linux-kernel - [PATCH 03/11] drm/msm/dsi: correct programming sequence for SM8350 / SM8450

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240804-sm8350-fixes-v1-3-1149dd8399fe@linaro.org>
Date: Sun, 04 Aug 2024 08:40:07 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Bjorn Andersson <andersson@...nel.org>, 
 Michael Turquette <mturquette@...libre.com>, 
 Stephen Boyd <sboyd@...nel.org>, Jonathan Marek <jonathan@...ek.ca>, 
 Robert Foss <rfoss@...nel.org>, Vinod Koul <vkoul@...nel.org>, 
 Rob Clark <robdclark@...il.com>, Abhinav Kumar <quic_abhinavk@...cinc.com>, 
 Sean Paul <sean@...rly.run>, Marijn Suijten <marijn.suijten@...ainline.org>, 
 David Airlie <airlied@...il.com>, Daniel Vetter <daniel@...ll.ch>, 
 Konrad Dybcio <konrad.dybcio@...aro.org>, Georgi Djakov <djakov@...nel.org>, 
 Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, Mike Tipton <quic_mdtipton@...cinc.com>, 
 Catalin Marinas <catalin.marinas@....com>, Will Deacon <will@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, linux-clk@...r.kernel.org, 
 linux-kernel@...r.kernel.org, dri-devel@...ts.freedesktop.org, 
 freedreno@...ts.freedesktop.org, linux-pm@...r.kernel.org, 
 devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org, 
 Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Subject: [PATCH 03/11] drm/msm/dsi: correct programming sequence for SM8350
 / SM8450

According to the display-drivers, 5nm DSI PLL (v4.2, v4.3) have
different boundaries for pll_clock_inverters programming. Follow the
vendor code and use correct values.

Fixes: 2f9ae4e395ed ("drm/msm/dsi: add support for DSI-PHY on SM8350 and SM8450")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
---
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
index 3b59137ca674..031446c87dae 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
@@ -135,7 +135,7 @@ static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll, struct dsi_pll_config
 			config->pll_clock_inverters = 0x00;
 		else
 			config->pll_clock_inverters = 0x40;
-	} else {
+	} else if (pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1) {
 		if (pll_freq <= 1000000000ULL)
 			config->pll_clock_inverters = 0xa0;
 		else if (pll_freq <= 2500000000ULL)
@@ -144,6 +144,16 @@ static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll, struct dsi_pll_config
 			config->pll_clock_inverters = 0x00;
 		else
 			config->pll_clock_inverters = 0x40;
+	} else {
+		/* 4.2, 4.3 */
+		if (pll_freq <= 1000000000ULL)
+			config->pll_clock_inverters = 0xa0;
+		else if (pll_freq <= 2500000000ULL)
+			config->pll_clock_inverters = 0x20;
+		else if (pll_freq <= 3500000000ULL)
+			config->pll_clock_inverters = 0x00;
+		else
+			config->pll_clock_inverters = 0x40;
 	}
 
 	config->decimal_div_start = dec;

-- 
2.39.2