linux-kernel - Re: [PATCH net-next 1/9] net: dsa: vsc73xx: fix phylink capabilities

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <ZqggU9zWlvBh5fOb@shell.armlinux.org.uk>
Date: Tue, 30 Jul 2024 00:05:55 +0100
From: "Russell King (Oracle)" <linux@...linux.org.uk>
To: Pawel Dembicki <paweldembicki@...il.com>
Cc: netdev@...r.kernel.org, Andrew Lunn <andrew@...n.ch>,
	Florian Fainelli <f.fainelli@...il.com>,
	Vladimir Oltean <olteanv@...il.com>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	Heiner Kallweit <hkallweit1@...il.com>,
	Linus Walleij <linus.walleij@...aro.org>,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH net-next 1/9] net: dsa: vsc73xx: fix phylink capabilities

On Mon, Jul 29, 2024 at 11:06:07PM +0200, Pawel Dembicki wrote:
> According datasheet, VSC73XX family switches supports symmetric and
> asymmetric pause and 1000BASE in FD only.

What about the configuration of the pause? I notice the mac_link_up()
method ignores tx_pause/rx_pause, and instead just does this:

        /* Flow control for the PHY facing ports:
         * Use a zero delay pause frame when pause condition is left
         * Obey pause control frames
         * When generating pause frames, use 0xff as pause value
         */
        vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_FCCONF,
                      VSC73XX_FCCONF_ZERO_PAUSE_EN |
                      VSC73XX_FCCONF_FLOW_CTRL_OBEY |
                      0xff);

which suggests only symmetric pause is supported by the driver _and_
it is always enabled irrespective of what was negotiated.

I think this needs to be fixed first, before changing the capabilities.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!