lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240725080119.GC2770@thinkpad>
Date: Thu, 25 Jul 2024 13:31:19 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: Mrinmay Sarkar <quic_msarkar@...cinc.com>
Cc: fancer.lancer@...il.com, vkoul@...nel.org, quic_shazhuss@...cinc.com,
	quic_nitegupt@...cinc.com, quic_ramkri@...cinc.com,
	quic_nayiluri@...cinc.com, quic_krichai@...cinc.com,
	quic_vbadigan@...cinc.com, stable@...r.kernel.org,
	Cai Huoqing <cai.huoqing@...ux.dev>, dmaengine@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 1/2] dmaengine: dw-edma: Fix unmasking STOP and ABORT
 interrupts for HDMA

On Tue, Jul 23, 2024 at 06:49:31PM +0530, Mrinmay Sarkar wrote:
> The current logic is enabling both STOP_INT_MASK and ABORT_INT_MASK
> bit. This is apparently masking those particular interrupts rather than
> unmasking the same. If the interrupts are masked, they would never get
> triggered.
> 
> So fix the issue by unmasking the STOP and ABORT interrupts properly.
> 
> Fixes: e74c39573d35 ("dmaengine: dw-edma: Add support for native HDMA")
> cc: stable@...r.kernel.org
> Signed-off-by: Mrinmay Sarkar <quic_msarkar@...cinc.com>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>

- Mani

> ---
>  drivers/dma/dw-edma/dw-hdma-v0-core.c | 9 +++++----
>  1 file changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/dma/dw-edma/dw-hdma-v0-core.c b/drivers/dma/dw-edma/dw-hdma-v0-core.c
> index 10e8f07..fa89b3a 100644
> --- a/drivers/dma/dw-edma/dw-hdma-v0-core.c
> +++ b/drivers/dma/dw-edma/dw-hdma-v0-core.c
> @@ -247,10 +247,11 @@ static void dw_hdma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
>  	if (first) {
>  		/* Enable engine */
>  		SET_CH_32(dw, chan->dir, chan->id, ch_en, BIT(0));
> -		/* Interrupt enable&unmask - done, abort */
> -		tmp = GET_CH_32(dw, chan->dir, chan->id, int_setup) |
> -		      HDMA_V0_STOP_INT_MASK | HDMA_V0_ABORT_INT_MASK |
> -		      HDMA_V0_LOCAL_STOP_INT_EN | HDMA_V0_LOCAL_ABORT_INT_EN;
> +		/* Interrupt unmask - STOP, ABORT */
> +		tmp = GET_CH_32(dw, chan->dir, chan->id, int_setup) &
> +		      ~HDMA_V0_STOP_INT_MASK & ~HDMA_V0_ABORT_INT_MASK;
> +		/* Interrupt enable - STOP, ABORT */
> +		tmp |= HDMA_V0_LOCAL_STOP_INT_EN | HDMA_V0_LOCAL_ABORT_INT_EN;
>  		if (!(dw->chip->flags & DW_EDMA_CHIP_LOCAL))
>  			tmp |= HDMA_V0_REMOTE_STOP_INT_EN | HDMA_V0_REMOTE_ABORT_INT_EN;
>  		SET_CH_32(dw, chan->dir, chan->id, int_setup, tmp);
> -- 
> 2.7.4
> 

-- 
மணிவண்ணன் சதாசிவம்

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ