linux-kernel - [PATCH v2 1/2] dmaengine: dw-edma: Fix unmasking STOP and ABORT interrupts for HDMA

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1721740773-23181-2-git-send-email-quic_msarkar@quicinc.com>
Date: Tue, 23 Jul 2024 18:49:31 +0530
From: Mrinmay Sarkar <quic_msarkar@...cinc.com>
To: manivannan.sadhasivam@...aro.org, fancer.lancer@...il.com,
        vkoul@...nel.org
Cc: quic_shazhuss@...cinc.com, quic_nitegupt@...cinc.com,
        quic_ramkri@...cinc.com, quic_nayiluri@...cinc.com,
        quic_krichai@...cinc.com, quic_vbadigan@...cinc.com,
        stable@...r.kernel.org, Mrinmay Sarkar <quic_msarkar@...cinc.com>,
        Cai Huoqing <cai.huoqing@...ux.dev>, dmaengine@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH v2 1/2] dmaengine: dw-edma: Fix unmasking STOP and ABORT interrupts for HDMA

The current logic is enabling both STOP_INT_MASK and ABORT_INT_MASK
bit. This is apparently masking those particular interrupts rather than
unmasking the same. If the interrupts are masked, they would never get
triggered.

So fix the issue by unmasking the STOP and ABORT interrupts properly.

Fixes: e74c39573d35 ("dmaengine: dw-edma: Add support for native HDMA")
cc: stable@...r.kernel.org
Signed-off-by: Mrinmay Sarkar <quic_msarkar@...cinc.com>
---
 drivers/dma/dw-edma/dw-hdma-v0-core.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/dma/dw-edma/dw-hdma-v0-core.c b/drivers/dma/dw-edma/dw-hdma-v0-core.c
index 10e8f07..fa89b3a 100644
--- a/drivers/dma/dw-edma/dw-hdma-v0-core.c
+++ b/drivers/dma/dw-edma/dw-hdma-v0-core.c
@@ -247,10 +247,11 @@ static void dw_hdma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
 	if (first) {
 		/* Enable engine */
 		SET_CH_32(dw, chan->dir, chan->id, ch_en, BIT(0));
-		/* Interrupt enable&unmask - done, abort */
-		tmp = GET_CH_32(dw, chan->dir, chan->id, int_setup) |
-		      HDMA_V0_STOP_INT_MASK | HDMA_V0_ABORT_INT_MASK |
-		      HDMA_V0_LOCAL_STOP_INT_EN | HDMA_V0_LOCAL_ABORT_INT_EN;
+		/* Interrupt unmask - STOP, ABORT */
+		tmp = GET_CH_32(dw, chan->dir, chan->id, int_setup) &
+		      ~HDMA_V0_STOP_INT_MASK & ~HDMA_V0_ABORT_INT_MASK;
+		/* Interrupt enable - STOP, ABORT */
+		tmp |= HDMA_V0_LOCAL_STOP_INT_EN | HDMA_V0_LOCAL_ABORT_INT_EN;
 		if (!(dw->chip->flags & DW_EDMA_CHIP_LOCAL))
 			tmp |= HDMA_V0_REMOTE_STOP_INT_EN | HDMA_V0_REMOTE_ABORT_INT_EN;
 		SET_CH_32(dw, chan->dir, chan->id, int_setup, tmp);
-- 
2.7.4