Message-ID:
 <MA0P287MB2822B30C0665F36B08C8611BFEBE2@MA0P287MB2822.INDP287.PROD.OUTLOOK.COM>
Date: Mon, 5 Aug 2024 09:38:03 +0800
From: Chen Wang <unicorn_wang@...look.com>
To: Inochi Amaoto <inochiama@...look.com>, Jean Delvare <jdelvare@...e.com>,
 Guenter Roeck <linux@...ck-us.net>, Rob Herring <robh@...nel.org>,
 Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
 <conor+dt@...nel.org>, Jonathan Corbet <corbet@....net>,
 Paul Walmsley <paul.walmsley@...ive.com>, Palmer Dabbelt
 <palmer@...belt.com>, Albert Ou <aou@...s.berkeley.edu>,
 Guo Ren <guoren@...nel.org>, Chao Wei <chao.wei@...hgo.com>,
 Jinyu Tang <tangjinyu@...ylab.org>, Hal Feng <hal.feng@...rfivetech.com>,
 Yangyu Chen <cyy@...self.name>,
 Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Cc: linux-hwmon@...r.kernel.org, devicetree@...r.kernel.org,
 linux-kernel@...r.kernel.org, linux-doc@...r.kernel.org,
 linux-riscv@...ts.infradead.org
Subject: Re: [PATCH v9 2/4] drivers: hwmon: sophgo: Add SG2042 external
 hardware monitor support


On 2024/8/2 20:38, Inochi Amaoto wrote:
> SG2042 use an external MCU to provide basic hardware information
> and thermal sensors.
>
> Add driver support for the onboard MCU of SG2042.
>
> Signed-off-by: Inochi Amaoto <inochiama@...look.com>
> Tested-by: Chen Wang <unicorn_wang@...look.com>
> Reviewed-by: Chen Wang <unicorn_wang@...look.com>
> ---
>   Documentation/hwmon/index.rst      |   1 +
>   Documentation/hwmon/sg2042-mcu.rst |  39 +++
>   drivers/hwmon/Kconfig              |  11 +
>   drivers/hwmon/Makefile             |   1 +
>   drivers/hwmon/sg2042-mcu.c         | 394 +++++++++++++++++++++++++++++
>   5 files changed, 446 insertions(+)
>   create mode 100644 Documentation/hwmon/sg2042-mcu.rst
>   create mode 100644 drivers/hwmon/sg2042-mcu.c
>
> diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
> index 913c11390a45..ea3b5be8fe4f 100644
> --- a/Documentation/hwmon/index.rst
> +++ b/Documentation/hwmon/index.rst
> @@ -206,6 +206,7 @@ Hardware Monitoring Kernel Drivers
>      sch5636
>      scpi-hwmon
>      sfctemp
> +   sg2042-mcu
>      sht15
>      sht21
>      sht3x
> diff --git a/Documentation/hwmon/sg2042-mcu.rst b/Documentation/hwmon/sg2042-mcu.rst
> new file mode 100644
> index 000000000000..250016b47dd1
> --- /dev/null
> +++ b/Documentation/hwmon/sg2042-mcu.rst
> @@ -0,0 +1,39 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +Kernel driver sg2042-mcu
> +=====================
> +
> +Supported chips:
> +
> +  * Onboard MCU for sg2042
> +
> +    Addresses scanned: -
> +
> +    Prefix: 'sg2042-mcu'
> +
> +Authors:
> +
> +  - Inochi Amaoto <inochiama@...look.com>
> +
> +Description
> +-----------
> +
> +This driver supprts hardware monitoring for onboard MCU with
> +i2c interface.
> +
> +Usage Notes
> +-----------
> +
> +This driver does not auto-detect devices. You will have to instantiate
> +the devices explicitly.
> +Please see Documentation/i2c/instantiating-devices.rst for details.
> +
> +Sysfs Attributes
> +----------------
> +
> +================= =============================================
> +temp1_input       Measured temperature of SoC
> +temp1_crit        Critical high temperature
> +temp1_crit_hyst   hysteresis temperature restore from Critical
> +temp2_input       Measured temperature of the base board
> +================= =============================================
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index b60fe2e58ad6..7aa6c3f322e5 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -2066,6 +2066,17 @@ config SENSORS_SFCTEMP
>   	  This driver can also be built as a module.  If so, the module
>   	  will be called sfctemp.
>   
> +config SENSORS_SG2042_MCU
> +	tristate "Sophgo onboard MCU support"
> +	depends on I2C
> +	depends on ARCH_SOPHGO || COMPILE_TEST
> +	help
> +	  Support for onboard MCU of Sophgo SG2042 SoCs. This mcu provides
> +	  power control and some basic information.
> +
> +	  This driver can be built as a module. If so, the module
> +	  will be called sg2042-mcu.
> +
>   config SENSORS_SURFACE_FAN
>   	tristate "Surface Fan Driver"
>   	depends on SURFACE_AGGREGATOR
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index b1c7056c37db..0bbe812a67ae 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -194,6 +194,7 @@ obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o
>   obj-$(CONFIG_SENSORS_SCH5627)	+= sch5627.o
>   obj-$(CONFIG_SENSORS_SCH5636)	+= sch5636.o
>   obj-$(CONFIG_SENSORS_SFCTEMP)	+= sfctemp.o
> +obj-$(CONFIG_SENSORS_SG2042_MCU) += sg2042-mcu.o
>   obj-$(CONFIG_SENSORS_SL28CPLD)	+= sl28cpld-hwmon.o
>   obj-$(CONFIG_SENSORS_SHT15)	+= sht15.o
>   obj-$(CONFIG_SENSORS_SHT21)	+= sht21.o
> diff --git a/drivers/hwmon/sg2042-mcu.c b/drivers/hwmon/sg2042-mcu.c
> new file mode 100644
> index 000000000000..6d8d677f86f3
> --- /dev/null
> +++ b/drivers/hwmon/sg2042-mcu.c
> @@ -0,0 +1,394 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2024 Inochi Amaoto <inochiama@...look.com>
> + *
> + * Sophgo power control mcu for SG2042
> + */
> +
> +#include <linux/cleanup.h>
> +#include <linux/debugfs.h>
> +#include <linux/err.h>
> +#include <linux/hwmon.h>
> +#include <linux/i2c.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +
> +/* fixed MCU registers */
> +#define REG_BOARD_TYPE				0x00
> +#define REG_MCU_FIRMWARE_VERSION		0x01
> +#define REG_PCB_VERSION				0x02
> +#define REG_PWR_CTRL				0x03
> +#define REG_SOC_TEMP				0x04
> +#define REG_BOARD_TEMP				0x05
> +#define REG_RST_COUNT				0x0a
> +#define REG_UPTIME				0x0b
> +#define REG_RESET_REASON			0x0d
> +#define REG_MCU_TYPE				0x18
> +#define REG_REPOWER_ACTION			0x65
> +#define REG_CRITICAL_TEMP			0x66
> +#define REG_REPOWER_TEMP			0x67
As I mentioend in last review, suggest to add some clarification for 
CRITICAL and REPOWER. Due to no document from sophgo, I hope some 
comments in code for memo.
> +
> +#define REPOWER_ACTION_REBOOT			1
> +#define REPOWER_ACTION_POWEROFF			2
> +
> +#define MCU_POWER_MAX				0xff
> +
> +#define DEFINE_MCU_DEBUG_ATTR(_name, _reg, _format)			\
> +	static int _name##_show(struct seq_file *seqf,			\
> +				    void *unused)			\
> +	{								\
> +		struct sg2042_mcu_data *mcu = seqf->private;		\
> +		int ret;						\
> +		ret = i2c_smbus_read_byte_data(mcu->client, (_reg));	\
> +		if (ret < 0)						\
> +			return ret;					\
> +		seq_printf(seqf, _format "\n", ret);			\
> +		return 0;						\
> +	}								\
> +	DEFINE_SHOW_ATTRIBUTE(_name)					\
> +
> +struct sg2042_mcu_data {
> +	struct i2c_client	*client;
> +	struct dentry		*debugfs;
> +	struct mutex		mutex;
> +};
> +
> +static struct dentry *sgmcu_debugfs;
> +
> +static ssize_t reset_count_show(struct device *dev,
> +				struct device_attribute *attr,
> +				char *buf)
> +{
> +	struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
> +	int ret;
> +
> +	ret = i2c_smbus_read_byte_data(mcu->client, REG_RST_COUNT);
> +	if (ret < 0)
> +		return ret;
> +
> +	return sprintf(buf, "%d\n", ret);
> +}
> +
> +static ssize_t uptime_show(struct device *dev,
> +			   struct device_attribute *attr,
> +			   char *buf)
> +{
> +	struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
> +	u8 time_val[2];
> +	int ret;
> +
> +	ret = i2c_smbus_read_i2c_block_data(mcu->client, REG_UPTIME,
> +					    sizeof(time_val), time_val);
> +	if (ret < 0)
> +		return ret;
> +
> +	return sprintf(buf, "%d\n",
> +		       (int)(time_val[0]) + (int)(time_val[1] << 8));
> +}
> +
> +static ssize_t reset_reason_show(struct device *dev,
> +				 struct device_attribute *attr,
> +				 char *buf)
> +{
> +	struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
> +	int ret;
> +
> +	ret = i2c_smbus_read_byte_data(mcu->client, REG_RESET_REASON);
> +	if (ret < 0)
> +		return ret;
> +
> +	return sprintf(buf, "0x%02x\n", ret);
> +}
> +
> +static ssize_t repower_action_show(struct device *dev,
> +				   struct device_attribute *attr,
> +				   char *buf)
> +{
> +	struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
> +	int ret;
> +	const char *action;
> +
> +	ret = i2c_smbus_read_byte_data(mcu->client, REG_REPOWER_ACTION);
> +	if (ret < 0)
> +		return ret;
> +
> +	if (ret == REPOWER_ACTION_REBOOT)
> +		action = "reboot";
> +	else if (ret == REPOWER_ACTION_POWEROFF)
> +		action = "poweroff";
> +	else
> +		action = "unknown";
> +
> +	return sprintf(buf, "%s\n", action);
> +}
> +
> +static ssize_t repower_action_store(struct device *dev,
> +				    struct device_attribute *attr,
> +				    const char *buf, size_t count)
> +{
> +	struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
> +	u8 value;
> +	int ret;
> +
> +	if (sysfs_streq("reboot", buf))
> +		value = REPOWER_ACTION_REBOOT;
> +	else if (sysfs_streq("poweroff", buf))
> +		value = REPOWER_ACTION_POWEROFF;
> +	else
> +		return -EINVAL;
> +
> +	guard(mutex)(&mcu->mutex);
> +
> +	ret = i2c_smbus_write_byte_data(mcu->client,
> +					REG_REPOWER_ACTION, value);
> +	if (ret < 0)
> +		return ret;
> +
> +	return count;
> +}
> +
> +static DEVICE_ATTR_RO(reset_count);
> +static DEVICE_ATTR_RO(uptime);
> +static DEVICE_ATTR_RO(reset_reason);
> +static DEVICE_ATTR_RW(repower_action);
> +
> +DEFINE_MCU_DEBUG_ATTR(firmware_version, REG_MCU_FIRMWARE_VERSION, "0x%02x");
> +DEFINE_MCU_DEBUG_ATTR(pcb_version, REG_PCB_VERSION, "0x%02x");
> +DEFINE_MCU_DEBUG_ATTR(board_type, REG_BOARD_TYPE, "0x%02x");
> +DEFINE_MCU_DEBUG_ATTR(mcu_type, REG_MCU_TYPE, "%d");
> +
> +static struct attribute *sg2042_mcu_attrs[] = {
> +	&dev_attr_reset_count.attr,
> +	&dev_attr_uptime.attr,
> +	&dev_attr_reset_reason.attr,
> +	&dev_attr_repower_action.attr,
> +	NULL
> +};
> +
> +static const struct attribute_group sg2042_mcu_attr_group = {
> +	.attrs	= sg2042_mcu_attrs,
> +};
> +
> +static const struct attribute_group *sg2042_mcu_groups[] = {
> +	&sg2042_mcu_attr_group,
> +	NULL
> +};
> +
> +static const struct hwmon_channel_info * const sg2042_mcu_info[] = {
> +	HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ),
> +	HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_CRIT |
> +					HWMON_T_CRIT_HYST,
> +				 HWMON_T_INPUT),
> +	NULL
> +};
> +
> +static int sg2042_mcu_read(struct device *dev,
> +			   enum hwmon_sensor_types type,
> +			   u32 attr, int channel, long *val)
> +{
> +	struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
> +	int tmp;
> +	u8 reg;
> +
> +	switch (attr) {
> +	case hwmon_temp_input:
> +		reg = channel ? REG_BOARD_TEMP : REG_SOC_TEMP;
> +		break;
> +	case hwmon_temp_crit:
> +		reg = REG_CRITICAL_TEMP;
> +		break;
> +	case hwmon_temp_crit_hyst:
> +		reg = REG_REPOWER_TEMP;
> +		break;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +
> +	tmp = i2c_smbus_read_byte_data(mcu->client, reg);
> +	if (tmp < 0)
> +		return tmp;
> +	*val = tmp * 1000;
> +
> +	return 0;
> +}
> +
> +static int sg2042_mcu_write(struct device *dev,
> +			    enum hwmon_sensor_types type,
> +			    u32 attr, int channel, long val)
> +{
> +	struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
> +	int temp = val / 1000;
> +	int hyst_temp, crit_temp;
> +	u8 reg;
> +
> +	if (temp > MCU_POWER_MAX)
> +		temp = MCU_POWER_MAX;
> +	else if (temp < 0)
> +		temp = 0;
> +
> +	guard(mutex)(&mcu->mutex);
> +
> +	switch (attr) {
> +	case hwmon_temp_crit:
> +		hyst_temp = i2c_smbus_read_byte_data(mcu->client,
> +						     REG_REPOWER_TEMP);
> +		if (hyst_temp < 0)
> +			return hyst_temp;
> +
> +		crit_temp = temp;
> +		reg = REG_CRITICAL_TEMP;
> +		break;
> +	case hwmon_temp_crit_hyst:
> +		crit_temp = i2c_smbus_read_byte_data(mcu->client,
> +						     REG_CRITICAL_TEMP);
> +		if (crit_temp < 0)
> +			return crit_temp;
> +
> +		hyst_temp = temp;
> +		reg = REG_REPOWER_TEMP;
> +		break;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +
> +	/*
> +	 * ensure hyst_temp is smaller to avoid MCU from
> +	 * keeping triggering repower event.
> +	 */
> +	if (crit_temp < hyst_temp)
> +		return -EINVAL;
> +
> +	return i2c_smbus_write_byte_data(mcu->client, reg, temp);
> +}
> +
> +static umode_t sg2042_mcu_is_visible(const void *_data,
> +				     enum hwmon_sensor_types type,
> +				     u32 attr, int channel)
> +{
> +	switch (type) {
> +	case hwmon_temp:
> +		switch (attr) {
> +		case hwmon_temp_input:
> +			return 0444;
> +		case hwmon_temp_crit:
> +		case hwmon_temp_crit_hyst:
> +			if (channel == 0)
> +				return 0664;
> +			break;
> +		default:
> +			return 0;
> +		}
> +		break;
> +	default:
> +		return 0;
> +	}
> +	return 0;
> +}
> +
> +static const struct hwmon_ops sg2042_mcu_ops = {
> +	.is_visible = sg2042_mcu_is_visible,
> +	.read = sg2042_mcu_read,
> +	.write = sg2042_mcu_write,
> +};
> +
> +static const struct hwmon_chip_info sg2042_mcu_chip_info = {
> +	.ops = &sg2042_mcu_ops,
> +	.info = sg2042_mcu_info,
> +};
> +
> +static void sg2042_mcu_debugfs_init(struct sg2042_mcu_data *mcu,
> +				    struct device *dev)
> +{
> +	mcu->debugfs = debugfs_create_dir(dev_name(dev), sgmcu_debugfs);
> +	if (mcu->debugfs) {
> +		debugfs_create_file("firmware_version", 0444, mcu->debugfs,
> +				    mcu, &firmware_version_fops);
> +		debugfs_create_file("pcb_version", 0444, mcu->debugfs, mcu,
> +				    &pcb_version_fops);
> +		debugfs_create_file("mcu_type", 0444, mcu->debugfs, mcu,
> +				    &mcu_type_fops);
> +		debugfs_create_file("board_type", 0444, mcu->debugfs, mcu,
> +				    &board_type_fops);
> +	}
> +}
> +
> +static int sg2042_mcu_i2c_probe(struct i2c_client *client)
> +{
> +	struct device *dev = &client->dev;
> +	struct sg2042_mcu_data *mcu;
> +	struct device *hwmon_dev;
> +
> +	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA |
> +						I2C_FUNC_SMBUS_BLOCK_DATA))
> +		return -EIO;
> +
> +	mcu = devm_kmalloc(dev, sizeof(*mcu), GFP_KERNEL);
> +	if (!mcu)
> +		return -ENOMEM;
> +
> +	mutex_init(&mcu->mutex);
> +	mcu->client = client;
> +
> +	i2c_set_clientdata(client, mcu);
> +
> +	hwmon_dev = devm_hwmon_device_register_with_info(dev, "sg2042_mcu",
> +							 mcu,
> +							 &sg2042_mcu_chip_info,
> +							 NULL);
> +	if (IS_ERR_OR_NULL(hwmon_dev))
> +		return -EFAULT;
> +
> +	sg2042_mcu_debugfs_init(mcu, dev);
> +
> +	return 0;
> +}
> +
> +static void sg2042_mcu_i2c_remove(struct i2c_client *client)
> +{
> +	struct sg2042_mcu_data *mcu = i2c_get_clientdata(client);
> +
> +	debugfs_remove_recursive(mcu->debugfs);
> +}
> +
> +static const struct i2c_device_id sg2042_mcu_id[] = {
> +	{ "sg2042-hwmon-mcu", 0 },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(i2c, sg2042_mcu_id);
> +
> +static const struct of_device_id sg2042_mcu_of_id[] = {
> +	{ .compatible = "sophgo,sg2042-hwmon-mcu" },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, sg2042_mcu_of_id);
> +
> +static struct i2c_driver sg2042_mcu_driver = {
> +	.driver = {
> +		.name = "sg2042-mcu",
> +		.of_match_table = sg2042_mcu_of_id,
> +		.dev_groups = sg2042_mcu_groups,
> +	},
> +	.probe = sg2042_mcu_i2c_probe,
> +	.remove = sg2042_mcu_i2c_remove,
> +	.id_table = sg2042_mcu_id,
> +};
> +
> +static int __init sg2042_mcu_init(void)
> +{
> +	sgmcu_debugfs = debugfs_create_dir("sg2042-mcu", NULL);
> +	return i2c_add_driver(&sg2042_mcu_driver);
> +}
> +
> +static void __exit sg2042_mcu_exit(void)
> +{
> +	debugfs_remove_recursive(sgmcu_debugfs);
> +	i2c_del_driver(&sg2042_mcu_driver);
> +}
> +
> +module_init(sg2042_mcu_init);
> +module_exit(sg2042_mcu_exit);
> +
> +MODULE_AUTHOR("Inochi Amaoto <inochiama@...look.com>");
> +MODULE_DESCRIPTION("MCU I2C driver for SG2042 soc platform");
> +MODULE_LICENSE("GPL");

Powered by blists - more mailing lists