| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240804-sm8350-fixes-v1-2-1149dd8399fe@linaro.org>
Date: Sun, 04 Aug 2024 08:40:06 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Bjorn Andersson <andersson@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, Jonathan Marek <jonathan@...ek.ca>,
Robert Foss <rfoss@...nel.org>, Vinod Koul <vkoul@...nel.org>,
Rob Clark <robdclark@...il.com>, Abhinav Kumar <quic_abhinavk@...cinc.com>,
Sean Paul <sean@...rly.run>, Marijn Suijten <marijn.suijten@...ainline.org>,
David Airlie <airlied@...il.com>, Daniel Vetter <daniel@...ll.ch>,
Konrad Dybcio <konrad.dybcio@...aro.org>, Georgi Djakov <djakov@...nel.org>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Mike Tipton <quic_mdtipton@...cinc.com>,
Catalin Marinas <catalin.marinas@....com>, Will Deacon <will@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, linux-clk@...r.kernel.org,
linux-kernel@...r.kernel.org, dri-devel@...ts.freedesktop.org,
freedreno@...ts.freedesktop.org, linux-pm@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Subject: [PATCH 02/11] clk: qcom: dispcc-sm8250: use special function for
Lucid 5LPE PLL
According to msm-5.10 the lucid 5lpe PLLs have require slightly
different configuration that trion / lucid PLLs, it doesn't set
PLL_UPDATE_BYPASS bit. Add corresponding function and use it for the
display clock controller on Qualcomm SM8350 platform.
Fixes: 205737fe3345 ("clk: qcom: add support for SM8350 DISPCC")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
---
drivers/clk/qcom/clk-alpha-pll.c | 52 ++++++++++++++++++++++++++++++++++++++++
drivers/clk/qcom/clk-alpha-pll.h | 2 ++
drivers/clk/qcom/dispcc-sm8250.c | 9 +++++--
3 files changed, 61 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index d87314042528..d0b911499cf9 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -1831,6 +1831,58 @@ const struct clk_ops clk_alpha_pll_agera_ops = {
};
EXPORT_SYMBOL_GPL(clk_alpha_pll_agera_ops);
+/**
+ * clk_lucid_5lpe_pll_configure - configure the lucid 5lpe pll
+ *
+ * @pll: clk alpha pll
+ * @regmap: register map
+ * @config: configuration to apply for pll
+ */
+void clk_lucid_5lpe_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
+ const struct alpha_pll_config *config)
+{
+ /*
+ * If the bootloader left the PLL enabled it's likely that there are
+ * RCGs that will lock up if we disable the PLL below.
+ */
+ if (trion_pll_is_enabled(pll, regmap)) {
+ pr_debug("Lucid 5LPE PLL is already enabled, skipping configuration\n");
+ return;
+ }
+
+ clk_alpha_pll_write_config(regmap, PLL_L_VAL(pll), config->l);
+ regmap_write(regmap, PLL_CAL_L_VAL(pll), TRION_PLL_CAL_VAL);
+ clk_alpha_pll_write_config(regmap, PLL_ALPHA_VAL(pll), config->alpha);
+ clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL(pll),
+ config->config_ctl_val);
+ clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL_U(pll),
+ config->config_ctl_hi_val);
+ clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL_U1(pll),
+ config->config_ctl_hi1_val);
+ clk_alpha_pll_write_config(regmap, PLL_USER_CTL(pll),
+ config->user_ctl_val);
+ clk_alpha_pll_write_config(regmap, PLL_USER_CTL_U(pll),
+ config->user_ctl_hi_val);
+ clk_alpha_pll_write_config(regmap, PLL_USER_CTL_U1(pll),
+ config->user_ctl_hi1_val);
+ clk_alpha_pll_write_config(regmap, PLL_TEST_CTL(pll),
+ config->test_ctl_val);
+ clk_alpha_pll_write_config(regmap, PLL_TEST_CTL_U(pll),
+ config->test_ctl_hi_val);
+ clk_alpha_pll_write_config(regmap, PLL_TEST_CTL_U1(pll),
+ config->test_ctl_hi1_val);
+
+ /* Disable PLL output */
+ regmap_update_bits(regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
+
+ /* Set operation mode to OFF */
+ regmap_write(regmap, PLL_OPMODE(pll), PLL_STANDBY);
+
+ /* Place the PLL in STANDBY mode */
+ regmap_update_bits(regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
+}
+EXPORT_SYMBOL_GPL(clk_lucid_5lpe_pll_configure);
+
static int alpha_pll_lucid_5lpe_enable(struct clk_hw *hw)
{
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index df8f0fe15531..e2cf5c7e501d 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -208,6 +208,8 @@ void clk_agera_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
void clk_zonda_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
const struct alpha_pll_config *config);
+void clk_lucid_5lpe_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
+ const struct alpha_pll_config *config);
void clk_lucid_evo_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
const struct alpha_pll_config *config);
void clk_lucid_ole_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
diff --git a/drivers/clk/qcom/dispcc-sm8250.c b/drivers/clk/qcom/dispcc-sm8250.c
index eb78cd5439d0..884bbd3fb305 100644
--- a/drivers/clk/qcom/dispcc-sm8250.c
+++ b/drivers/clk/qcom/dispcc-sm8250.c
@@ -1360,8 +1360,13 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
disp_cc_sm8250_clocks[DISP_CC_MDSS_EDP_GTC_CLK_SRC] = NULL;
}
- clk_lucid_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
- clk_lucid_pll_configure(&disp_cc_pll1, regmap, &disp_cc_pll1_config);
+ if (of_device_is_compatible(pdev->dev.of_node, "qcom,sm8350-dispcc")) {
+ clk_lucid_5lpe_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
+ clk_lucid_5lpe_pll_configure(&disp_cc_pll1, regmap, &disp_cc_pll1_config);
+ } else {
+ clk_lucid_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
+ clk_lucid_pll_configure(&disp_cc_pll1, regmap, &disp_cc_pll1_config);
+ }
/* Enable clock gating for MDP clocks */
regmap_update_bits(regmap, 0x8000, 0x10, 0x10);
--
2.39.2
Powered by blists - more mailing lists