lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240807001408.fby2mjug3jym2lqs@synopsys.com>
Date: Wed, 7 Aug 2024 00:14:14 +0000
From: Thinh Nguyen <Thinh.Nguyen@...opsys.com>
To: Selvarasu Ganesan <selvarasu.g@...sung.com>
CC: Thinh Nguyen <Thinh.Nguyen@...opsys.com>,
        "gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
        "linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "jh0801.jung@...sung.com" <jh0801.jung@...sung.com>,
        "dh10.jung@...sung.com" <dh10.jung@...sung.com>,
        "naushad@...sung.com" <naushad@...sung.com>,
        "akash.m5@...sung.com" <akash.m5@...sung.com>,
        "rc93.raju@...sung.com" <rc93.raju@...sung.com>,
        "taehyun.cho@...sung.com" <taehyun.cho@...sung.com>,
        "hongpooh.kim@...sung.com" <hongpooh.kim@...sung.com>,
        "eomji.oh@...sung.com" <eomji.oh@...sung.com>,
        "shijie.cai@...sung.com" <shijie.cai@...sung.com>
Subject: Re: [PATCH] usb: dwc3: core: Prevent USB core invalid event buffer
 address access

On Mon, Jul 22, 2024, Selvarasu Ganesan wrote:
> This commit addresses an issue where the USB core could access an
> invalid event buffer address during runtime suspend, potentially causing
> SMMU faults and other memory issues. The problem arises from the
> following sequence.
> 	1. In dwc3_gadget_suspend, there is a chance of a timeout when
> 	moving the USB core to the halt state after clearing the
> 	run/stop bit by software.
> 	2. In dwc3_core_exit, the event buffer is cleared regardless of
> 	the USB core's status, which may lead to an SMMU faults and
> 	other memory issues. if the USB core tries to access the event
> 	buffer address.
> 
> To prevent this issue, this commit ensures that the event buffer address
> is not cleared by software  when the USB core is active during runtime
> suspend by checking its status before clearing the buffer address.

What happen after adding this check? Can the device resume and function
properly afterward? If not, do you know if a soft-reset will recover the
issue?

Thanks,
Thinh

> 
> Signed-off-by: Selvarasu Ganesan <selvarasu.g@...sung.com>
> ---
>  drivers/usb/dwc3/core.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index cb82557678dd..c7c1a253862e 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -559,8 +559,10 @@ int dwc3_event_buffers_setup(struct dwc3 *dwc)
>  void dwc3_event_buffers_cleanup(struct dwc3 *dwc)
>  {
>  	struct dwc3_event_buffer	*evt;
> +	u32				reg;
>  
> -	if (!dwc->ev_buf)
> +	reg = dwc3_readl(dwc->regs, DWC3_DSTS);
> +	if (!dwc->ev_buf || !(reg & DWC3_DSTS_DEVCTRLHLT))
>  		return;
>  
>  	evt = dwc->ev_buf;
> -- 
> 2.17.1
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ