVAL;
> -
> + }
> /* True ONLY if also supported by transport. */
> if (is_polling_enabled(cinfo, info->desc))
> xfer->hdr.poll_completion = true;
> @@ -1400,16 +1425,20 @@ static int do_xfer(const struct
> scmi_protocol_handle *ph,
> ret = info->desc->ops->send_message(cinfo, xfer);
> if (ret < 0) {
> dev_dbg(dev, "Failed to send message %d\n", ret);
> + scmi_log_stats(info->dbg_stats, SENT_FAIL);
> return ret;
> }
>
> trace_scmi_msg_dump(info->id, cinfo->id, xfer-
> >hdr.protocol_id,
> xfer->hdr.id, "CMND", xfer->hdr.seq,
> xfer->hdr.status, xfer->tx.buf, xfer->tx.len);
> + scmi_log_stats(info->dbg_stats, SENT_OK);
>
> ret = scmi_wait_for_message_response(cinfo, xfer);
> - if (!ret && xfer->hdr.status)
> + if (!ret && xfer->hdr.status) {
> ret = scmi_to_linux_errno(xfer->hdr.status);
> + scmi_log_stats(info->dbg_stats, ERR_PROTOCOL);
> + }
>
> if (info->desc->ops->mark_txdone)
> info->desc->ops->mark_txdone(cinfo, ret, xfer);
> --
> 2.34.1
>
Powered by blists - more mailing lists