lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240805014422-mutt-send-email-mst@kernel.org>
Date: Mon, 5 Aug 2024 01:52:22 -0400
From: "Michael S. Tsirkin" <mst@...hat.com>
To: Jason Wang <jasowang@...hat.com>
Cc: xuanzhuo@...ux.alibaba.com, eperezma@...hat.com, davem@...emloft.net,
	edumazet@...gle.com, kuba@...nel.org, pabeni@...hat.com,
	virtualization@...ts.linux.dev, netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	Venkat Venkatsubra <venkat.x.venkatsubra@...cle.com>,
	Gia-Khanh Nguyen <gia-khanh.nguyen@...cle.com>
Subject: Re: [PATCH V5 net-next 3/3] virtio-net: synchronize operstate with
 admin state on up/down

On Mon, Aug 05, 2024 at 11:02:42AM +0800, Jason Wang wrote:
> This patch synchronize operstate with admin state per RFC2863.


synchronizes

> 
> This is done by trying to toggle the carrier upon open/close and
> synchronize with the config change work. This allows propagate status

to propagate

> correctly to stacked devices like:
> 
> ip link add link enp0s3 macvlan0 type macvlan
> ip link set link enp0s3 down
> ip link show
> 
> Before this patch:
> 
> 3: enp0s3: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
>     link/ether 00:00:05:00:00:09 brd ff:ff:ff:ff:ff:ff
> ......
> 5: macvlan0@...0s3: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
>     link/ether b2:a9:c5:04:da:53 brd ff:ff:ff:ff:ff:ff
> 
> After this patch:
> 
> 3: enp0s3: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
>     link/ether 00:00:05:00:00:09 brd ff:ff:ff:ff:ff:ff
> ...
> 5: macvlan0@...0s3: <NO-CARRIER,BROADCAST,MULTICAST,UP,M-DOWN> mtu 1500 qdisc noqueue state LOWERLAYERDOWN mode DEFAULT group default qlen 1000
>     link/ether b2:a9:c5:04:da:53 brd ff:ff:ff:ff:ff:ff

Add an empty line here pls.

> Cc: Venkat Venkatsubra <venkat.x.venkatsubra@...cle.com>
> Cc: Gia-Khanh Nguyen <gia-khanh.nguyen@...cle.com>
> Signed-off-by: Jason Wang <jasowang@...hat.com>
> ---
>  drivers/net/virtio_net.c | 78 +++++++++++++++++++++++++---------------
>  1 file changed, 50 insertions(+), 28 deletions(-)
> 
> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> index 0383a3e136d6..fc5196ca8d51 100644
> --- a/drivers/net/virtio_net.c
> +++ b/drivers/net/virtio_net.c
> @@ -2885,6 +2885,25 @@ static void virtnet_cancel_dim(struct virtnet_info *vi, struct dim *dim)
>  	net_dim_work_cancel(dim);
>  }
>  
> +static void virtnet_update_settings(struct virtnet_info *vi)
> +{
> +	u32 speed;
> +	u8 duplex;
> +
> +	if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_SPEED_DUPLEX))
> +		return;
> +
> +	virtio_cread_le(vi->vdev, struct virtio_net_config, speed, &speed);
> +
> +	if (ethtool_validate_speed(speed))
> +		vi->speed = speed;
> +
> +	virtio_cread_le(vi->vdev, struct virtio_net_config, duplex, &duplex);
> +
> +	if (ethtool_validate_duplex(duplex))
> +		vi->duplex = duplex;
> +}
> +
>  static int virtnet_open(struct net_device *dev)
>  {
>  	struct virtnet_info *vi = netdev_priv(dev);
> @@ -2903,6 +2922,15 @@ static int virtnet_open(struct net_device *dev)
>  			goto err_enable_qp;
>  	}
>  
> +	if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS)) {
> +		if (vi->status & VIRTIO_NET_S_LINK_UP)
> +			netif_carrier_on(vi->dev);
> +		virtio_config_driver_enable(vi->vdev);
> +	} else {
> +		vi->status = VIRTIO_NET_S_LINK_UP;
> +		netif_carrier_on(dev);
> +	}
> +
>  	return 0;
>  
>  err_enable_qp:
> @@ -3381,12 +3409,22 @@ static int virtnet_close(struct net_device *dev)
>  	disable_delayed_refill(vi);
>  	/* Make sure refill_work doesn't re-enable napi! */
>  	cancel_delayed_work_sync(&vi->refill);
> +	/* Prevent the config change callback from changing carrier
> +	 * after close
> +	 */
> +	virtio_config_driver_disable(vi->vdev);
> +	/* Stop getting status/speed updates: we don't care until next
> +	 * open
> +	 */
> +	cancel_work_sync(&vi->config_work);
>  
>  	for (i = 0; i < vi->max_queue_pairs; i++) {
>  		virtnet_disable_queue_pair(vi, i);
>  		virtnet_cancel_dim(vi, &vi->rq[i].dim);
>  	}
>  
> +	netif_carrier_off(dev);
> +
>  	return 0;
>  }
>  
> @@ -5085,25 +5123,6 @@ static void virtnet_init_settings(struct net_device *dev)
>  	vi->duplex = DUPLEX_UNKNOWN;
>  }
>  
> -static void virtnet_update_settings(struct virtnet_info *vi)
> -{
> -	u32 speed;
> -	u8 duplex;
> -
> -	if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_SPEED_DUPLEX))
> -		return;
> -
> -	virtio_cread_le(vi->vdev, struct virtio_net_config, speed, &speed);
> -
> -	if (ethtool_validate_speed(speed))
> -		vi->speed = speed;
> -
> -	virtio_cread_le(vi->vdev, struct virtio_net_config, duplex, &duplex);
> -
> -	if (ethtool_validate_duplex(duplex))
> -		vi->duplex = duplex;
> -}
> -
>  static u32 virtnet_get_rxfh_key_size(struct net_device *dev)
>  {
>  	return ((struct virtnet_info *)netdev_priv(dev))->rss_key_size;
> @@ -6514,6 +6533,9 @@ static int virtnet_probe(struct virtio_device *vdev)
>  		goto free_failover;
>  	}
>  
> +	/* Disable config change notification until ndo_open. */
> +	virtio_config_driver_disable(vi->vdev);
> +
>  	virtio_device_ready(vdev);
>  
>  	virtnet_set_queues(vi, vi->curr_queue_pairs);
> @@ -6563,25 +6585,25 @@ static int virtnet_probe(struct virtio_device *vdev)
>  		vi->device_stats_cap = le64_to_cpu(v);
>  	}
>  
> -	rtnl_unlock();
> -
> -	err = virtnet_cpu_notif_add(vi);
> -	if (err) {
> -		pr_debug("virtio_net: registering cpu notifier failed\n");
> -		goto free_unregister_netdev;
> -	}
> -
>  	/* Assume link up if device can't report link status,
>  	   otherwise get link status from config. */
>  	netif_carrier_off(dev);
>  	if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS)) {
> -		schedule_work(&vi->config_work);
> +		virtnet_config_changed_work(&vi->config_work);
>  	} else {
>  		vi->status = VIRTIO_NET_S_LINK_UP;
>  		virtnet_update_settings(vi);
>  		netif_carrier_on(dev);
>  	}
>  
> +	rtnl_unlock();


OK I guess you are moving rtnl to make sure this does not
run in parallel with ndo_open/close.
I do, however, wonder whether ndo_set_features
can happen before guest_offloads_capable calculation below.
WDYT?

> +	err = virtnet_cpu_notif_add(vi);
> +	if (err) {
> +		pr_debug("virtio_net: registering cpu notifier failed\n");
> +		goto free_unregister_netdev;
> +	}
> +
>  	for (i = 0; i < ARRAY_SIZE(guest_offloads); i++)
>  		if (virtio_has_feature(vi->vdev, guest_offloads[i]))
>  			set_bit(guest_offloads[i], &vi->guest_offloads);
> -- 
> 2.31.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ